Buscar en el registro

USING BAR TO PRY UP A 12" VALVE TO ALIGN BOLT HOLES. REACHED DOWN W/RIGHT HAND TO ADJUST HEIGHT OF FULCRUM ROCK, FEET SLID ON LOOSE DIRT, CAUSING ME TO PUT WEIGHT ON BAR W/LEFT ARM, PINCHING R IGHT HAND FINGER BETWEEN BAR & ROCK.

EE WAS HELPING A MECHANIC REPLACE A 3" BRASS VALVE ON THE WATER TRUCK WITH 48" PIPE WRENCH. THE WRENCH SLIPPED PINNING HIS FINGER BETWEEN THE WRENCH AND TRUCK FRAME.

THE CRUSHER CREW WAS LIFTING FEEDER SPRING SUPPORTS WITH A CABLE COME-ALONG. THE OBJECT BECAME STUCK, AND EE TRIED TO FREE IT. THE RIGGING SLIPPED, AND THE METAL FELL STRIKING EE'S RIGHT LEG A ND ARM. EE RECEIVED A RIGHT LEG AND ARM CONTUSION. HE WAS TOLD TO ELEVATE LEG AND USE ICE PACKS.

EMPLOYEE WAS CUTTING AWAY A PIECE OF RUBBER FROM A 2" NIPPLE. THE KNIFE SLIPPED AND STABBED LEFT HAND BETWEEN THUMB AND INDEX FINGER.

INJURED WAS OPERATING THE JAW CRUSHER WHEN A ROCK BECAME LODGED IN THE JAW. HE WAS PRYING THE ROCK LOOSE WHEN THE BARSLIPPED. HIS RIGHT THUMB WAS CRUSHED BETWEEN THE PRY BAR AND HAND RAIL.RIGH T THUMB WAS BROKEN AND HE WILL LOOSE THUMBNAIL.

EMPLOYEE WAS CUTTING A CONVEYOR BELT WITH A UTILITY KNIFE. HE WAS PULLING KNIFE TOWARD HIMSELF. THE KNIFE SLIPPED OUT OF THE RUBBER AND HE STABBED HIMSELF IN THE LEFT THIGH.

29512ING ASSAY BUTTON WITH HAMMER AND CHISEL,MISSED CHISEL AND HIT HAND.

CUTTING DRIP TUBE TO BE PLACED ON HEAP LEACH. INSTEAD OF CUTTING AWAY FROM HIMSELF, THE OPERATOR CUT TOWARDS HIMSELF RESULTING IN A LACERATION TO HIS LEFT KNEE, REQUIRING SEVERAL STITCHES.

EMPLOYEE WAS USING A POCKET KNIFE TO CUT A HOSE. THE KNIFE WENT THROUGH THE HOSE AND INTO HIS THIGH.

EMPLOYEE WAS TAKING APART THE SUBDRIVER ON A DATELINE DRILL. T HE DRILLS TEEL WAS IN A VICE AND THE EMPLOYEE WAS USING A PIPE WRENCH. THE WRENCH HANDLE BROKE. HE LOST HIS BALANCE AND FELL HI TTING THE WORK BENCH WITH HIS MOUTH AND BROKE HIS TWO FRONT TEETH.

EMPLOYEE WAS HELPING SWEEP THE FLOOR OF THE LUNCH ROOM. HE WAS HOLDING THE DUST PAN WHEN A PIECE OF DEBRIS GOT IN HIS LEFT EYE. HE HAD SAFETY GLASSES ON AT THE TIME OF THE ACCIDENT.

ALIGNING BASE WITH SLEDGE HAMMER WHEN LEFT WRIST STARTED HURTING.

PRYING END OF TRUCK WITH BAR PULLED BACK MUSCLE

EMPLOYEE WAS CUTTING CONVEYOR BELTING WITH UTILITY KNIFE WHEN THE KNIFE SLIPPED CUTTING THE EMPLOYEES LEFT INDEX FINGER.

