Buscar en el registro

While loosening a nut with a ratchet and socket, socket slipped off nut pinching right pinky finger between ratchet handle and the ground, lacerating finger.

EE was prying a conveyor head pulley in preparation for assembly, the pry bar slipped and EE fell into conveyor frame, pinching and lacerating the tip of their right index finger.

While replacing a screen on wash plant another EE was using a pry bar to align the new screen, the other EE did not see EE's hand in the way and struck EE's hand with the pry bar causing a laceration between EE's ring and pinky finger of EE's right hand. 2 stitches at ER.

While cutting old belting with a utility knife, EE slipped and lacerated left thumb requiring 2 or 3 stitches.

EE complained about a sore right elbow 2 days later after unplugging a crusher feeder.

While nailing a splice template to a conveyor belt EE missed nail and struck his left thumb.

While pounding wedges into crusher to disassemble it, a piece of the steel wedge broke off penetrating the employee's abdomen. Employee has a follow up outpatient surgery to remove the object.

While disassembling a crusher a wrench on a bolt slipped off the bolt striking employee above left knee. Employee did not report that he was injured until 7/13/2015

While cutting conveyor belting with a utility knife the knife slipped cutting ee left thumb, required 2 stitches.

While removing obstruction from jaw crusher, lifting chain broke, cutting EE's finger.

Working on roller with another employee, placed in under a down swinging manual hammer. Hammer hit 4th ring finger

EMPLOYEE WAS PULLING ON A ROPE ATTEMPTING TO OPEN A BIN. THE ROPE BROKE AND EMPLOYEE FELL ONTO THE WATER RETURN FOR THE SCREW.

EE WAS DRIVING SLACK ADJUSTER WITH A HAMMER AND PUNCH. HAMMER SLIPPED AND HIT HIS RIGHT SIDE INNER KNEE.

EE WAS CHANGING STARTER SOLENOID WHEN HE TWISTED BACK DUE TO AWKWARD POSITION.

EE WAS PRYING A ROCK OUT OF THE SEC01 HEADBOX WITH A PRY BAR.

EMPLOYEE WAS WORKING WITH THREE OTHERS TO REMOVE THE SPEED REDUCER ON RETURN BELT #2. A PORTA POWER THAT WAS ATTACHED TO THE SPEED REDUCER SLIPPED OFF AND HIT THE EMPLOYEE'S RING FINGER KNUCKL E ON HIS LEFT HAND.

EE WAS INSTALLING PORTABLE GRIZZLY BARS ON A HOPPER, BARS WERE BEING LIFTED BY A CRAN EWITH CHAINS FASTENED TO THE BARS. A CHAIN BROKE CAUSING THE BAR TO FALL SPRIKING EE ON RIGHT FOOT. EE SUS TAINED A BROKEN BONE IN HIS FOOT.

WHILE INSTALLING A NEW TAPER LOCK ON A SHAFT IN A NEW HEAD PULLEY EE PINCHED PALM OF RIGHT HAND IN THE SPREAD OF THE TAPER LOCK WHEN THE SCREWDRIVER SLIPPED OUT.

MATERIAL HAD BUILT UP ON THE SIDE WALLS OF THE HOPPER. THE EE WAS ATTEMPTING TO CLEAN THE HOPPER WITH A SCRAPER WHEN THE SIDE WALL OF THE HOPPER CAVED IN CAUSING THE EE TO FALL INTO AN OPERATI NG FEEDER. EE HAD NEGLECTED TO TURN OFF FEEDER PRIOR TO CLEANING.

EMPLOYEE WAS REMOVING THE SHIM BOLTS FROM THE JAW CRUSHER BY USING A LARGE WRENCH.WHILE APPLYING PRESSURE TO REMOVE THE NUT FROM THE BOLT,THE NUT MADE A SUDDEN TURN AND THE EMPLOYEES LEFT HAND STRUCK THE SWING ARM ON THE JAW CRUSHER.

EMPLOYEE WAS MANUALLY INSTALLING A BEARING ON A CONVEYOR WITH A LARGE HAMMER HE MIS-STRUCK A BLOW WITH THE HAMMER TO HIS RT HAND CAUSING HIS HAND TO STRIKE THE BEARING HOUSING REQUIRED 11 STIT CHES

EE WAS ATTEMPTING TO TIGHTEN BOLTS ON THE CRUSHER. THE WRENCH SUPPED AND THE EMPLOYEE SMASHED THE RIGHT RING FINGER BETWEEN THE WRENCH AND THE SIDE OF THE CRUSHER. HE REPOENED THE CUT THAT WAS STARTING TO HEAL FROM THE 6/15 INJURY.

EMPLOYEE WAS ATTEMPTING TO ADJUST MOTOR ON 751 CRUSHER WITH A PORTAPOWER TYPE OF HYDRAULIC JACK THE PORTAPOWER SLIPPED OUT & HIT HIM IN THE HEAD REQUIRED 7 STITCHES