Buscar en el registro

EE WAS CUTITNG A PIECE OF GUM RUBBER WITH UTILITY KNIFE, WHEN EE CAME TOT HE END OF THE RUBBER THE KNIFE SLIPPED AND CUT HIM ON THE LOWER RIGHT THIGH AREA. THE LACERATION REQUIRED 3 STITCHES.

EE WAS CLEARING A HOPPER WITH A 2" BAR WHEN THE BAR SLIPPED AND MASHED HIS LEFT PINKY FINGER BETWEEN THE BAR AND THE HOPPER. RESULTED IN 2 STITCHES.

EMPLOYEE WAS ATTEMPTING TO OPEN AN ACTUATOR VALVE WHEN HSI WRENCH SLIPPED CAUSING HIS RIGHT HAND TO GET PINCHED BETWEEN THE VALVE AND A STANDING PIPE. THIS RESULTING IN 4 STITCHES TO THE PALM ON RIGHT HAND.

EE WAS DIGGING LUMPS OUT OF A SILO. A LUMP SHIFTED AND FELL ON HIS LEFT LITTLE FINGER. THE EE WAS RESTING HIS LEFT HAND BELOW THE SILO OPENING.

THE EE WAS TRIMMING OUT A HOLE IN A WOODEN CABINET DOOR WITH HIS POCKET KNIFE. WHEN THE DOOR MOVED UNEXPEDTDLY HE CUT HIS LEFT INDEX FINGER WITH THE KNIFE. THE LACERATION REQUIRED SUTURES TO C LOSE.

EE WAS SUPERVISING THE OPERATION OF CLEANING MATERIAL FROM A PUG MACHINE. CO-WORKER WAS USING A SCRAPER (LONG HANDLE) TO CLEAN MATERIAL OFF THE PUG FACE WHEN THE SCRAPER GLANCED OFF THE PUG AN D HIT EE ABOVE THE RIGHT EYE CAUSING A 1 INCH LONG LACERATION REQUIRING 3 STITCHES.

EMPLOYEE WAS OPENING THE BOTTOM DOORS ON RAILCAR (WITH A BAR) WHEN HE FELT PAIN IN HIS LOWER BACK. THE PAIN FURTHER PROGERSSED IN A 10 DAY PERIOD TO WHERE THE EMPLOYEE SEEKED MEDICAL TREATMENT .

TAKING BOILER FAN MOTOR APARET WHEN PIECE OF PAINT RUST CHIPPED OFF MOTOR EMBEDDING IN RIGHT EYE STICKING TO CORNEA.

PIECE OF METAL PUNCTURE WOUND LEFT SIDE CHEST BY REMOVING A BEARING.

EE WAS PULLING BELT UP WITH CHAIN COM-A-LONG ANDCHOKER WRAPPED AROUND BELT UNDER A BUCKET. THE BUCKET TORE OFF THE BELT AND THE BELT SLIPPED THROUGH THE CHOKER HITTING HIM ON THE SIDE OF TH E LEG.

PICKING UP A REPULPER SHAFT WITH A COME A LONG.COME A LONG WAS NOT PROPERLY SECURED. SHAFT CAME LOOSE AND FELL ON EMPS RIGHT HAND CAUSING A LACERATION OF THE PINKY FINGER.

EMPLOYEE WAS CHANGING BEARING ON A TAILROLLR SHAFT. HE WAS PACKING THE SHAFT WITH A CROW BAR TRYING TO SLIDE THE BEARING ON WHEN THE SHAFT FELL. EMLYEE'S FINGER WAS SMASHED BETWEEN THE FLOOR AND THE CROW BAR WITH A SHAFT ON TOP.

SUBJECT WAS TRIMMING ENDS OF PLASTIC CURTAIN STRIPS WITH UTILITY KNIFE--KNIFE SLIPPED AND CUT LEG ABOVE RIGHT KNEE--SUBJECT WAS CUTTING TOWARDS HIS BODY.

CUTTING A PIECE OF METAL WITH A NIBBLER AND A PIECE OF METAL CURLED UP AND CUT 4TH FINGER ON LEFT HAND.

A BEARING RACE WAS BEING REMOVED FROM A SHAFT WHEN A SLIVER OF METAL FROM THE PUNCH BEIN USED HIT THE INJURED IN THE EYE.

EE WAS CLEANING A 1" ALUMINUM COUPLING WITH A METAL BRUSH ON A GRINDER WHEN THE BRUSH CAUGHT THE COUPLING AND THE EE S HAND WAS STRUCK BY THE BRUSH.

