Buscar en el registro

Employee was performing maintenance. Employee was removing rock from the jaw crusher. They put a rock back into the feeder and the rock slipped from their hand causing their hand to be pinched between two rocks.

Employee was moving rock on the back side of the rock box of the jaw crusher. EE's left pinky finger was caught between rock and the rock box. Laceration on outside of left pinky.

Employee was removing flip gates from bypass chute. Right thumb was pinched between the side liner and flip gate.

Employee was changing the bucket on the skid steer. EE was using foot as a brace while pulling on the bucket to latch it into place. The bucket slipped before it was latched and smashed top of left foot and big toe area.

Taking a block of wood out from under some angle iron on a trailer. Finger got smashed between a piece of angle iron and the trailer. Tip of middle finger on left hand was torn off to the bone(nail was torn off), tip of finger was broken.

Employee was working on stacker head section and became entangled in head pulley causing a dismemberment of right arm.

Employee was assisting with torquing the rear end of a truck and his ankle gave out. Did not step on anything, shifted his weight and heard ankle pop.

Employee was pushing the feeder back over the HP500 cone crusher. The plate that shuts the bin off had shifted enough to one side that it fell down, hitting employee on back lower part of leg below knee area.

Employee was pushing the feeder back over the HP500 cone crusher. The plate that shuts the bin off had shifted enough to one side that it fell down, hitting employee on back lower part of leg below knee area.

Employee was cleaning up debris (dirt, dust) around the jaw crusher with a flat shovel for about 20 minutes. The next day he started complaining about back pain. The following day (March 23/2011)he came to work with the same problem and was sent to see a doctor.

Employee was getting ready to pick up 200 lb shaft with crane when another contractor pulled on sling to tighten it. While employee was looking up at the hook being lowered, shaft rolled off stand and landed on right foot behind steel toe. Other contractor didn't speak up to alert employee.

IE was crawling under gyratory crusher twisting and bending to perform maintenance. Later that night IE noticed knee was swollen. He wrapped in ice. On 4/20/10, IE was working on a jaw crusher and his knee began to hurt again. He noticed fluid build up under the knee cap. On 4/29/10, he went to doctor who drained the fluid and cleaned out area around joint.

Plant personnel were loading jaw dies onto pickup truck, for return to Warfordsburg, using a wheel loader with a chain. Employee tried to steady swinging jaw die, when it pushed against straightened left arm and caused cracking sound in left shoulder. A small amount of pain immediately appeared in his left shoulder.

Employee was bent over parts washer rack and was getting ready to lift starter from rack. As he picked up on the starter, he sneezed and felt a pop in his belly area. He has been diagnosed with an umbilical hernia. A 2-ton job hoist is available to be used to lift items out of the parts washer and employee has been instructed to use it more frequently during all lifting.

Employe was holding a piece of sheet metal while working on a piece of equipment. He lost his grip and the metal cut his left pinkie finger.

Employee was collecting a test sample of stone and lost control of the sample tray she was holding. The tray came down on her wrist, pinching it against a metal railing. A permanent access platform has been installed for easier access and will be modified to reduce the risk of injury.

Employee was performing preventive maintenance on a haul truck. She then experienced severe pain in the lower left side of her back.

EMPLOYEE OPENED AN INSPECTION DOOR APPROX 24" X 24" IN SIZE, IN ORDER TO SEE WHY THE MACHINE WASN'T OPERATING PEOPERLY. WHILE WORKING ON THE MACHINE, THE UNSECURED DOOR FELL ON HIS RIGHT HAND AND WRIST.

EE WAS BENDING OVER TO TURN ON WATER VALVES & TWISTED HIS BACK.

EE WAS SHOVELING MATERIAL OFF A CONVEYOR BELT WHEN HE FELT SOMETHING "POP" IN HIS SHOULDER, CAUSING PAIN & NUMBNESS IN HIS RIGHT ARM.

WHILE REMOVING A PIECE OF ANGLE IRON, EMPLOYEE PINCHED HIS FINGER BETWEEN ANGLE IRON AND STEEL FRAME.

EE WAS TIGHTENING A CHAIN BINDER TO SECURE A LOAD FOR TRANSIT. THE CHAIN BINDER SLIPPED, HIT THE EE ABOVE HIS RIGHT EYE, CAUSING A LACERATION.

WHILE REMOVING A TOP DECK SCREEN FROM A 6 X 20 SHAKER, THE SCREEN CLOTH DROPPED, PINCHING EE'S FINGER ON THE SECOND DECK DISCHARGE LIP.

EE WAS STRUCK BY A FALLING OBJECT THAT FELL APPROX. 2 FT AND STRUCK HIS R LEG INT HE THIGH AREA. HE WAS HANGING A 9 1/2"X 92 1/2". PIECE OF AR THAT WAS FASTENED WITH 2 BOLTS ON EACH END. WHEN HE ATTEMPTED TO BEND OVER TO PICK UP A NUT, HE LOST GRIP ONT HE LINER AND IT FELL STRIKING HIS LEG.

EE WAS REPAIRING A PIECE OF EQUIPMENT USING GUN CUTTER. A WHILE LATER HE FELT TINGLING IN HIS RIGHT LITTLE FINGER, NOTICING SOME SWELLING & REDNESS. WASHED HIS HANDS & LATER HAD A RED STREAK G OING UP WRIST & TOP OF HAND. HE APPARENTLY HAD A SMALL SCRATCH THAT THE CHEMICAL SEEPED INTO.

WHILE ATTEMPTING TO INSTALL COUNTERWEIGHTS ON SCREEN GEAR DISC, THEY SLIPPED AND LANDED ON LEFT PINKY FINGER. SMASHING LEFT PINKY FINGER AND LOSS OF FINGERNAIL.

