Buscar en el registro

Cut on left pointer finger.

EE was cutting zip tie off end of "down the hole" measuring tape. Cutting away from themself. When the zip tie was cut the knife became uncontrolled and cut another EE. The cut was in EE's hand. The cut required 6 stitches.

Employee was using a utility knife to cut skirtboard rubber and the knife slipped and cut employee's left thigh.

Employee was hitting a striking wrench with a 2 pound sledge hammer and inadvertently hit left hand thumb.

Employee was using a razor knife to cut skirt rubber when he accidentally cut his left wrist.

Ee was using sledge hammer on plate to press large bushing into loader (equipment) link. A small piece of metal came off of plate and punctured Ee's left forearm.

Employee was using sledge hammer to remove pins from cylinders on a cone crusher. Employee stated right hand was hurting yesterday evening after he left work. Employee reported the injury on 4/15/09 at beginning of shift.

Bolt was being knocked from pin on EC 240 LR Excavator. A punch was struck by another employee to remove pin when the working end of punch broke off and hit employee in the neck.

He was tubing holes so that they would not fill up with water if it rained and was cutting them to fit holes and he accidently cut his leg.

Employee was swinging a sledge hammer when his left hand small finger came in contact with a channel brace which resulted in the employee having to have three stitches and his nail removed.

The injured miner was attempting to remove a bearing cap bolt while performing maintenance on a jaw crusher with a sledge hammer and another hammer used for driving out pins. As he struck the pin-driving hammer with the sledge hammer trying to drive out the cap bolt, a small piece of the pin-driving hammer broke off an became embedded into the calf muscle on his left leg.

EMPLOYEE STATES THAT HE WAS LOOSENING A ONE INCHBOLT FROMA ROCK FEEDER AND WHILE APPLYING TORQUEON A WRENCH HE STRAINED HIS BACK MUSCLE.

EMPLOYEE WAS BENDING OVER HITTING A STOP WRENCH WITH A HAMMER WHEN HE FELT HIS BACK PULL.

WHILE ASSEMBLING A TRACK ADJUSTER ASSEMBLY, EMPLOYEE WAS TAPPING THE IDLER YOKE WITH A HAND HELD SLEDGE HAMMER. AS THE PART STARTED TO GO TOGETHER, THE ASSEMBLY STARTED TO LEAN FORWARD. EMPLOY EE WAS SWINGING HAMMER WITH LEFT HAND AND STRUCKRIGHT HAND THAT WAS HOLDING THE YOKE FROM MOVING FURTHER TOWARDS THE EMPLOYEE.

EE WAS REMOVING BOLTS ON A LOADER AND PULLED MUSCLE IN BACK.

EMPLOYEE CUT LEFT HAND BETWEEN THUMB AND INDEX FINGER WHILE HE WAS USING PINCH BARS TO HOLD A BELT WHICH HE WAS SPLICING.

WHILE WORKING ON DIFFERENTIAL FOR HAUL TRUCK, A CHIP BROKE OFF A CHISEL AND PUNCTURED EMPLOYEE'SLEFT HAND.

EMPLOYEE WAS WORKING ON 51/2FT CRUSHER & WAS PULLING ON WRENCHES & SWING HAMMER WHEN HE HURT HIS LEFT SHOULDER

INJURED OCCURRED WHEN EMPLOYEE ATTEMPTED TO UNSCREW HEAD FROM DRYRITE PUMP. AIRLINE TO PUMP HEAD WAS UNDER 125 PSI BECAUSE OF PLUGGED LINE. WHEN PUMP HEAD DECOUPLED, AIR LINE STRUCK EMPLOYE ON ELG AND HEAD.

54736YEE WAS LETTING TOP/PLATE DOOR DOWN. HE WENT TO TAKE THE COME-A-LONG HOOK OFF THE DOOR. T HE DOOR WAS NOT CLOSED COMPELTELY. THE DOOR FELL AND CUAGHT HIS FINGER BETWEENT HE COME-A-LONG 15403HE DOOR.

PULLING STEEL UP USING NYLON LOWER BACK PAIN

PUSHING ON A PIPE WRENCH,EMPL SLIPPED & FELL INJURING LEFT SIDE RIBS.

TIGHTENING NUT WITH HAMMER AND WRENCH. PINCHED FINGER ON GUARD AND WRENCH

REMOVING DAMAGED CUTTING EDGE ROCK CAUGHT IN BROKEN EDGE CAUSING EXTREME PRESSURE ON EDGE WHEN BOLT WAS REMOVED EDGE FELL OUTWARD HITTING I NAME ON TOP OF FOOT (LEFT)

OPENING GATE WITH PRY BAR BAR SLIPPED INJ RING FINGER ON RIGHT HAND & LITTLE FINGER ON RIGHT HAND.

SMASHED RIGHT MIDDLE FINGER WITH HAMMER WHILE INSTALLING PVC PIPE.FOUND OUT ABOUT FINGER BROKEN 04-05-91.AT THE TIME OF ACCIDENT HE DID NOT FEEL IT NECESSARY TO GO TO THE DOCTOR OR HOSPITAL TO GET IT CHECKED OUT.

WHILE PULLING ON A WRENCH TO REMOVE BOLTS FROM MOTOR MOUNT EE FELT MUSCLE STRAIN.

EMPL FREEING PLUG-UP IN PRIMARY CRUSHER WHEN HE STRUCK RIGHT HAND ON STEEL BOX.

