Buscar en el registro

Operator was setting up to fill the hydraulic oil on the Wirtgen 2200 Surface Miner. This involves hinging a plate metal cover back to access the tank cap. After the cover was hinged back, operator placed EE's left arm on the top step. The cover swung down from it's position, striking the operators left arm causing a fracture to the forearm/wrist area.

Maintenance tech was replacing a faulty LCL Filter in a drive cabinet. After filter was replaced, tech was moving old filter to get it out of the electrical room. Filter has casters but they are locked in place. When attempting to rotate the filter, the unit tipped over. Tech attempted to stop it and felt a pain in left arm.

Employee was assisting in cleaning up around the ready line area when they were loading up broken wood and pallets into the loader bucket. The injured employee attempted to pick up a pallet that was partly buried under some dirt and felt a pop in left bicep.

Employee was shoveling material when they stepped on a loose rock. Employee went to doctor and received prescription medication. Employee returned to work with no restrictions.

While descending from the fuel truck, ee felt pain in right knee. The day of the incident ee was given first aid. EE went to a doctor on 01/14/2020 and scheduled an MRI. Surgery was scheduled for 02/14/2020. EE missed EE's first shift on 02/17/2020

EE was performing start of shift maintenance on KPI 4250 (Rock Crusher) attempting to add anti-freeze to the radiator the EE fell approx 5ft from the position where they were standing to the crusher deck. EE was treated in the local ER diagnosed with a right AC joint separation, Non displacement fracture to C4, and two broken ribs. The EE was treated and released from the ER.

A mechanic felt pain in lower back when repairing the guarding on a tail pully at the crusher. EE came to work the next day and the pain had increased and EE went to see a chiropractor. EE was directed by the chiropractor to stay home. EE was give a full release for work by the chiropractor on 12/10/2018.

While making shop repairs to a spare mixer assembly, technician turned the internal rotor. The rotor became momentarily seized and released before the technician could remove their hand. Finger caught between the rotor assembly and the lid, causing the loss of a portion of the distal phalange, 1/3 of the fingernail, on the left ring finger.

Employee repairing lubrication system, climbing off machine to get more parts, hung ring on step while descending to ground level.

driller closed hand in door of drill rig and received 7 stitches on middle finger

An ATS contractor was working near the primary crusher shop while constructing guarding. The contractor was pulling a 6-8 foot section of expanded metal from the back of a flat bed truck. As the employee pulled the metal from the truck, it got stuck. The contractor responded by pulling harder. The metal broke free, flipped over and cut his lip.

Employee strained back while bending over to grease conveyor on 12/9/13. The injury became reportable on 12/13/13 due to Dr. restrictions.

Quarry Crusher Operator was exiting the PC House at an angle twisting his left ankle when his foot encountered the ground.

Two mine mechanics were attempting to replace 6 worn belts for our primary crusher. These belts drive the flywheel that power the jaw of our crusher. While attempting to place the 4th belt on, the injured miner had his hand caught between pulley and belt. He fractured his left middle finger. It was locked out.

BENT OVER TO PICK UP PAPER OUT OF CONTROL ROOM FLOOR, FELT SHARP PAIN IN LOWER BACK.

REMOVING TIRE AND WHEEL FROM 773 B CAT TRUCK ADN STRAIN WE BACK.

EMPLOYEE STATED HE WAS HANGING MINER CABLE AND STRAINED THE LEFT SIDE OF HIS STOMACH.

EMPLOYEE STATED HE SHOVELING #2 BELT & TWISTED HIS LEFT KNEE

EMPLOYEE STATED HE WAS LOADING A LOADING ARM PICK IN A SCOOP BUCKET & HIT HIS LEFT KNEE.

EE WAS REMOVING LIDS OFF 3 MINER AND STRAINED HIS LOWER BACK AND RIGHT HIP.

EMPLOYEE STATED HE WAS MOVING A BOARD ACROSS LOW BOY TRAILER WHEN HE HURT HIS BACK.

EMPLOYEE STATED HE WAS BENDING OVER TO PICK UP BUCKE TIWTH SAMPLE AND PERC. IN IT. WHEN HE PICKED UP THE BUCKET, HE HAD PAIN IN LOWER BACK.

EMPLOYEE STATED HE WAS REPLACING SECTION OF PIPE OVER CLEAN COAL FILTER. WHILE CLIMBING DOWN FROM TOP OF FILTER, HE PULLED SOMETHING IN HIS BACK OR SIDE, CAUSING SHARP PAIN AND TROUBLE BREATHI NG.

