Buscar en el registro

Miner reported that their shoulder was hurting and believes it was from swinging a sledge hammer while changing out the pins on the stab shoe.

Strained shoulder while using an 8 pound hammer while pounding the outside of the bin. This was not EE's normal job and EE was helping a Maintenance Tech. EE hurt it on 2/7/2020. EE reported it on 2/17/2020, EE saw a doctor on 2/18/2020, EE could continue to do normal job of operating equipment. EE's shoulder did not improve and surgery was needed on 4/1/2020.

Strain to upper arm, possible tear to bicep muscle. Mechanic was repairing a broken coolant line on a haul truck. Was reaching to remove the fitting and pulling on the wrench when they felt something in upper arm pop. Was taken to the ER and was given a 10 pound lifting restriction and scheduled a follow-up with a orthopedic doctor.

The operator applied the socket to the segment bolt head on the D8 Dozer sprocket and was in the process of applying downward pressure when the socket came loose resulting in left thumb getting caught between the wrench handle and the lifting eye on the right pusher arm. The operator sustained a laceration requiring three stitches and fracture to the left thumb.

Employee was hitting the #6 mill dust collector with a 4# sledge hammer to improve flow of material to a screw conveyor. The employee was bracing himself with his right hand when the hammer bounced and hit the hand, breaking the finger and needing 8 stitches.

Mechanic was replacing a broken block pin in a cutter block using a punch and 3 lb. hammer. Upon striking the punch with the hammer, a piece of pin that was being driven out broke away. This "zinger" struck the mechanic in the tooth and upper lip. A small corner was broken off the tooth.

EMPLOYEE STATED HE WAS CUTTING A WATER LINE WITHA HACK SAW AND A PIECE OF METAL BLADE OR WIRE GOT INTO HSI RIGHT EYE.

EE WAS CUTTING A PIECE OF PIPE AND KNIFE SLIPPED AND HE CUT THE TOP OF HIS RIGHT LEG.

EMPLOYEE WAS HITTING A ROPE DOG WITH A HAMMER AND A SMALL PIECE OF METAL FLEW OF STICKING IN HIS CHEST.

EMPLOYEE WAS INSTALLING A BEARING IN A WHEEL HUB. WHEN HE STRUCK THE RACE DRIVER (TOOL) WITH THE HAMMER, THE HAMMER GLANCED OFF, STRIKING HIS ARM.

EMPLOYEE WAS DRYING ON SPEED REDUCER TO DRIVE WITH SLATE BAR & BAR SLIPPED & HIT EMPLOYEE ON LEFT EYE

EMPLOYEE WAS TRIMMING THE GBELT & HIS KNIFE & THE KNIFE SLIPPED & CUT HIS LEFT LITTLE FINGER

55061S PUTTING A NEW TRAM CHAIN TOGETHER ON A MINER AND HE HIT IT WITH A HAMMER AND A SMALL PIECE OF METAL STRUCK HIM UNDER HIS LEFT EYE THERE WERE NO LOST TIME FROM THIS ACCIDENT.

HE WAS PULLING SCOOP BACK TOGETHER WHERE THE SCOOP WAS BJROKE INTO AND THE CHAIN BROKE AND HE HIT THE LEFT SIDE OF HIS HEAD ON THE SCOOP.

EMPLOYEE WAS CHIPPING A CINDER BLOCK AND A PIECE OF CINDER BLOCK FLEW UNDER HIS SAFETY GLASSES AND GOT INTO HIS LEFT EYE.

HE HAD CUT A BOLT HEAD OFF OF A BOLT HOLDING DRUMS ON MINER. HE WAS KNOCKING THE BOLT THROUGH THE HOLE AND A PIECE OF SLAG FLEW IN HIS RIGHT EYE.

MOVING A PIECE OF METAL WITH SLAGE BAR INJURYING BAKC

HE WAS USING SHOP HOIST TO PULL A DRIVELINE SHAFT OUT OF A 21SC SHUTTLE CAR THAT HE WAS WORKING ON IN SHOP. THE CHAIN SLIPPED LOOSE AND HIT HIM ABOVE HIS LEFT EYE.

HE WAS HOLDING PIN TRYING TO GET CONVEYOR CHAIN BACK ON MINER AND HIT HIS RIGHT THUMB WITH HAMMER.

EMPLOYEE WAS INSTALLING TIGH VOLTAGE AT NEW UNDERROUND MINE WHEN THE KNIFE HE WAS USING SLIPPED.

EMPL WAS PRYING WITH SLATE BAR TO GET TRAM CHAIN READY TO GO BACK TOGETHER HE PULLED OR TWISTED BACK.

BEATING BRATTICE OUT WITH HAMMER AND STRAINED BACK.

LOOSENING BOLTS, RACHET SLIPPED EMPLOYEE FELL AND TWISTED KNEE.

CHANGING UNLOADER ON TRUCK BY HITTIN GOLD UNLOADER WITH HAMMER. HAMMER BOUNCED OFF & HIT KNEE.

EMPLOYEE WAS REMOVING REAR SUSPENSION CYLINDER FROM 773B CAT TRUCK. AS HE WAS REMOVING TOP PINON CYLINDER, HE HIT LEFT HAND WITH A SHOP HAMMER AND BRUISED LEFT HAND.

HE WAS PRYING THE CENTER SECTION IN A SCOOP WHILE HE WAS PRYING IT WITH A SLATE BAR THE SLATE BAR SLIPPED AND HIT HIS HAND BETWEEN THE SCOOP AND SLATE BAR.

BREAKING TRAM CHAIN APART, CHAIN BROKE AND WENT INTO LEFT HAND.

KNOCKING SHAFT FROM HOUSING HAMMER SLIPPED HITTING FIRST FINGER ON RIGHT HAND.

EMPLOYEE WAS HOLDING CHAIN WHILE ANOTHER EMPLOYEE WAS DRIVING OUT PIN IN CHAIN,A PIECE OF STEEL CAME OFF OF PIN AND WENT INTO RIGHT FOREARM.

EMPL LIFTING WHEEL UNIT WITH BAR AND STRAINED HIS BACK.

KNOCKING BEARING OFF SHAFT PIECE OF METAL GOT IN RIGHT EYE.

EMPL WAS REPLACING FRONT IDLER ON TD25G DRESSOR DOZER AND EMPL HIT R ELBOW ON BOLT

EMPL CLEANING FILTER CHUTES WITH SLEDGE HAMMER.HAMMER GLANCED INJURING MIDDLE FINGER LT HAND.

EMPLOYEE WAS USING A CHAIN TO LOAD SUPPLIES MUD CAME OFF CHAIN & HIT HIM IN THE EYE PRESCRIPTION

EMPLOYEE WAS USING A HAMMER TO PUT CHAIN ON MINER. A PIECE OF METAL HIT HIM ON HAND. PRESCRIPTION GIVEN.

EMPLOYEE WAS USING A CHAIN HOIST TO PULL A BUGGIE BACK ON TRACK WHEN CHAIN BROKE ON HOIST HITTING HIM ON ARM BRUSING HIS ELBOW

INJ WAS HITTING METAL HAMER SLIPPED LETTING MIDDLE FINGER ON LEFT HAND HIT M EMETAL

EMPLOYEE WAS USING A RAILROAD JACK TO LIFT A RAIL IN TRACK, THE JACK SLIPPED OUT AND CAUGHT HAND AGAINST RAIL, CUTTING RIGHT THUMB.