WHILE SEATING A BEARING WITH A PUNCH AND HAMMER THE PUNCH CHIPPED PUNCTURING HIS LEFT FOREARM.

EMPLOYEE WAS TRYING TO DISLODGE ROCK IN CRUSHER WITH STEEL WEDGE. EMPLOYEE SAID HIS BACK HURT. HE CONTINUED TO WORK ON 6-19-90 AND FULL SHIFT ON 6-20-90. DID NOT WORK ON 6-21-90 OR 6-22-90. CH OSE NOT TO SEEK ANY MEDICAL CARE.

I NAME WAS TAPPING A MACHINE GEAR WITH A HAMMER WHEN A PIECE OF STEEL FLEW INTO HIS RT EYE NEITHER HE OR THE FOREMAN KNEW ABOUT IT UNTIL THE NEXT DAY WHEN HE WAS HAVING PAIN & CLOUDINESS OF TH E EYE PIECE OF STEEL CAUSED A CUT TO THE CORNEA OF THE EYE

I NAME WAS MAKING A SPLICE REPAIR ON CONVEYOR #2 WHEN THE CHAIN LEVER HOIST BEING BACKED OFF ON ANOTHER SECTION OF THE BELT SLIPPED PULLING THE BELT OUT FROM UNDER HIM AFTER MOVING HIM ABOUT 1 5' DOWN THE CONVEYOR RESULTING IN A BRUISED BACK

THE INJURED WAS SITTING ON CONVEYOR #2 BACKING OFF A CHAIN LEVER HOIST WHEN THE HOIST DID NOT HOLD.THE CHAIN HOIST FREE WHEELED LETTING THE BELT COME DOWN AT A FAST RATE WITH HIM ON IT.HIS RIG HT LEG WAS PULLED UNDER A SKIRT BOARD AND DISLOCATED.

THE EMPLOYEE WAS CLEANING MUD FROM THE ROCK FEEDER WITH A PICK AXE WHEN HIS HAND CAME INTO CONTACT WITHA PICE OF STEEL METAL WHICH RESULTED IN A CUT MIDDLE FINGER OF THE RIGHT HAND.TWO STITCHE S.

THE EMPLOYEE WAS LOOSENING BOLTS ON THE CRUSHER WHEN HIS RIGHT HAND SLIPPED OFF THE WRENCH AND HIT A BOLT RESULTING IN INJURY TO HIS RIGHT THIRD FINGER.

WHILE TENSIONING THE DRIVE BELTS ON THE STANDARD CRUSHER, WITH A PORTA-POWER, THE PORTA POWER SLIPPED OFF THE PUSH POINT AND STRUCK HIM IN THE MOUTH CHIPPING HIS LEFT FRONT TOOTH.

THE EMPLOYEE WAS SWINGING A SLEDGE HAMMER DRIVING WEDGES IN A 4 1/2 SHORTHEAD CRUSHER WHEN HE TWISTED HIS LEFT KNEE.

WHILE REMOVING BUCKET PINS ON 550 POUNDING HAMMER SMALL PIECE OF METAL FLEW OFF OF HAMER P HIT EMPL THIGH ON LEFT LEG.

EMPLOYEE WAS MOVING MOTOR MOUNT BOLTS WITH HAND WRENCH AND STRAINED TOO MUCH RESULTING IN PULLED MUSCLE TO GROIN AREA.

EMPLOYEE ALLEGES THAT HE WAS INJURED WHILE LOOSENING PIPE CAPS ON WASH TOWER SPRAY BARS WITH A PIPE WRENCH WHICH RESULTED IN A PULLED MUSCLE IN THE UPPER BACK AND NECK AREA INCLUDING A POSSIB LE PINCHED NERVE.

EMPLOYEE WAS USING A PICK AXE CLEANING A CHUTE AND WAS HANDLING SCREENS AT THE SCREEN TOWER WHEN HE SUSTAINED INJURY TO THE MUSCLES IN THE MIDDLE OF HIS BACK.

EMPLOYEE WAS INSTALLING NEW TOOTH ON HI-LIFT BUCKET WHILE STRIKING TOOTH WITH SLEDGEHAMMER STEEL PARTICLE FROM TOOTH BROKE OFF AND PENETRATED RIGHT THIGH.

EMPLOYEE WAS CUTTING A PIECE OF RUBBER WHEN RAZOR KNIFE SLIPPED CUTTING TOP OF LEFT HAND.

MAN WAS DRILLIN1 JUST READY TO PULL HAMMER OUT OF THE HOLE, WHEN THE CHAIN BROKE OFF AND CAME DOWN AND HIT HIM.

WAS USING HANDL9 OF 3 LB HAMMER TO DRIVE SKIRTING DOWN MISSED THE SKIRTING AND HIT 3 RD FINGER ON RIGHT HAND.

EMPLOYEE WAS UN1LUGGING WITH STEEL BAR WHEN IT HIT HIM IN THE NECK AND JAW.CUT ON NECK AND JAW.NO EVIDENCE OF DISCOLORATION OR DAMAGE PER X-RAYS.

WHILE CLEANING 7HUTE OF 5 CONVEYOR WITH A BAR, BAR SLIPPED INTO 5 HEAD PULLY AND CAUGHT EMPLOYEES RIGHT HAND BETWEEN THE COVER AND BAR.

EMPLOYEE WAS RE4OVING DIRT AND ROCK BETWEEN DOZER TRACKS.SHOVEL HIT ROCK AND EMPLOYEE FELT A POP IN HIS LOWER BACK.