Buscar en el registro

Employee was pressing a sleeve out of crusher with a port a power. After pressing it out, employee began disassembling port a power. During this time the steel cross bar that was holding the port a power fell and struck EE's finger.

Employee was assisting repair in a conveyor belt that broke. While untwisting the belt a rock that was twisted up in the belt came loose and fell, bounced off the beam of the take up pulley and struck the employee.

Employee was unloading a box of welding rods from a truck. The box slipped and while trying to maintain control of the box the employee felt a pull in their shoulder/arm.

Employee(#1) was installing an accumulator on a CAT 980H Loader with the assistance of a Quarry employee (#2). #2 was holding accumulator while #1 was removing bolts. #1 saw #2 struggling with holding up the part and came down to assist. When #1 took hold of part, #2 let go of part and the unexpected transfer of weight caused #1 to strain upper back muscles.

Employee was carrying a container of welding rods and cut fingers on the container.

Employee was dusting off the windshield of a CAT 773 Haul Truck with a rag prior to his shift. While dusting it, his hand swung down and hit the bar below the windshield. (this bar is used for climbing up the truck) This resulted in a dislocated pinky finger on his right hand.

EE WAS DISASSEMBLING THE FMC MF800 VIBRATORY FEEDER. THE EE WAS INT HE PROCESS OF REMOVING THE FASTNERS FOR THE SECOND COUNTERWEIGHT WHEN THE FIRST COUNTERWEIGHT SPUN ON THE SHAFT. THE EE S RI GHT THUMB WAS PINCHED BETWEEN THE TWO COUNTERWEIGHTS.

EMPLOYEE WAS WORKING WITH EMET GUTIERREZ CHANGING A HOIST CABLE ON DB-04C AN 80D NORTHWEST CRANE. THE EMPLOYEE WAS ATTEMPTING TO HOLD THE 1 1/8"CABLE WHILE IT WAS BEING INSTALLED IN THE HOIST DRUM OF THE CRANE. IT CAME FREE STRIKING THE EE IN THE FACE.

EMPLOYEE WAS EXITING THE CAB OF THE FUEL TRUCK FT-03C, WITH AN UNPROTECTED RAZOR BLADE IN HIS RIGHT HAND. AS HE BEGAN TO CLIMB OUT OF THE CAB, HIS RIGHT HAND STRUCK HIS LEFT HAND WITH THE RAZO R BLADE.

EE WAS INSTALLING A PLANETARY DRIVE AXLE IN L-25L A 980C CATERPILLAR WHEEL LOADER. HE WAS USING HIS RIGHT HAND TO PUSH THE AXLE IN WHEN IT MOVED SUDDENLY. THE PALM OF HIS RIGHT HAND WAS PINCHE D BETWEEN THE SUN GEAR AND THE AXLE SNAPRING.

EMP WAS LIFTING ONE END OF A CUTTING EDGE WHICH WEIGHED APPROX 200 LBS. AS HE WAS LIFTING THE ONE END UP HIGH ENOUGH TO SET IT ON A SHORT TABLE,HE EXPERIENCED LOWER BACK PAIN.

EE WAS MOVING A TRANSFORMER FRAMEWORK WHICH WEIGHED APPROX 250 LBS. AS HE WAS REPOSITIONING THE FRAMEWORK, HE LOST HIS FOOTING, AND THE FRAMEWORK, PINCHED HIS RIGHT KNEE BETWEEN IT ANE AND THE FABRICATION TABLE

EE WAS CHANGING A HOIST CABLE ON CR-05L, A NORTHWEST MODEL 6 CRANE. THE EE WAS HOLDING THE CABLE DOWN ON THE HOIST DRUM WITH BOTH HANDS WHILE OTHER EE WAS PULLING ON THE CABLE. THE CABLE SLIPP ED OUT FROM THE HOIST DRUM AND HIT HIM ON THE RT CHEEK.

EE WAS CLIMBING UP THE STEPS TO THE 1 BELT, 2 BELT TRANSFER BOX. HE WAS CARRYING HIS BREAKFAST IN HIS LEFT HAND AND TOOLS WEIGHING 50 & LBS. IN HIS RIGHT HAND. HE PROCEEDED TO STEP UP ON THE F IRST STEP WITHOUT THE USE OF HAND RAILS. WHEN HEDID HE FELT A SHARP PAIN IN HIS LOWER BACK.

VICTIM WAS CHECKING DOOR ALIGNMENT AFTER INSTALLING NEW HINGES AND LATCHES. HE WAS CLOSING DOOR TO CHECK ALIGNMENT WHILE RESTING HIS HAND ON EQUIPMENT TO SUPPORT HIMSELF. DOOR CAUGHT TIP OF 3R D FINGER, 3RD JOINT.

EMPLOYEE CLIMBED ONTO THE ENGINE HOOD OF A CAT 988B LOADER TO REACH A GREASE FITTING ON ANOTHER PIECE OF EQUIPMENT. HE PULLED HIMSELF UP USING HIS LEFT ARM ONLY. IN DOING SO, HE SPRAINED A SHO ULDER MUSCLE. EMPLOYEE WEIGHS ABOUT 400 POUNDS.

MOVING ROCK FROM ROAD SPRAINED BACK ROCK SLIPPED

PREPARING TO SECURE A TRUCK BED, HE LIFTED A WOODEN BLACK WEIGHING 40-50 POUNDS. THEN HE TURNED HIS BODY. A SHARP PAIN WAS FELT. HE SOUGHT MEDICAL HELP ON 1-6-90. CONDITION WAS DIAGNOSED AND T EMPORARY TOTAL DISABILITY BEGAN ON 1-9-90.

EMPL WAS CHANING DRILL BIT APPARENTLY HE OVER EXTENDED WRIST AS HE WAS MOVING BIT.