EMPLOYEES WERE LOWERING A LARGE PIPE INTO POSITION WHEN THE HANDLE ON THE COME A LONG BROKE. THEPIPE DROPPED APPROX 10" AND THE BROKEN HANDLE STRUCK THE EMPLOYEE ON THE RIGHT CHEEK CAUSING A DEEPM CUT REQUIRING STITCHES. THERE WILL NOT BE ANY PERMANENT DAMAGE OR IMPAIRMENT PER THE DR

INJURED BROOKINS WAS HELPING TO UNLOAD BAUXITE RAIL ROAD CARS. INJURED WAS OPENING AND CLOSING BOTTOM CAR DOORS WITH A STEEL BAR AS HE WAS USING STEEL BAR-IT SLIPPED AND HE FELL TO THE GROUND

EE WAS USING A BAND CUTTER WHEN HIS HAND SLIPPED, HITTING THE EXPOSED BAND END. (STITCHES--7/26--CUT WOULD NOT HEAL WITHOUT STITCHES.

THREE EE WERE WORKING TOGETHER TO TOPEN THE BOTTOM DOOR OF A RAIROAD CAR SO IT COULD BE UNLOADED EE WAS USING AN IRON BAR TO OPEN THE DOOR. HE FELT A PAIN IN HIS CHEST ON THE LEFT SIDE.

REMOVING RUBBER SKIRTING FROM BOTTOM OF EVEN FEEDER. RATCHET SLIPPED HITTING EMPLOYEE IN MOUTH, CHIPPING FRONT TOOTH.

EE CLEANING A CHUTE USING A CROWBAR--RIGHT RING FINGER GOT BETWEEN THE CROWBAR AND CHUTE. MASHED FINGER.

EMPLOYEE WAS CLEANING INFEED CHUTE TO KILN WITH A METAL ROD.HE STRUCK HIS FINGER ON A SHARP PIECE OF METAL WHICH WAS PART OF THE CHUTE.

WAS ASSIGNED SHUTDOWN WORK OF CUTTING SKIRTING FOR A HOPPER. HE WAS GIVEN INSTRUCTION PRIOR TO STARTING WORK. HE WAS GIVEN A UTILIY KNIFE. CARPENTERS SQUARE AND ANGLE TO BE USED AS A CUTTING E DGE. INDIVIDUAL WAS SCORING THE BELTING BY USING THE CARPENTERS SQ. THE KNIFE SLIPPED AND RAN INTO THE LEFT THUMB.

EMPLOYEE WAS REMOVING A CAP ON LINE WHEN PRESSURE CAUSED CAP TO BLOW OFF & STRIKE EMPLOYEE ON FOREHEAD.

EMPLOYEES LEFT HAND WAS CUT WHILE OPENING SODA ASH BAGS WITH A KNIFE.

CONVEYOR DRIVEN BY DC MOTOR. CONVEYOR WAS LOCKED DOWN AND EMPLOYEE USED PRY BAR TO GET THE COVNEYOR TO MOVE.

EMPLOYEE WAS ATTEMPTING TO FREE RUSTED BOLTS ON CONVEYOR DRIVE PULLEY. WHEN THE BOLTS BROKE LOOSE HIS HAND HIT THE SIDE OF THE PULLEY CUTTING HIS HAND.

TWO EMPLOYEES WERE WORKING ON BREAKING BELLY PAN LOOSE SO THEY COULD REPLACE THE STARTER. INJURED WAS LAYING UNDER DOZER USING A 3' CHEATER PIPE ON 3/4"PULL HANDLE. HE PUT BOTH FEET AGAINST THE HOUSING SO HE COULD PUSH WITH HIS LEGS TO HELP GET THE BOLTS LOOSE.

3 MEN MOVING SHUTTLE CONVEYOR. INJURED WAS USING A PRY BAR AND BAR SLIPPED AND HE FELL.

EMPLOYEE BUMPED HIS RIGHT KNEE ON A LAZY SUSAN WHEEL IN THE WELDING ROOM. AS HE REACHED DOWN TO RUB HIS KNEE HE HIT HIS ELBOW ON BLUNGER BLADE KNIFE.

ORIGINALLY STRAINED BACK WHILE CHANGING OUT A PUMP CASING. EMPL WORKED NORMAL JOB UNTIL 1-4-93 HIS BACK SPASMED AND WAS PLACED ON LOST TIME STATUS.

EMPLOYEE WAS TIGHTENING THE PACKING ON A CENTRIFUGAL PUMP WHEN HE FELT SOMETHING POP IN HIS BACK.