WHILE ASSISTING ANOTHER EE TO MOVE A SCREEN, 100-150 LBS HE FELT PAIN ON HIS LEFT SIDE NEAR HIS BELT AREA THAT MOVED DOWN INTO THE GROIN AREA.

LIFTING PUNCH PLATE ONTO THE BACK OF THE CREW CAB TRUCK. SOMETHING CAUSED PAIN/NUMBNESS TO OCCUR IN HIS LEFT ARM/DOWN HAND.

EMPLOYEE WAS BEING ASSISTED BY ANOTHER EE WHILE LOADING 9' LONG CROSSTIES INTO 988F LOADER BUCKET. ONE EE HELPING UNEXPECTEDLY DROPPED HIS END OF CROSSTIE CAUSING EE TO LOOSE HIS GRASP ON HIS END AND THE CROSSTIE DROPPED LANDING ON HIS RIGHT FOOT.

LACERATION TO RIGHT HAND BETWEEN THUMB AREA & FIRST FINGER DUE TO A SHARP OBJECT/AREA ON HANDRAIL/POST ON A 6 X 20' CHUTE.

PULLING A WELDER OVER TO HIS WORK AREA TO REPAIR CRUSHING EQUIPMENT WHEN HE FELT PAIN IN BACK.

EE WAS PICKING UP A VALVE BODY AND TWISTED HIS UPPER BODY AT LEFT SHOULDER BLADE CAUSING SEVERE PAIN.

REBUILDING SCREEN; BEFORE CLOSING MACHINE HE MANUALLY WAS SPINNING SHAFTS WHEN HIS GLOVE BECAME CAUGHT BETWEEN 2 COUNTER WEIGHT, PULLING HIS RIGHT HAND IN. HE HAS A BLOOD BLISTER AND SWELLING ONHIS RIGHT RING FINGER.

WHILE STANDNG ON A 8'LADDER INSTALLING CURVED SHEET METAL AND PANEL. THE PANEL WAS BEING LOWEREDINTO PLACE, LINE UP BARS WERE INSTALLED AND PANEL COULD NOT BE HANDLED BY HIS END, IT SLIPPED CO MING DOWN AND STRUCK HIM ON RIGHT ARM.

PINCHED FINGER BETWEEN SHAKER AND SCREEN CLOTH WHILE CHANGING OUT A PUNCH PLATE.

THE BOOM ON A TRUCK WAS MALFUNCTIONING AND THE EMPLOYEE WAS TRYING TO MOVE THE TIRE MANUALLY. THE TIRE FELL OVER AND CAUSED THE EMPLOYEE TO LOSEHIS BALANCE. HE FELL AND LANDED ON HIS RIGHT WRI ST, FRACTURING IT.

WAS WELDING A BATTERY HOLD DOWN BRACKET THAT WAS HELD IN PLACE BY VISE GRIPS.WHEN EMPLOYEE WENT TO LOOSEN VISE GRIPS,A PIECE OF METAL(THAT ON THE HAND)CUT HIS RIGHT RING FINGER,HE REQUIRED 3 S TITCHES.

EMPLOYEE WAS LIFTING A TIMBER.

EE WAS LOADING OLD CROSS TIES INTO A DUMP TRUCK.HE WS ARRANGING THE CROSS TIES BY HAND, WHEN HISFINGERS GOT CAUGHT BETWEEN TWO CROSS TIES, SMASHING TIP OF RIGHT MIDDLE FINGER. THIS RESULTED IN AMPUTATION OF THE FIRST JOINT OF THE AFFECTED FINGER.

DESCENDING LADDER OF EUCLID WHEN FINGER SLID ACROSS STEEL BURR.

HE WAS LOADING BOXES OF PARTS ONTO S TRUCK WHEN HE FELT MUSCLES PULLING IN HIS ARM SO HE DROPPED THE BOX.

HE WAS CLIMBING DOWN OFF THE SHAKER FRAME WHEN HE CAUGHT HIS LEFT HAND ON A PIECE OF ANGLE OF FRAME. IT TORE OPEN AN EXISTING CUT. SEVEN STTCHES REQUIRED.

MOVING 2" ANGLE IRON WHEN ANOTHER PIECE GOT CAUGHT ON THE ONE HE WAS MOVING.IT FELL STRIKING LEFT FOOT BEHIND STEEL TOE PROTECTOR IN SHOE.

HE WAS CUTTING A PIECE OF SHEET METAL OFF THE SHOOT OF A STONE BIN. WHILE CARRYING IT AWAY THE WEIGHT SHIFTED CAUSING A BIND ON HIS RIGHT KNEE.

HE WAS HELPING TO REPLACE PLATE ON CRUSHER JAW WHEN PLATE SLIPPED AGAINST OTHER PLATE & CUT FINGER.

HE WAS PICKING UP PUMP HOUSING WHEN HE STRAINED LOWER B ACK.

HE WAS CLIMBING UP THE TIRE OF THE TEREX EUCLID TO HELP THE MECHANIC FIND AN AIR LEAK WHEN HE PULLED A MUSCLE.

HE WAS REBUILDING A LIFT CYLINDER OF A EUCLID WHEN THE TWO SHAFTS SLID TOGETHER AND CAUGHT HIS FINGER.

EMPLOYEE WAS REMOVING A BELL HOUSING FROM THE CAT LOADER WHEN HE PICKED UP THE RAILROAD JACK HE WAS USING AND TWISTED HIS BACK.

HE WAS REMOVING GLASS FROM A GARAGE DOOR WINDOW WHEN GLASS FELL FROM UPPER PART OF WINDOW AND CUT HIS LEFT WRIST.