Buscar en el registro

Employee was shoveling around shale end area. While being at home employee started to feel pain around the shoulder area.

Employee was cleaning underneath # 19 conveyor belt and catwalk. When employee raised EE's head, EE struck the catwalk structure with the head. Employee felt pain to the neck.

I/E was lifting bags of cement and dumping them in a mixing sack. I/E felt back pop.

Employee was removing five gallons sample buckets from a pickup when they felt a pain in the lower back.

Employee experienced shoulder pain while opening and closing a window in the office. Employee was sitting down while opening the window, overextending shoulders. The pain progressed throughout the week. Employee requested to go to the doctor on 12/18/2017.

Employee was attempting to close a door on the water truck. The door would not close. Employee tried using excessive force while attempting to close the door. EE hit elbow on the structure of the truck and twisted left hand in the door handle.

While pulling the 8 gauge shotgun stand out of the #2 hood after shooting a ring, one of the wheels of the shotgun stand came apart and made it more difficult for the employee to pull the gun. The employee continued pulling the shotgun stand and twisted left knee.

Employee was taking a sample from the kiln. Employee noticed a pain in right shoulder. Doctor placed employee on restrictive duty.

Employee was pulling a water hose in a man-lift. EE was attempting to wash the number #2 scrubber tank. As EE tried to lift the water hose, EE felt a pain in lower back. Employee went to the doctor on 1-23-17. The doctor released EE to regular duty without restrictions on 1-23-17. EE went to EE's own doctor on 2/3/2017 and was put on restricted duty.

Employee finger got caught in the step grating after exiting the service truck causing pain on the right ring finger.

Employee was replacing the rear tire on a service truck. Employee was trying to lift the old tire into another truck when the employee felt soreness in lower back.

Employee and a co-worker were removing port-a-power heads from under kiln. The third and last one slipped out of co-workers hand and employee could not get their hand away in time and the head caught the end of EE's finger. The tip of the middle finger was broken and lacerated by the 275 pound port-a-power head.

Employee was trying to remove a metal door on the disentegrator. As the door came loose ee lost grip. The door fell and smashed left wrist.

On 1/12/16 employee was cleaning up a material spill. EE thought EE had pulled a muscle in EE's stomach. Employee reported the injury to EE's shift supervisor. However, the supervisor did not report the injury to the plant manager. On 1/25/16 employee went to EE's primary doctor. The doctor informed the employee that EE had a hernia.

Employee was cleaning out extruder. The chute that drops down to run out the plugs, slipped and smashed his right ring finger.

Employee strained his shoulder while pushing a guard back in place. Employee did not report injury until the following Monday. After his first visit to the doctor we was NOT given restrictions. He went to is own doctor and was put on restrictions weeks later.

Employee was lifting a 5 gallon sample bucket of light weight aggregate. She felt a strain in her back. Doctor put her on restricted duty.

Employee was attempting to throw a rope over a portable water tank that was loaded on a flat bed trailer. When he threw the rope he felt a sharp pain in his left arm. Doctor put employee on restricted duty.

EE's were installing a dogbone, the dogbone slipped off the shaft smashing hand of other EE. The bone slipped of the cooler side shaft. The injured employee reached up to keep the bone from striking another employee in the head, when he did, it caught his hand in between dogbone and chain.

Employee was moving oil barrels in shop and pulled a muscle in his lower left back.

Employee was replacing rollers on a conveyor belt. He was trying to force the roller frame between the belt, he lost his grip and smashed his left index finger between the roller frame and conveyor frame.

EE was working inside a material chute. He was using a cutting torch to re-fabricate the shoot. A piece of slag fell down his shirt. He moved to quick and twisted his knee. EE has a strained MCL.

Employee was helping replace a shaft on a gear box. They were trying to beat the opposite side with a hammer. While holding the opposite side the gear box, it slipped and hit his hand. A small peace of metal was stuck in his left hand.

Employee lifted a 10 inch pipe into bed of truck and while setting it down the pipe rolled and struck his left wrist causing fracture. employee was released to restricted duty.

The employee was greasing the plant and rock fell between the screen and guard. The rock struck him on the lip.

Employee was standing under overhead hopper when a 2.5 inch rock fell and struck on left shoulder, employee was examined by physician and was release to regular duty, employee followed up with physician on 3/28/13 and was put on restricted duty due to soreness until 4/11/13 follow up visit.

EE was cutting steel I-beams into 8' lengths. After making cut, slag was still holding the cut together, EE picked up the opposite end and dropped it to break the slag. As he did this, the I-beam caught his glove and smashed his right ring finger between two pieces of I-beam.

Employee was helping rotate a suction hose to connect to the a de-watering pump when he said he felt a pop in his right shoulder, he was examined by a physician and was returned to work with restrictions, and will follow up with doctor on May 20th.