EMPLOYEE WAS USING A CHAIN FALL TO LIFT CHUTE SO THAT IT COULD BE TURNED OVER. WHEN CHUTE WAS LIFTED OFF OF FLOOR IT SLID BACK CATCHING LEFT HAND BETWEEN CHUTE & A BOLT STICKING OUT ON ANOTHER CHUTE.

EMPLOYEE WAS PUTTING PANEL BOARD COVER BACK ON SHUTTLE CAR AND IT SLIPPED AND FELL ON HIS RIGHT HAND.

EMPLOYEE WAS LIFTING A STEEL BEAM AND IT FELL ON HIS RIGHT INDEX FINGER.

PICKING UP BELT STRUCTURE AND HURT LOWER BACK

HE WAS HANGING MINER CABLE AND STRAINED HIS LOWER BACK.

EMPLOYEE STATED HE WAS OPENING A 5 GAL. BUCKET OF OIL WHEN HE HAND SLIPPED, CUTTING HIS RIGHT HAND ON BUCKET'S LID.

INJURED WAS MOVING TAIL ROLLER. SLING BROKE DROPPING ROLLER ON TOE NEXT TO LITTLE TOE ON RIGHT FOOT.

EE STATED HE WAS SHOVELING THE BELT AND STRAINED HIMSELF WHILE LIFTING SHOVEL FULL OF COAL.

54730TURNING JACK IN CHAIN VICE AND STRAINED STOMACH.

EMPLOYEE STATED HE WAS PULLING MINER CABLE AND STRAINED HIS LEFT SIDE.

EMPLOYEE HAD A PIECE OF WIRE IN HIS HAND AND WHEN HE TURNED HIS HEAD AROUND HE ACCIDENTALLY HIT HIMSELF IN THE RIGHT EYE.

EMPLOYEE STATED HE WAS SHOVELING #6 BELT DRIVE AND STRAINED HIS LOWER BACK, WHILE THROWING A SHOVEL OF MUD ON BELT LINE.

EE WAS PULLING THE CABLE OFF OF ROOF BOLTER REEL AND STRAINED HIS LEFT ARM.

EMPLOYEE WAS ENGAGED IN HIS NORMAL DUTY FOR THE SHIFT. THE WORK HAD ENDED FOR THE WEEK AND WHEN TIME CAME FOR THE EMPLOYEE TO REPORT ON MONDAY THE 17. HE CALLED TO SAY HIS BACK HAD BEEN HURT ON THE LAST DAY OF WORK IN THEPRECEEDING WEEK.

HANGING MINER CABLE STRAINED HIS LOWER BACK

HE WAS TAKING LOAD OF RAILS UNDERGROUND & ONE END OF RAIL FELL OFF OF CAR & HE WAS ATTEMPTING TO LIFT IT BACK ON CAR & STRAINED STOMACH.

EMPLOYEE STATED HE TRIED TO LOOK UNDER SCREEN LIFTING EYE BROKE, SCREEN FELL AND HIT HIM ON LEFT TEMPLE.

PUTTING CHAIN AROUND BUNDLE OF BELT ROLLERS ONE ROLLER TURNED OVER LANDING ON SHOULDER AN ARM OF INJURED.

HE WAS PULLING MINER CABLE SLACK & STRAINED HIS LOWER BACK

EMPLOYEE REPORTED TO THE MINE MANAGER HE HAD HURT HIS BACK IN THE PROCESS OF THE DAY.HE THEN WORKED THE DAY OUT AND THE NEXT 4 DAYS AT THIS TIME THE EMPLOYEE SAID HE WOULD GO TO THE DOCTOR ON MONDAY THE 24TH OF JUNE 1991.THE EMPLOYEE SAID HE HURT HIS BACK WHENHE LIFTED THE SAMPLE GATE AT THE SCALE HOUSE ON 06-13-91.

HE WAS LOADING A MINER CABLE IN SCOOP & STRAINED HIS LOWER BACK

HE WAS HELPING CHANGE A BELT ROLLER AND WAS THROWING THE OLD ONE OFF CAT WALK AT STACKER BELT AND THE ROLLER CAUGHT HIS LEFT HAND AND CUT IT.

THE EMPLOYEE WAS GETTING OUT OF A SCOOP DECK AND HE HIT HIS HEAD ON A BELT HANGER THAT WAS HANGING FROM THE ROOF STRAINING HIS NECK.

EMPL WAS UNLOADING 6' TIMBERS ON 004 UNIT AT END OF TRACK & STRAINED BACK.

PICKED UP COUPLING FOR MOTOR SHAFT AND WAS PLACEING IN CHUCK OF LATHE.

RUBBED EYE GOT A PIECE OF DIRT IN EYE.

BENT OVER TO PICK UP ANGLE IRON THAT WAS FROZEN TO THE GROUND. PULLED ON ANGLE AND INJURED BACK.