Buscar en el registro

Employee was assisting another employee in moving a mobile hose crimp machine when the machine became unstable and overturned, striking the injured in the left ankle resulting in a fracture to the area

While attempting to pull a support shaft out of a grate, the shaft shifted and caught employees hand between the shaft and grating.

EE was turning on stairs landing to go up the stairs on Pellet Plant line 1 carriage up towards balling drum. EE felt pain in the right knee. No slip-fall occurred.

Technician has lower left side back pain that radiates to the hip that started after the 993K engine tune-up technician was trying to install the engine turn tool. the technician's body is in a awkward position with head tilted and arms up against the engine block while on a 2 step ladder. After trying first aid, EE finally went to the clinic on 2-9-26.

An employee positioning a used return roller for a conveyor pinched their left index finger, resulting in a laceration and sutures.

Employee was carrying parts, when EE's right foot got stuck in the mud and EE felt pain in EE's lower back.

Employee was making a shovel cable connection when the cable rolled, pulling the employee's left arm forward. The employee experienced left arm pain and was evaluated at the local ED where images revealed an injury to their left bicep. The employee was prescribed work restrictions and is being accommodated.

Employee was hosing in the crusher bowl when the employee tripped and fell landing on their left knee. Employee continued to work and felt something running down their leg when they observed a cut below the left knee. Employee was evaluated at the ER and received medical treatment (stitches).

An employee attempting to clear a jammed chain for a chain fall sustained a fracture to their left index finger.

Employee sustained and unknown injury to the left forearm while manipulating a lifter bar from the inside of the #1 Balling Mill.

Employees were positioning a roll crusher roller when the load shifted causing the roller to strike the injured employee's right foot resulting in three broken bones.

While moving a troughing roller frame assembly on 10 Conveyor, Line 3 in the Tilden plant, an employee pinched left thumb resulting in a laceration requiring 2 sutures.

Employee was inspecting a lube pump and removed the cover. After the inspection the employee proceeded to replace the cover when it slipped out of EE's hands. While attempting to catch the cover the employee's right middle finger went under the seesaw mechanism causing a fracture to the tip of the right middle finger.

Employee was in the process of installing the lock ring on a 240 ton haul truck tire when the ring snapped into place causing the clamp to make contact with the employee's right index finger resulting in a laceration.

The employee was unblocking the 11 launder and lifted a grate. After pulling the second grate, the first cover landed on the employee's right hand causing a laceration.

Employee reported pain in their left shoulder while moving a case of boosters from a service truck to a cart. Employee was later prescribed restrictions 4-17-2025.

On 4/5/2025, an incident was reported where an employee took off their hard hat to brush away dust, subsequently getting material in their left eye. The employee had reported the incident their following shift.

An employee attempted to throw a 3 pound rail anchor into the back of a grapple truck, but the rail anchor ricocheted off the sideboard of the truck instead of landing in the back and struck another employee standing nearby in the mouth, lacerating the employee's upper lip and fracturing the employee's upper jaw.

A hose released pressure causing an abrasion to the left cheek. Employee said they were loosening and wiggling the hose and valve connection when it made a pop and they felt the oil hit to their cheek. Spray of oil happened and only lasted a split second.

While attempting to remove a wrapper rod, it fell down and struck employee in the right hand.

Plant repairperson was discarding worn return roller into dumpster when the employee pinched their left index finger between the return roller and the dumpster. The employee sustained crushing injuries to their left index finger resulting in medical treatment.

While pulling a 20' long 2"x2"x1/4" stick of angle iron off a rack, the employee felt pain in their left elbow. The employee worked the rest of their shift, but then went to a local clinic on their own accord the following day for an evaluation without informing the company. This evaluation resulted in lost workdays.

Maintenance mechanic ruptured their left biceps tendon while opening the cab door of haul truck 78. The cab door was frozen after the mechanic washed the truck in the wash bay.

Employee was opening a sliding steel pocket door to the complete open position when they pinched their right pinky finger between a latch and the door frame.

While lifting a hoist and chains up and out of the way of a rail car truck side frame on the floor, the chains caught the frame, causing it to fall to the side and land on the employees left foot. The employee was wearing metatarsal safety-toed boots at the time. The employee suffered three fractures in their left foot and toes.