54736EYE WAS CHANGING BLADE IN UTILITY KNIFE WITH A SCREWDRIVER.THE SCREWDRIVER SLIPPED AND PUNCTURED EMPLOYEE'S LEFT PALM.SUTURES REQUIRED.

MECHANIC WAS STRIKING SLIDE PLATE ON SHIPPING ELEVATOR WITH HAMMER AND LITTLE FINGER OF LEFT HAND WAS CAUGHT BETWEEN HAMMER HANGER AND BEARING FRAME MECHANIC WAS NOT WEARING GLOVES AND MISJUDG ED AREA IN WHICH HE SWING HAMMER INJURY RESULTEDIN MECHANIC RECEIVEING 6 STITCHES AND RETURNED TO WORK.

EE WAS SEPARATING 2 PIPES WITH PRY BAR. AS HE WAS PULLING ON THE BAR HE SLIPPED AND FELL BRUISING HIS LEFT ARM AND LEG AND NECK.

PRYING THE CRYSTALS OFF AUGER HAND CAUGHT BETWEEN THE TWO LACERATIONS

I.NAME & OTHER WERE INSTALLING PVC PIPE.OTHER WAS BUMPING THE END OF PVC NIPPLE WITH A HAMMER WHEN FOREIGN BODY GOT INTO BOTH OF I.NAME EYES.REPORTED INJURY TO SUPV 1-27-92.WENT TO DR ON 1-29 DIDNT LOSE TIME BETWEEN DATE OF ACCIDENT AND DR VISIT.

54736YEE WAS HITTING A PUMP IMPELLER WITH A HAMMER WHEN A METAL SPLINTER LODGED IN HIS LEFT HAND.IT WAS NOT DISLODGED UNTIL AUGUST 27,1992 THAT A METAL SPLINTER WAS IN HIS HAND-IT WAS REMOVED.

EE WAS USING A 1 1/8 WRENCH TO LOOSEN BOLTS IN 5 BLUNGER PUMP MOTOR. AS HE PULLED ON WRENCH,EE WHAS A PAIN IN HIS LOWER BACK.

STRAIN TO BACK USING A PRY BAR UNDER AXLE OF SHUTTLE CONVEYOR. PRY BAR PLACED UNDER AXLE OF CONVEYOR AND EE WAS LIFTING UP ON PRY BAR.

EMPLOYEE WAS DISCONNECTING A CAM-LOCK COUPLING WHEN THE COUPLING BLEW-OFF AND HIT HIM IN THE KNEE.HAS RESULTED IN LOST TIME 1ST DAY LOST 06-24-91.KNEE SURGERY.

ENTERED PELLET BIN TO BREAK UP BUILD UP SO IT WOULD COME OUT OF THE BIN. MATERIAL BUILD UP WAS 8 FT ABOVE THE CONVEYOR BELT AT THE SOUTH SIDE OF THE BIN. HE AND HELPER WERE DIGGING MATERIAL LO OSE. HE MOVED TO NORTH END OF BIN. A LUMP OF BUILD UP FELL AND STRUCK LEFT KNEE.

INJURED WAS OPERATING THE WASH PLANT WHEN THE PULLEY OF THE CONVEYOR BELT HAD MATERIAL DROP DOWN IN THE PULLEY AREA. HE TOOK A STICK TO CLEAR THE MATERIAL WHEN THE STICK BROKE AND HIS RIGHT H AND/ARM WENT DOWN AND HIT THE PULLEY.

EMPLOYEE WAS BUILDING A WOODEN FORM.AS HE WAS NAILING A NAIL FLEW UP AND HIT HIM IN THE LEFT EYE.

ANOTHER EMPLOYEEW AS KNOCKING SPRACKET OFF SHAFT AND THE SPROCKET BUST. AS HE WAS PASSING BY A PIECE OF METAL HIT HIM IN THE FOREHEAD. TWO SUTURES REQUIRED.

BUSTING OUT CONCRETE PULLED RT ARM

REBUILDING ROLLER MILL. BEARING ADAPTOR WAS IN PLACE ON SHAFT AND HE WAS PUTTING THE NUT ON THE END OF THE SHAFT. THE BEARING ADAPTOR SLIPPED DOWN AND STRUCK HIS FINGE.R RIGHT HAND MIDDLE F INGER, BONE CRACKED.

EMPLOYEE WAS ATTEMPTING TO REMOVE A PLASTIC TIE STRAP FROM A SANDBLASTING HOSE WITH A KNIFE THE KNIFE SLIPPED & CUT THE EMPLOYEES LEFT HAND THREE(3) SUTURES REQUIRED

CHISELING METAL SHAFT WHEN A SLIVER OF STEEL WENT INTO IN HIS ARM.