Buscar en el registro

Employee was struck by a pry bar while in the process of cleaning off a grizzly. The employee recieved 10 sutures from the pry bar hitting his safety glasses, which hit his face and eye brow.

CUTTING CHAIN LINK FENCE WITH 24" BOLT CUTTER. WHEN THE WIRE GAVE WAY, THE BOLT CUTTERS STRUCK EE BETWEEN EYES AND CUT THE BRIDGE ON NOSE REQUIRING 6 SUTURES TO CLOSE

BREAKING ROCK WITH 16 POUND DOUBLEJACK. SWUNG AT A ROCK AND FELT PAIN IN GROIN.

WHILE USING A PRYBAR, A ROCK FELL FROM A LOADING CHUTE AND STRUCK EE ON LEFT RING FINGER. EE SUFFERED A FRACTURED FINGER.

WHILE STRIKING A METAL GRINDING BALL WITH A DOUBLEJACK, A PIECE OF METAL FLEW OFF OF THE BALL STRIKING EE IN LEFT ARM. METAL PENETRATED MUSCLE. INCIDENT BECAME LOST TIME ON 8-18-03 WHEN HE MIS SED WORK DUE TO SURGICAL REMOVAL OF METAL.

EMPLOYEE WAS USING A BAR TO PRY A ROCK WHEN ANOTHER ROCK STRUCK THE BAR CAUSING THE BAR TO PINCH EMPLOYEE FINGERS BETWEEN BAR AND STEEL BEAM.

EE SWINGING 16 POUND DOUBLEJACK. FINGER PINCHED BETWEEN HANDLE OF DOUBLEJACK AND OBJECT HE WAS STRIKING AT.

EMPLOYEE WAS BREAKING ROCK WITH A DOUBLE JACK AND A PIECE OF FLYROCK STRUCK HIS UPPER LIP WHICH REQUIRED SUTURES TO CLOSE.

A MAINTENANCE MECHANIC REPORTED ON 8-30-02 THAT WHILE ON SWING SHIFT HE HAD BEEN FREEING A POSITIVE DISPLACEMENT PUMP BY USING A 48" PIPE WRENCH, THE EE STATED THAT HE HAD NOT NOTICED ANY BACK PAIN DURING SHIFT, HOWEVER THE FOLLOWING MORNING HE COMPLAINED OF LOWER BACK PAIN. THE EE WAS SEEN BY A PHYUSICIAN AND RELEASED, HE LATTER RECEIVED MEDICAL TREATMENT ON 10-2-02 BUT CONTINUED

WHILE USING A PRYBAR TO MOVE ROCK, ANOTHER ROCK STRUCK BAR CAUSING IT TO STRIKE EE ON RIGHT CHEEK EE DID NOT SEEK MEDICAL ATTENTION UNTIL 4-4-02 WHEN IT WAS DISCOVERED HE HAVE A FRACTURED JAW.

WHILE USING A PRYBAR TO MOVE A ROCK, ANOTHER ROCK STRUCK BAR CAUSING IT TO STRIKE EE ON RIGHT CHEEK & NOSE. EE SUSTAINED CONTUSION & SMALL LACERATION. ON 3/28/02 A CT SCAN REVEALED FRACTURE TO RIGHT SINUS AREA.

WHILE BREAKING A ROCK AT GRIZZLY IN LINE 9, EE WAS USING 20# DOUBLE JACK, A PIECE OF FLY ROCK STRUCK EE ON CHIN. EE TREATED AT HOSPITAL, 5 SUTURES.

WHILE ATTEMPTING TO BREAK A JOINT ON A 9 7/8 CASING WITH A 60" WRENCH, WRENCH SLIPPED PINCHING LEFT MIDDLE FINGER BETWEEN WRENCH AND DRILL MAST. RESULT WAS FRACTURED FINGER.

WHILE BREAKING ROCK WITH A 20LB. SLEDGE HAMMER A FRAGMENT OF ROCK STRUCK R. FOREARM CAUSING A 1" LACERATION WHICH REQUIRED SUTURES.

BREAKING ROCK WITH SLEDGE HAMMER. A PIECE OF ROCK FLEW UP STRIKING SAFETY GLASSES. FRAME OF SAFETY GLASSES CUT EE JUST ABOVE RIGHT EYE.

EE CLAIMS THAT WHILE ASSISTING IN ALIGNING CUTTING EDGE UNTO MOTOR GRADER BLADE, THE EDGE TIPPED UNTO ITS SIDE COMING DOWN ON PRYBAR HE WOULD USING TO ALIGN AND PINCHED HIS FINGER BETWEEN THE BAR AND THE FLOOR.