EMPL OVEREXERTED LUMBAR MUSCLE LIFTING ROCKS FROM CONVEYOR BELT.NOT REPORTED EARLIER BECAUSED IT WAS TREATED AS 1ST AID.

EMPLOYEE REACHED FORWARD TO ASSIST A NEW EMPLOYEE TO LIFT A HEAVY PIECE OF METAL INTO A LOADER BUCKET. NEW EMPLOYEE LET GO WITHOUT A WARNING. THE METAL FORCED EMPLOYEE'S HAND SHARPLY AGAINST I NSIDE SURFACE OF LOADER BUCKET.

EMPLOYEE STEPPED ONTO PLATFORM OF HOPPER TO LOAD HIS TRUCK HE STRUCK HIS KNEE ON A GUARD RAIL.ACCIDENT ORIGINALLY TREATED AS A FIRST AID INCIDENT.CONDITION WORSENED REQUIRING ORTHOSCOPIC SURGE RY ON 09-16-88.MO TIME LOST BEOFRE 09-16-88.

EMP WAS LIFTING OBJECT 5 TO 25 LBS, USING BACK MUSCLES INSTEAD OF LEGS. SOMETIME DURIN THE DAY HE STRAINED A BACK MUSLCE WHICH LATER CAUSED MUSCLE SPASMS

EMPL HELPING TO3REPAIR CRUSHER WHEN HE CUT HAND ON SHARP OBJECT.GLOVES HAD BEEN PROVIDED AND COMPANY POLICY REQUIRES THEIR USE BUT EMPL DIDNT USE THEM.

WHILE CHECKING 2IL IN LOADER EMPLOYEE OPENED COMPARTMENT DOOR AND PULLED HIS SHOULDER CAUSING A TORN LIGAMENT AFTER CONSULTING WITH HIS SUPERVISOR EMPLOYEE DECIDED NOT TO SEEK MEDICAL TREATMNE T AFTER 4 WEEKS3PAIN HAD NOT SUBSIDED SO EMPLOYEE GOT MEDICAL TREATMENT

EMPLOYEE USED A3SOLVENT WITHOUT USING THE RUBBER GLOVES WHICH WERE PROVIDED. A SKIN RASH OCCURRED ON BOTH HANDS REQUIRING MEDICAL ATTENTION.

I,NAME WAS REMO5ING A TOGGLE ROD SEPEARATOR PLATE. CASUAL INSPECTION OF SITUATION FAILED TO DETERMINE THAT TOGGLE ROD AND THE PLATE WERE UNDER TENSION. AS I,NAME REMOVED FINAL V-BELT HOLDING P LATE TO A CABLE3USED TO STABILIZE THE PLATE, THE TOGGLE ROD SHIFTED 1-2 INCHES. ROD STRUCK I,NAME ON SIDE OF HEAD.

I.NAME WAS WORK3NG ON AN ELECTRICAL PROBLEM AND STRUCK HIS LEFT KNEE ON THE SIDE OF THE CATWALK

HE WAS USING A 9OPE TO PULL A BUCKET OF COAL WHEN THE PLANT AND HAD A SHARP PAIN IN HIS LOWER BACK.

EMPLOYEE WAS P6TTING PLATE ON SHAKER SCREEN UNIT THE PLATE FELL CUTTING RT LEG REQUIRED SUTURES

I.NAME MOVING R2CK OFF RAMP AND HURT LOWER BACK.

I.NAME WAS HELP3NG IN THE REPAIR OF A SHOVEL. IN THE PROCESS OF THE REPAIR HE WAS HELPING REPLACE A STEEL PLATE 3' X 4' AND WEIGHT 150 LBS. AND FELT PAIN IN HIS LOWER BACK

GETTING DOWN LADDER OF LOADER & HIT ARM,CHIPPING BONE.

SHOVELING MUD. WENT TO THROW OVER RT. SHOULDER & PULLED MUSCLE.

CLEANING BIN & ROCK FELL & HIT LEFT EYE. SMALL SCRATCH.

GETTING UP ON MACK TRUCK & BUMPED LEFT KNEE. INJURY DID NOT BEGIN TO BOTHER HIM UNTIL 11-06-84 WHEN IT BECAME RED & SWOLLEN. WENT TO DOCTOR ON 11-06-84.

PICKING UP ROCKS AROUND EUCLID WHEN ONE BOUNCED OFF SIDE OF TRUCK AND STRUCK RT LEG AND FELL ON RT FOOT BRUISING AND MAHSING IT

PUTTING IN PUMP AND DIRT BLEW IN RT EYE EYE BECAME INFECTED

PIECE OF SLAG IN LEFT EYE.

PULLING ELECTRICAL WIRE AND HURT RIGHT SHOULDER.

DUMPING CEMENT ON BELT WITH METAL TRASH CAN & SCRAPED R HAND ACROSS TOP & PALM. NEEDED TO BE CLEANED UP & GOT TETANUS SHOT

CARRYING TRANSFORMER AND DROPPED ON RIGHT FOOT BREAKING IT

GETTING DOWN OFF LADDER & BUMPED RIGHT HIP INTO AIR COMPRESSOR.

CARRYING AN 8X8 AND HURT BACK

DOWN IN HOLE & GOT HIT IN HEAD BY FLY DEBRIS. TOP OF FOREHEAD CUT, REQUIRING STITCHES.

CLEANING SHAKER SCREEN AND ROCK FELL OUT OF CHUTE ON TO RIGHT HAND MIDDLE FINGER MASHING AND CUTTING IT

INJURED WAS CLEANING BELT OFF AND STRUCK LEFT SIDE ON HANDRAIL CRACKING 10TH RIB IN LEFT SIDE