Buscar en el registro

EMPLOYEE WAS REMOVING TOOTH TIPS FROM DRAGLINE BUCKET WITH A HAMMER.EMPLOYEE STRUCK TIP WITH AHMMER AND A SLIVER OF METAL FROM THE TIP STRUCK THE EMPLOYEE ON INSIDE OF RIGHT KNEE.THE METAL FOR EIGN BODY WAS REMOVED AND LACERATION SUTURED BY COMPANY DOCTOR.

EMPLOYEE WAS REPLACING TIPS ON DRAGLINE BUCKET. EMPLOYEE WAS REMOVING A TIP WITH A SLEDGE HAMMER & A SILVER OF METAL HIT EMPLOYEE ON RIGHT THIGH. SILVER OF METAL WAS REMOVED BY COMPANY DOCTOR, AND LACERATION WAS STICKED UP.

EMPLOYEE WAS ADJUSTING BRAKE BAND ON DRAGLINE (MAINTOWOC 4600) EMPLOYEE MASHED TIP OF HIS MIDDLE FINGER ON HIS LEFT HAND THE INJURY REQUIRED 5 STICHES

ALLEGEDLY INJURED WAS OPENING SAND DOOR IN MAIN TUNNEL, PRYBAR SLIPPED, HE FELL AND STRUCK HIS LEFT SIDE ON STEP.

WHILE TIGHTENING THE DRAG FRICTION ADJUSTMENT NUT ON THE 7400 MARION DRAGLINE, THE WRENCH SLIPPED AND THE EMPLOYEE HIT HIS LEFT ARM ABOVE THE ELBOW ON A SHARP PIECE OF METAL LAGGING.

INJURED WAS USING SLEDGE TO STRIKE A PIPE WHICH HE WAS HOLDING IN HIS LEFT AHND.HE MISSED THE PIPE AND STRUCK HIS LEFT FIRST FINGER.

INJURED WAS STRICKING CHUTE WITH SLEDGE HAMMER, WHEN RIGHT MIDDLE FINGER WAS CAUGHT BETWEEN HANDLE AND CHUTE FRAME.

INJURED WAS CLEANING DIRT OFF COUNTER WEIGHT PULLEY WHEN FINGER WAS CAUGHT BETWEEN BAR & GUARD FRAME.

INJURED WAS MOVING ROLLAWAY CHUTE USING PIPE AS PRY BAR. PIPE SLIPPED & S TRUCK RIGHT KNEE.

INTINAL INJURY WAS ON 6-29-88. SMALL PIECE OF METAL STRUCK LEFT HAND.

INJURED WAS REMOVING SIMPLICITY BEARING WITH HAMMER AND CHISEL, WHEN SMALL PICEC OF METAL STRUCK LEFT HAND.

INJURED WAS HELPING TO PULL TOGETHER FEEDER PADS WITH COME A LONG WHEN A WELDED EYE BROKE OFF FEEDER PAD AND STRUCK HIS LEG AND WRIST.

INJURY OCCURRED ON 3-14-88 WHEN A BELT CLAMP SLIPPED AND STRUCK INJUREDS RT KNEE THERE WAS NO LOST TIME APPROX 2 MONTHS LATER INJURED HAD SURGERY ON HIS RT KNEE TO RELIEVE PAIN LOST TIME STAR TED 5-24-88 ON 6-15-88 AND 9-21-88 INJURED HAD FURTHER SURGERIES TO REPAIR SURGERY DONE ON 4-21-87 THE SURGERY DONE ON 4-21-87HAD BEEN FOR AN INJURY TO HIS RT KNEE ON 9-23-86

WHILE INSTALLING TRACKS ON LOADER INJURED WAS SWINGING SLEDGEHAMMER AND FELT PAIN IN L LOWER BACK THIS FORM BEING SUBMITTED AS RESULT OF PART 50 AUDIT PRESCRIPTION DRUGS WERE ISSUED

INJURED WAS SHO5ELING UNDER HAMMERMILL; WHEN JUNCTION BOX COVER FELL AND STRUCK HIM ON LEFT SHOULDER.

INJURED WAS DRI5ING PIN IN FEEDER PAD WITH BAR LATER HE FELT BACK PAIN

INJURED WAS ATT9MPTING TO MOVE ROLLAWAY CHUTE WITH PIPE.PIPE SLIPPED AND CAUGHT FINGER BETWEEN CHUTE AND SPRING MOUNT.

EMPLOYEE WAS HO5DING A SOCKET ON A BOLT THAT WAS TO BE REMOVED FROM A DOZER. ANOTHER EMPLOYEE WAS PULLING DOWNWARD ON THE CHEATER PIPE AND BREAKER BAR.THE SOCKET SLIPPED OFF THE BOLT HEAD AND THE INJURED'S 5EFT THUMB WAS CAUGHT BETWEEN THE BREAKER BAR AND A STEEL BRACE ON THE DOZER. LEFT THUMB WAS INJURED.