While an employee was working on a haul truck, dirt and debris fell from an above platform on the truck, some of which, landed in the employee's left eye. The employee sought medical attention. The eye was numbed, dirt or debris was extracted from the eye, and prescription eye drops were administered.

Worker was working on installing a driveline on a DR412i equipment. One side was connected and the other end of the driveline fell. Worker's hands were trapped between driveline and pumps. Worker removed both hands after getting pinched adding to the injury. Worker climbed out of pump area and off the machine.

Employee pinched the right thumb between a pipe support and existing steel structure resulting in a fractured thumb.

While lowering a removable mantle hand railing down on a mantle cart, the employee's left hand was in the line of fire, injuring two fingers. One finger suffered a laceration requiring sutures and another finger suffered a hairline fracture requiring a brace.

An employee was removing a sheave when the sharp edge of the sheave sliced through the employees' glove and into their left thumb.

While a summer student was sweeping, a 20-pound tire knife oven no longer in service on a shelf on a wall approximately 4 feet above the floor fell on EE's right hand, fracturing two bones in the hand. The employee's broom caught the power cord to the oven, causing the oven to fall off a shelf.

An employee was removing a cutting edge from a Cat 988 Loader when a sharp bolt head sliced through the employee's glove and into their left palm.

Employee was mounting haul truck tire on a five piece rim when EE pinched the index and middle finger of right hand between the lock ring and the bead seat of the tire resulting in a break of the bones on the tip of the right middle and index fingers.

Employee was in the process of hauling a used troughing roller to a flat bed truck when they dropped the roller on their right hand resulting in a laceration.

Employee was fueling and servicing a rock truck when EE was struck by a fuel hose and knocked to the ground.

Technician was moving a plate/cover on a Terex crane RT780 and while performing this task EE felt pain in their back area. The part lifted weighed approximately 20 to 25 pounds. There is no way to lift it with the truck crane.

While adjusting a coupler on a locomotive, the employee felt discomfort in their right bicep. This was originally a report only, as there was not a reportable injury at the time. This discomfort led to a few medical follow-ups and ultimately surgery on Jan 9, 2025.

Employee was shoveling at break 2 on the No. 1 belt when EE felt pain in neck and right shoulder. Cat scan showed spondylosis in EE's neck and that there was no new damage to the neck.

Employee was closing the access door on the 4 drill when their glove caught the latch pin pulling their left hand into the gap between the door and frame, causing a cut on their hand.

The employee was changing out of work clothes, and something got into left eye, employee was later diagnosed with a scratched cornea.

Employee was erecting a scaffold. Employee was attempting to pull two aluminum planks together and felt a "pop" in left arm.

Employee was assisting in positioning some steel channel in a storage location. As the channel was being moved, the employee pinched the left thumb between the two pieces resulting in a hairline fracture.

Employee states that while changing idlers on the 5/10 shuttle in the filter building, EE pinched their left pinky finger between the idler rack and the support beam.

While installing a window on a locomotive, microscopic pieces of glass chipped off the window and landed somewhere on the employee. Some of the glass made its way into the employee's eyes at some point throughout the day and the employee began to feel discomfort. The employee had to seek medical attention; eyes were numbed and the glass was extracted.

Employee was placing a wood crib block under a belt tailpiece. They placed their left hand on the end of the crib block and when they pushed the block in place, they caught their middle fingertip between the crib block and tail roller bearing.

EE was spinning on 15/16" lug nuts onto split rim from forklift and felt discomfort and soreness in the left wrist.

Service truck driver assigned to work as labor for shift. Moving heavy objects during shift. Employee stated feeling pain when pushing on a cable reel to center it onto the arms of the truck spool holder. Returned to work, week later was seen by physician and referred to physical therapy. No restrictions and a series of physical therapy has began.

While placing a scaffolding section in 4c crusher base, employee pinched their right pinky finger between the scaffolding section and some rocks at the bottom of the base. Resulting laceration required 2 sutures.

Mechanic's hand was briefly pinched between a hydraulic shovel roller assembly and the shovel frame during installation. Contact occurred when the assembly being installed unexpectedly pivoted upward while the mechanic's hand was on top of it. Nondisplaced fracture of the second metacarpal bone, right hand.

An employee was removing a rock from the top of a grader blade when the operator experienced pain in their shoulder.