EE and two other employees were installing new chains on an Eagle Crusher. The bar the chains were on slipped out of the bracket they were being attached to and struck EE's left thigh causing pain. EE was examined by a physican and returned to restricted duty. He will follow up with physican.

Employee dropped water bottle in Cat D30 Haul unit air condition vent hole, while retrieving the bottle, employee injuried right ring finger tip when finger made contact with blower fan. While getting first aid treatment in the office, the employee fainted and broke his front tooth when he hit the desk.

Employee hurt left knee while placing Boring Bar into hole on an Excavator.

While checking front windshield wiper, the wiper became stuck, emplyee got out and found a 1.5 inch diameter rock stuck at the base of the wiper, he grabbed the rock with his left index finger and thumb and pulled back on it, the rock and the wiper started to move back to the start position, catching the left thumb between the wiper arm assembly, caused a fracture on left thumb.

EMPLOYEE ALLEGES THAT HE HURT HIS LEFT SHOULDER WHILE ROLLING A HYDRAULIC HOSE. EMPOLYEE WAS TREATED BY AN M.D. AND RETURNED TO WORK ON RESTRICTED DUTY AND WILL FOLLOW UP WITH HIS DOCTOR IN TWO WEEKS.

Employee atempted to use rope to stop barge. While pulling up to dredge to re-fuel, employee wrapped the rope around the handrail on the barge while it was still moving, causing a cut on his right ring finger when his hand became entangled in the rope.

Employee pulled on a rubber soap hose and it struck him in his left eye. Causing pain and redness, he was seen by doctor and released to regular duty, with a follow-up appointment on the 1-28-08.

employee was swiping dirt off of trailer ramp with his right hand and a sliver of metal cut through his glove and little finger. Employee received stiches and was released to light duty. Employee will have stiches removed in 10 days.

Employee was placing wheel hub on water truck axle and felt pain in his lower back. The employee sought medical care the following day and was told he strained his back. He was restricted to light duty work until 11/01/2007.

While unwinding grease hose from hose reel, employee felt a burning sensation in his abdomen, thought he had just pulled a muscle, however the pain persisted. The following day he told his supervisor. The employee went to the doctor, who took him off work due to a possible hernia and was refered to a specialist.

Employee was greasing WA 500 Komatsu Front-end lader, when the grease gun hose detached from the grease fitting and sprayed employees face and right eye. He recieved medical treatment the following day for swelling in his right eye, the doctor prescribed eye drops and was released to full duty on September 29, 2006.

Employee was cutting out a wall on a classifier with a cutting torch when he heard a popping sound, he then stopped cutting and looked around to see where the popping sound had come from, he then heard a second pop, and felt a burning sensation on his right forearm and thumb. the plant manager drove the employee to hospital, where he was treated and release to work.

Employee was hooking welding trailer to pick-up and was not lined up with trailer and tried to pull trailer to align with pick-up and strained his back. He was seen by a doctor on 5/3/06 and was told he strained his back. He was returned to work with restrictions and wil follow up with doctor on 5/12/06.

On 3/25/06, EE told his supervisor that his back was aching. On 3/27/06, EE wanted to see a Dr. He stated that his back had been hurting for a couple of weeks and believed pain was caused from a previous back injury several years ago. The Dr. asked EE what he had done and EE said his normal job duties, and on Saturday he had removed a pulley from a motor shaft.

Employee hurt right shoulder while adjusting tail pulley on feeder belt. He reported injury to plant manager but did not want to see a doctor at this time. On April 4, 2006 he requested to see a doctor and later was referred to an orthopedic doctor and is waiting to be scheduled for minor corrective surgery.

Employee was tightening air line on Euclid b-30 haul unit when coupling broke and air blew dirt in left eye. Employee went to the doctor and was prescribed ointment for eye and returned to regular duty.

Greased U-joints in center of truck, hit top backing from under truck putting grease on back of shirt.

EMPLOYEE WAS HELPING LOAD STEPS INTO BACKHOE BUCKET. THE STEPS SLID IN THE BUCKET, SCRAPING EMPLOYEE ON THE LEFT THIGH CAUSING A BRUISE. EMPLOYEE WENT TO SEE THE DOCTOR AND WAS RETURNED TO LIGHT DUTY.

Replacing screens on shaker ee pulled on screen and cut left index finger. had nine stitches at walls reg. hosptial emergency room.

REPLACING SCREENS ON SHAKER AT PLANT. CAUSED PAIN TO BACK.

REMOVING BELLY PAN FROM DOZER. BELLY PAN FELL ON RIGHT HAND.

PUSHING PIPE RIGHT THUMB GOT SMASHED BETWEEN PIPE AND HAND RAIL.