EE CLAIMS THAT WHILE PRYING ON A ROCK OUT OF GRIZZLY WINDOW, TIP OF PRYBAR BROKE CAUSING HIM TO FALL AGAINST THE CONCRETE WALL ON HIS LEFT SHOULDER. HE CONTINUED TO WORK UNTIL 3-8-01 WHEN HE R EQUESTED TO GO SEE A DOCTOR. DOCTOR REFERRED HIMTO GET AN MRI WHICH REVEALED ROTATOR CUFF DAMAGE.

EMPLOYEE STATED WHILE HE WAS LOWERING A PUMP ANDPIPE INTO A SUMP WITH A COME-A-LONG, THE COME-A-LONG SLIPPED AND THE PIPE STRUCK THE EMPLOYEE ON HIS RIGHT FOREHEAD. THIS RESULTED IN A LACERA TION REQUIRING STITCHES.

EMPLOYEE AND WITNESS STATED THAT WHILE REMOVING A BEARING OFF A PUMP SHAFT BY USING A HAMMER AND PUNCH, EMPLOYEE FELT SOMETHING FLEW AND STRUCK HIM ON THE LEFT ARM. WITNESS ADMINSTERED FIRST A ID. EMPLOYEE REFUSED TO REPORT INCIDENT TO SUPERVISOR ACCORDING TO WITNESS. REQUESTED REMOVAL OF SPLINTER ON 6-22-99. ON 7-9-99 DR REMOVED SLIVER COMMENCED LOST TIME.

EMPLOYEE CLAIMS WHILE PRYING HOOD ON #576 LOADER WITH A PRY BAR, AS HE WAS PRYING, BAR SLIPPED AND STRUCK HIM ON HIS RIGHT THUMB.

EMPLOYEE CLAIMS WHILE HE WAS IN THE PROCESS OF UNPLUGGING THE #2 HOPPER BELOW THE FILTER WHEELS USING A PRYBAR, BAR CAME IN CONTACT WITH THE LIPON THE HOPPER CAUSING THE INCISION ON RIGHT HAND .

BOLT SECURING TORQUE ARM ON BUCKET ELEVATOR DRIVE UNIT WAS PULLE DBEFORE THE UNIT WAS SECURED WITH A CRANE. UNIT ROTATED AROUND DRIVE SHAFT AND STRUCK EMPLOYEE ON LEFT SHOULDER.

EE SUSTAINED A 1/2 LACERATION ON HIS UPPER LIO, WHILE INSTALLING A RING ON A PRODUCT BARREL. EE STATED THAT THE RACHET WRENCH SLIPPED OFF THE NUT AND STRUCK HIM ON THE MOUTH.

EMPLOYEE CLAIMS HE CUT HIS LEFT HAND, BETWEEN THE THUMB AND FORE FINGER, WHILE CUTTING THE ZIP TIE OF A FEED STOCK CONTAINER WITH A UTILITY KNIFE.

INJURED WAS WORKING ON LINERS ON #2 PIOCHE FEEDER AT MILL. THE HOOK THAT WAS BEING USED TO GRAB ONTO THE PORTION OF THE LINER, BROKE OFF CAUSING A PEICE OF STEEL APPROX 1/4"X2"X10" TO BREAK O N ONE END. FIXING OFF AND STRIKING INJURED ON LOWER CHIN.

EE WAS DRAWING 3" STEEL BALLS WHEN A STEEL CHIP FLEW OFF STRIKING HIM IN FRONT OF NECK AREA.

WHILE EXCAVATING GOT SOME TYPE OF ACID DUST ON LEGS BELOW KNEES, CAUSED RASH.

WHILE USING PRY BAR BREAKING BOULDER.THE BAR SLIPPED CATCHING INDEX FINGER BETWEEN STEEL SET AND PRY BAR.

WHILE REPLACING INSTR SPOOL PC AND INSTALLING COUPLING ON STEEL PIPELINE STRUCK BY 14' 15' L PC OF STEEL PIPELINE

WHILE REMOVING A WING NUT FROM AN AIR HOSE, HE SWUNG THE RAP WRENCH AT WING NUT; MISSED IT AND FELT PAIN UPPER BACK.

WHILE INSTALLING TAILING PIPE,TIGHTENING A DRESSER COUPLING,PIPE SLIPPED OFF OF BLOCK WHERE IT HAD BEEN SETTING,STRIKING INJURED ON RIGHT HAND.

EMPLOYEE WAS TIGHTENING A 1 1/2" UNION WITH A 14" PIPE WRENCH FROM THE THIRD STEP OF A 6' STEP LADDER. THE WRENCH SLIPPED OFF THE UNION CAUSING THE EMPLOYEE TO LOSE HIS BALANCE AND FALL TO THE CONCRETE FLOOR.

EMPLOYEE HAS PROGRESSIVELY NOTICED INCREASING PAIN,STIFFNESS AND SWELLING IN JOINTS OF THUMB INDEX AND MIDDLE FINGER OF RIGHT HAND(EMPLOYEE NOTIFIED ON 08-15-91).

