Buscar en el registro

While belting the haulage unit and tightening the tail with a set of 1/2 rails, the pin snapped on the hook of the chain causing the tail to move outby quickly, hitting the employee who was extending the jabco pull cord and was hanging it on the last j-hook just outby the tail.

While making a belt splice the employee cut his left thumb with a razor knife requiring 8 stitches

Employee was helping tighten a tensioner on a belt scraper. While using the bar that comes with the scraper, it slipped and flew striking him above his left eye.

While changing a top roller on B-1 #1 belt the bar that was being used to left the belt for clearance slipped and struck the employee on his right elbow.

Employee was holding a wire rope while another employee was to cut the wire rope in two. The hammer glanced off the cutter striking the other man on the right thumb.

While trying to get the cable out from under a sheave wheel of a shuttle car, the EE was hitting a mason hammer with a ball peen hammer. While striking the hammers a piece of metal broke off the mason hammer, embedding in his left thigh.

WHILE HAMMERING ON SPLICER ROD EMPLOYEE MISSED AND HIT 5TH FINGER ON LEFT HAND CUTTING OPEN SAME.

EE WAS REPLACING HEAD JACK ON FLETCHER BOLTER. EE WAS USING A DRILL STEEL AS A PRYBAR. BAR SLIPPED AND EMPLOYEE SMASHED LEFT THUMB.

EE WAS HELPING MECHANIC, MECHANIC WAS USING SLEDGE HAMMER TO REMOVE PINS AND PIN FLEW, STRIKING VICTUM IN FOREHEAD.

LAYED HAND DOWN ON METAL STRAP CUT BACK OF LITTLE FINGER.

EE WAS HELPING TO MAKE A CABLE SPLICE: WHILE SKINNING THE WIRES, UTILITY KNIFE SLIPPED AND CUT HIS RIGHT LEG, ABOVE THE KNEE

EE WAS JACKING UP A LOAD CENTER IN THE ACTIVE WORKING SECTION THE JACK HANDLE SLIPPED OUT OF EE'S HAND HITTING HIM IN THE JAW.

WHILE INSTALLING A SAILBOAT DURING A BEL JOB EMP WAS P0UNDING ON SAILBOAT WITH A SLEDGE HAMMER. A SLIVER OF STEEL FLEW INTO EMPS EYE FROM THE SAILBOAT.

EE WAS TAKING A DRIVE CHAIN APART USING A HAMMER AND PUNCH WHEN A PIECE OF METAL BROKE OFF THE LINK AND LACERATED FOREARM REQUIRING STITCHES.

EE WAS HANGING CANVASS WITH NAILS AND STRUCK A ROOF BOLT PLATE WITH HAMMER DISLODGING A FRAGMENT FROM THE PLATE WHICH STRUCK HIM IN THE RIGHT EYE.

WAS CUTTING BELT WITH A UILITY KNIFE AND PULLED KNIFE INTO HIS THIGH REQUIRING 3 STITCHES.

EMPLOYEE AND HIS CO-WORKER WERE MAKING A SPLICE ON #7 BELT. WHILE POUNDING THE BELT STAPLES IN A PIECE OF METAL BROKE OFF CO-WORKERS HAMMER AND STRUCK THE EMPLOYEE IN THE ARM.

EMPLOYEE WAS HELPING TO REPAIR COAL CHAIN ON MOBILE BRIDGE & WAS PRYING CHAIN OVER WITH PRY BAR. IN DOING SO ANOTHER EMPLOYEE HIT CHAIN WITH HAMMER CAUSING A PIECE OF HAMMER TO CHIP OFF & STRI KE EMPLOYEE IN NECK

INJURED WAS SPLICING BELT ADN USING PULLERS (HAND OPERATED) WHEN HSI BACK BEGAN HURTING. HE CONTINUED WORKING UNTIL 2/15. MISSED THAT NIGHT WORKED 2-16, AND THWN WAS OFF AGIAN.

EMPLOYEE WAS HOLDING ONE END OF A SQUARE DOWN ON A PIECE OF BELT SO THE BELTMAN COULD CUT THE BELT. AS THE BELTMAN REACHED THE END OF THE BELT WITH HIS RAZOR KNIFE IT SLIPPED AND STRUCK THE EM PLOYEE ON THE FINGERS.

EMPL WORKING ON MINER IN SHOP AND WAS POUNDING WATER SPRAY BAR INTO PLACE TO BE WELDED. A SLIVER OF STEEL STRUCK EMPL IN THE RIGHT INDEX FINGER.

HELPING SET TAIL IN 4 SECTION JACKING THE TOOL IN PLACE ANCHOR SLIPPED OFF HIT IN L FOREARM

EMPL HELPING WITH BELT JOB AT 4 EAST SECTION AND WAS TIGHTENING ROPE UP BETWEEN THE TAIL AND LAST SET OF SAILBOATS WHEN CHAIN HOLDING THE TAIL BROKE CAUSING THE TAIL TO SLIDE FORWARD STRIKING THE KNEE.

EMPLOYEE WAS PULLING KNIFE TOWARD BODY WHILE CUTTING BELT.

EMPL WAS PULING ROOF 2' INBY LAST ROW OF BOLTS PIECE OF ROOF FALLING ON 4' ROOF BOLT LYING ON BOTTOM OF MINE FLOOR. BOLT FLEW UP HITTING EMPL ON RIGHT SIDE OF HEAD CAUSING CUT. ING CUT.

EMPLOYEE WAS ATTEMPTING TO CUT WATER HOSE IN HALF WITH TWO MASON HAMMERS IMPROPER USE OF TOOLS