PRYING ON GATE OF BELLY DUMP WITH BAR HARD HAT FELL OFF HE DIDNT PUT IT BACK RAISED UP BUMPED HEAD ON PC OF METAL CUT HEAD

THE EMPLOYEE AND A CO-WORKER WERE REMOVING THE EXCENTRIC BUSHING FROM A SIMMONS CRUSHER. THE EMPLOYEE WAS HOLDING A DRIFT PIN WHILE THE CO WORKER STRUCK THE PIN WITH HAMMER. AFTER HAMMER BLO W PIN SLIPPED CAUSING THE EMPLOYEES HAND TO STRIKE THE EDGE OF THE STEP PLATE. LACERATING HIS FINGER.

THE EMPLOYEE HAD TACKED TWO PIECES OF STEEL TOGETHER FOR ALIGNMENT PURPOSES. HE WAS PRYING ON THE SHEETS ATTEMPTING TO PLACE THEM, WHEN THE TACK WELD BROKE LOOSE ALLOWING THE PRY BAR TO SLIP. THE BAR STRUCK HIM IN THE FACE CUTTING HIS RIGHT CHEEK.

ONE LEG OF THE CHUTE STAND BECAME CAUGHT BETWEEN DUST COVER AND CONE FRAME. THE CHUTE STAND WAS HANGING FROM A CRANE CABLE. THE EMPLOYEE WAS PRYING THE LEG LOOSE WHEN IT CAME LOOSE IT SWUNG AR OUND AND HIT THE EMPLOYEE'S HAND. HE WAS HANGING ON THE SIDE OF THE CONE CRUSHEWR BECAUSE THERE IS NO WALKWAY. IF HE WOULD HAVE LET GO OF THE CRUSHER HE WOULD HAVE FELL APPROX. 15 FEET.

PUTTING TRACK ON CAT, PRYING ON TRACK, BAR GAVE WAY AND FLIPPED, HIT FINGER AGAINST CAR CAUSING LACERATION.

CUTTING HOLES IN RUBBER TO PUT ON DRILL. POCKET KNIFE FOLDED UP CUTTING R. INDEX FINGER.

CAUGHT FINGER BETWEEN WRENCH AND PC OF METAL

EMPLOYEE WAS PULLING ON PRY BAR,HE APPARENTLY STRAIGHTENED HIS ABCK,FEELING PAIN .

EMPLOYEE WAS TRIMMING INSULATION OFF OF AN ELECTRICAL CORD WITH A KNIFE. THE KNIFE SLIPPED, CUTTING THE PALM ON HIS LEFT HAND.

EMPLOYEE WAS PULLING SHEETS OF LINER. THE HAND CLAMPS SLIPPED OFF AND HE FELT SOMETHING TEAR IN HIS LEFT SHOULDER. HE THEN FELL DOWN.

EMPL TIGHTENING BOLT ON BALL MILL LID BOLT BROKE CAUSING WRENCH TO SLIP & HE LOST BALANCE & FELL 15' TO CONCRETE FLOOR BELOW.

EMPL WAS SAWING PIPE WITH HAND SAW SAW CAME OUT OF GOOVE DURING STROKE & CUT LEFT INDEX FINGER BY KNUCKLE.

EMPL OYEE WAS TIGHTENING SPRINGS WITH A PIPE WRENCH.HE WAS PULLING DOWN WITH THE WRENCH AND HIT THE BACK OF HIS LEFT MIDDLE FINGER BETWEEN THE METAL AND THE WRENCH.

EMPLOYEE WAS CUTTING PLASTIC PIPE WITH A KNIFE AND HIS AHND SLIPPED AND HE CUT HIS RIGHT KNEE.

EMPL WAS UNTAPING MOTOR CONNECTION ON 50 HP MOTOR HE WAS CUTTING THROUGH TAPE & UTILITY KNIFE SLIPPED CUTTING LEFT THUMB.

INJURED & TWO OTHER EMPL WEREE MOVING HAMMER ONTO DRILL DECK. HAMMER SLIPPED FROM INJUREDS HAND & CAUGHT ONE OF HANDS BETWEEN DECK & HAMMER.