WHILE EMPLOYEE WAS INSTALLING BOLTS ON FISH PLATES FOR TRACK U/G HE BENT OVER AND WHEN HE STOOD UP FELT PAIN TO LOWER BACK.

WHILE HELPING LABORER FREE CHUTE DOOR TRACK JACK STRUCK EMPL ON HAND WHEN PRESSURE WAS REALEASED.

WHILE BREAKING BOULDERS UNDERGROUND WITH SLEDGE AHMMER HE FELT PAINN TO LOWER BACK AS HE TOOK A SIDE-WAYS SWING ON HAMMER.

WHILE EMPL WAS CLEANING GRATES AT #1 BM WITH HAMMER & PUNCH STEEL CHIP FLEW & STRUCK EMPL ON LEFT FOREARM STEEL CHIP WAS IMBEDDED & HAD TO BE REMOVED ON 9/24.

EMPL WAS PULLING ON WRENCH & TWISTED BACK. INCIDENT OCCURRED IN MINE MAINTENANCE SHOP.

EE WAS PRYING ON A ROCK ON THE GRIZZLY, WHEN ANOTHER ROCK CAME OUT OF THE WINDOW STRIKING FIRST ROCK CAUSING IT TO KNOCK THE PRY BAR AWAY FROM HIM.

CONNECTING 2 1/2" FIRE HOSE TOGETHER,SPANNER WRENCH BROKE CAUSING RIGHT HAND TO SLIP OVER BROKEN,JAGGED EDGE CAUSING LACERATION TO HAND.

WHILE BREAKING A LARGE ROCK ON PICKING BELT, (WITH DOUBLE JACK) A BASEBALL SIZE PIECE OF ROCK BROKE OFF, STRIKING EMPLOYEE ON KNEE (LEFT).

WHILE TOURING CHECKING THE OPERATION HE STOPPED TO HELP MUCKER IN PRYING LOOSE A BOULDER WITH PRY BAR. PRY BAR SLIPPED CAUSING HIS LEFT RING FINGER TO CATCH BETWEEN PRY BAR AND CONCRETE WALL.

EMPLLOYEE WAS TRYING TO DISLODGE A LARGE ROCK WEDGED UP IN THE DRAW RAISE WINDOW, WHEN THE ROCK CAME LOOSE, FALLING FASTER THAN ANTICIPATED, TAKING I.NAME'S PRY BAR AND HIS (R) HAND; CAUSING H IM TO STRIKE ANOTHER ROCK WHICH WAS SETTING ON THE GRIZZLY.

EMPLOYEE STRUCK HIS RT 2ND FINGER BETWEEN RIM EDGE AND RUBBER MALLET HANDLE WHILE REMOVING A TIRE FROM THE RIM. EMPLOYEE STATED THAT HE WAS HITTING THE BEAD WITH THE MALLET AND THE MALLET GLAN CED OFF AND HIT HIS FINGER BETWEEN THE BEAD AND HAMMER HANDLE.

HITTING FORK LIFT FORK WITH HAMMER FORK WAS PART OFF TOP SLIDE HANGING UP ON BOTTOM HIT IT HARDER FORK BROKE LOOSE FELL ON FLOOR BOUNCED UP STRUCK EMP ON INSTEP..

EMPLOYEE WAS PULLING ON A TORQUE REDUCER TO LOOSEN BOLTS ON THE AXLE OF A 570 LOADER.HE PUT HIS FFET ON THE SIDE OF THE FRAME AND PULLED ON THE FLEX HANDLE.IT SPRUNG BACK AND EMPLOYEE STRAINED HIS ABCK.

REMOVING CAMBELT CUTTING BELT WITH KNIFE WHEN LOCKING DOG SLIPPED PINNING HIS RT HAND BETWEEN TAKE UP PULLEY AND FRAME

I,NAME WAS REMO5ING A BEARING RACE ON THE PRIMARY FEEDER ECCENTRIC. I,NAME STRUCK THE RACE WITH A HAMMER TO FREE IT, AND A PIECE OF METAL BROKE FREE AND FLEW INTO HIS LEFT FOREARM.

EMPL REMOVING H5NDLE ADAPTOR ON JACKLEG BY HITTING IT WITH HAMMER WHEN PIECE OF METAL BROKE OFF ADAPTOR PUNCTURING EMPL RIGHT FOREARM.

EMPLOYEE CLAIMS3HE WAS REMOVING ROCKS FROM GRIZZLY RAISE TOP AT PANEL 26-5,GRIZZLY LEVEL,WHEN A ROCK FROM FINGER TURNED LOOSE,HITTING THE SCALING BAR.HE THEN FELT PAIN ON HIS BACK.