INJURED HURT HI8 BACK WHILE SWINGING SLEDGEHAMMER

INJURED WAS REP5ACING HOSE ON AUTOMATIC HOSE REEL BY HOLDING REEL WITHA WRENCH. THE WRENCH SLIPPED AND HIT RIGHT THUMB WAS CAUGHT BETWEEN REEL AND HOSE.

EMPLOYEE WAS CU7TING UP CHICKEN AND CUT HIS RIGHT INDEX FINGER

INJURED WAS REM2VING WELDED PRY EAR OFF HAUL TRUCK BED WITH SLEDGE HAMMER, WHEN PRY EAR FLEW UP AND STRUCK RIGHT THUMB

INJURED WAS REMOVING A LARGE ROCK FROM AGGREGATE FEED GATE OVER PRIMARY TUNNEL CONVEYOR WITH A PRYBAR WHEN THE ROCK WAS DISLODGED IT FELL AND STRUCK THE PRYBAR THE PRYBAR FLEW UPWARDS PINCHIN G INJUREDS FINGERS BETWEEN BAR AND FRAME OF GATE AFTER BAR HIT GATE FRAME IT THEN GLANCED AND STRUCK EMPLOYEES RT EAR

INJ WAS HELPING REMOVE CLAMP BARS FROM CONVEYOR BELT AFTER SPLICING IT WHEN CLAMP BAR CAME APART FINGER WAS CAUGHT BETWEEN CLAMP BAR CUTTING FINGER

WHILE ADJUSTING A BELT WITH A PIPE WRENCH, HE WAS TAKING UP ON A PULLEY AND HURT HIS LOWER BACK.

INJURED SUSTAINED A MUSCLE PULL WHILE OPERATING A COME-A-LONG

EMPLOYEE WAS ADJUSTING THE HOIST CONTROL BAND. THE WRENCH HE WAS USING SLIPPED CAUSING HIS FINGERS TO BE PINCHED BETWEEN THE BULL GEAR SPOKES AND THE ADJUSTING SCREW.

WHILE TAKING A SHAFT OUTOF THE DRAGLINE TOO MUCH PRESSURE BUILT ON THE JACK AND THE PRESSURE KNOCKED THE BLOCKING OUT FROM UNDER THE JACK AND THE BLOCKING FLEW UP AND HIT THE EMPLOYEE IN THE F ACE ACROSS THE NOSE CAUSING CLOSE HEAD INJURIES.

WHILE TAKING A SHAFT OUT OF THE DRAGLINE THE JACK SLIPPED AND HIT EMPLOYEE IN THE LEFT EYE

THE EMPLOYEE WAS WORKING ON THE CRUSHER AT THE PLANT WHEN THE BAR HE WAS USING SLIPPED AND HIT HIM OVER THE RIGHT EYE

INJURED WAS HELPING REMOVE V-14 SCREEN FROM DEPT 84 FOR INSTALLATION IN DEPT 51. FELLOW WORKER WAS CUTTING BOLTS HOLDING THE BACK PLATE ONT HE SCREEN WHILE INJURED WAS KNOCKING THE CUT BOLTS OUT WITH A CHIPPING HAMMER. AS THE LAST BOLT WAS CUT THE PLATE FELL AWAY FROM BOTH EES BUT THE CHIPPING HAMMER WAS IN SOME WAY DEFLECTED SO AS TO CAUSE INJUREDS FINGER TO BE CAUGHT BETWEEN

INJURED WAS REMOVING A BOLT FROM THE BELT CLAMP BAR ON PRIMARY TRANSFER CONVEYOR BELT WHEN THE CLAMP BAR POPPED LOOSE IT SENT THE WRENCH UP INTO HIS MOUTH

INJURED WAS HAMMERING A PIN AND WEDGE IN THE BASE CHUTE DOOR, WHEN HE STRUCK HIS LEFT THUMB WITH A HAMMER.

INJURED WAS SHOVELING BESIDE THEMAIN CRUSHER, WHEN HIS HAND STRUCK A PIECE OF METAL WEDGED ABOVE THE TAIL PULLEY ON THE SIDE OF THE CRUSHER.

INJURED WAS DRIVING RUBBER ONTO DRIVE PULLEY WITH SLEDGE HAMMER WHEN HAMMER GLANCED OFF & STRUCK LEFT HAND BETWEEN METAL PLATE & HAMMER.

DRIVING WEDGE AT FIELD HOPPER,HIT LEFT THUMB AT SECOND JOINT WITH HAMMER.

WHILE INJURED WAS CLEANING OFF LARGE WIRES IN AN ELECTRICAL BOX HIS KNIFE SLIPPED AND CUT HIS LEFT PALM

RONNIE WAS ON DRAGLINE - USING WRENCH TO LOOSEN NUT - WHILE PULLING UP HE PULLED MUSCLE IN BACK

INJURED WAS WORKING ON THE 90FT STACKER WHEN THE KNIFE HE WAS USING TO SPLICE THE CONVEYOR BELT SLIPPED AND CUT HIS RIGHT UPPER LEG

SWINGING 12LB SLEDGE HAMMER TO STRIKE FEEDER PAD -MISSED AND STRUCK TOP OF LEFT FOOT BEHIND STEEL TOE.