Buscar en el registro

EE was cleaning out a rock and snow jam with a digging bar when a rock fell down and struck a finger which was holding the digging bar. Closed fracture of right ring finger. EE on restricted duty, but never lost any time.

EE was working on the Primary #1 Feeder Mount. A spring was broken on the right 3/4 inch bolt. EE replaced the spring and was tensioning the guide nut, a worn portion of the bolt that was weakened failed, launching the weakened portion into EE's right cheek due to the stored energy of the upper spring.

Cutting rubber skirting to put on screen deck, was cutting away from belt and knife slipped and went across EE's left leg.

Chute got backed up, hit with sledge hammer four times and hurt right shoulder. Unspecified sprain of right shoulder joint.

Trimming a conveyer belt Employee cut hand requiring 5 stitches. Medical claim

Attaching a cylinder to the blade of a dozer ---when the pry bar slipped and the cylinder smashed the tip of the Emp left middle finger --- requiring stitches.

While wrenching on a cylinder on a piece of equipment the wrenches pressed together and cut into the nail and tip of the mechanic's rt ring finger requiring stitches.

Working on the track of the skid loader with a crowbar. Got hand (baby finger) in harm's way and crushed / cut finger --- requiring 2 stitches

Emp was hitting shoe on a blow bar and hit a hard surface, a piece of steel struck and cut EE's finger. EE got 1st aid and continued to work. Emp worked until 9-28-2020 when they found a piece of steel in EE's finger and had it removed. EE then went on RD as of 9-29-2020.

While holding a bolt in left hand Emp struck bolt with hammer. Emp missed bolt and struck finger on left hand, resulting in 6 stickers.

Employee was using a knife to open up a package of soap stone and cut left hand pinky finger... requiring 4 stitches.

Employee was cutting skirt rubber when the blade slipped and cut his finger

Employee was cutting a belt and the knife slipped and cut his little finger.

Hammer slipped out of hand, bounced off machine and struck injured worker in the jaw...cut jaw 3 stiches.

Employee was driving a king pin out of a truck axle when a nut flew off the pin and struck him above the left eye, cutting his face and cracking the bone.

Employee was changing impact bars on a crusher. He attempted to block the rotor with a pry bar and the bar pinched his finger against the frame.

CUTTING RUBBER BELT WITH RAZOR KNIFE AND KNIFE SLIPPED.

EMPLOYEE WAS STANDING ON 4TH ROW STEP TAKING OFF #3 BELT ROLLER WHEN THE WRENCH SLIPPED OFF CAUSING EMPLOYEE TO FALL.

EE WAS ATTEMPTING TO DISLODGE BUILT UP MATERIAL IN THE SCREEN CHUTE WHEN MATERIAL CAME LOOSE AND STRUCK HIS LEG.

EE WAS INSTALLING POLYDECK PANELS USING A HAMMER. WHEN EE STRUCK THE PANEL A PIECE OF METAL ENTERED HIS EYE.

EMPLOYEE WAS TRIMMING A URETHANE SCREEN WITH A UTILITY KNIFE PULLING IT TOWARD HIMSELF WHEN IT SLIPPED OFF THE SCREEN AND CUT HIS WRIST.

EE WAS OPENING DOOR ON CRUSHER HE PUT A BAR BETWEEN DOOR AND HOUSING AND BAR SLIPPED OUT CAUSING HIM TO FALL & TWIST KNEE.

THE EE WAS CUTTING RUBBER BUCKET UP CHANNEL WHEN THE KNIFE SLIPPED AND CUT HIM.

EE WAS CUTTING A PIECE OF CARDBOARD WITH SCISSORS & CUT THE FLESH BETWEEN HIS FINGERS

EE WAS CUTTING A HOLE IN THE BELT WITH A UTILITYKNIFE WHEN THE KNIFE SLIPPED CUTTING THE PALM OF HIS LEFT HAND.

EMPLOYEE WAS SPLICING BELT, WHEN THE CABLE THAT WAS HOOKED TO THE ANGLE IRON ON THE BELT BROKE FORCING THE ANGLE IRON BACK ON THE EMPLOYEE'S LEFGS, CAUSING CONTUSIONS TO BOTH FEMURS.

EE WAS PUNCHING A HOLE IN A BARREL OF MINE GUARD WITH A HAMMER AND PUNCH. WHICH IS NORMAL PROCEDURE. A PIECE OF THE MINE GUARD FLEW INTO THE EE S RIGHT EYE CAUSING CHEMICAL BURNS.

EE WORKING ON DUST SHIELD WHEN A PRY BAR CONTACTED LAGGING AND PINCHED THE EE'S FINGER AGAINST FRAME.

EE WAS CLEANING BELT 12 DISCHARGE CHUTE TO BELT 13 WITH A BAR. WHILE POKING THE CHUTE HE STRUCK HIS LEFT FOREARM ON THE HANDRAIL, CAUSING A CONTUSION.

EE WAS CUTTING A THICK PIECE OF RUBBER WITH A RZXX RAZOR KNIFE PULLING TOWARDS HIMSELF WHEN HE SLIPPED AND CUT HIS THIGH.

EMP WAS TRYING TO GET FROZEN MATERIAL OUT OF THEHOPPER USING A DIGGING BAR. IT SLIPPED OFF THE ANGLE IRON HE WAS PRYING AGAINST AND CAUGHT HIS HAND BETWEEN IT AND THE SENSOR SWITCH.

INJURED WAS CUTTIGN WITH A UTILITY KNIFE. THE MATERIAL THAT HE WAS CUTTING WAS VERY THICK AND TOOK A LOT OF EFFORT TO CUT. INJURED WAS CUTTING DIRECTLY TOWARDS HIS BODY. THE KNIFE SLIPPED AND CUT HIS LEG.

EE CHANGING IDLER ON BELT 22 CONVEYOR. WHILE USING RATCHET AND WRENCH TO REMOVE, BOLTS, WRENCH SLIPPED OFF NUT, CAUSING FINGER TO BE PINCHED BETWEEN FRAME AND WRENCH.

EMPLOYEE CUT FINGER NEAR KNUCKLE WHILE USING A UTILITY KNIFE TO CUT SKIRTBOARD RUBBER.

68935 TRYING TO DISLODGE ROCKS FROM CHUTE WITH PRY BAR,GOT HIT ON BACK OF LEFT HAND WITH ROCK.

WORKING IN WELDER SHOP,GOT PIECE OF METAL IN RIGHT EYE.

WAS CUTTING PIECE OF BELT WHEN KNIFE SLIPPED AND CUT HIM ON THE LEG.

EMPLOYEE WAS BEATING A CHUNK OF IRON ORE AND A SMALLER CHUNK FLEW UP AND HIT HIM ON THE CHIN.

EMPLOYEE WAS APPLYING TORQUE TO A LARGE WRENCH-IT SLIPPED OFF NUT-EMPLOYEE LOST BALANCE AND FELL BACKWARD AGAINST CATWALK AND HANDRAIL-BRUISING RIBCAGE AND SHOULDER.

A CHOKE UP OF MATERIAL OCCURRED IN CHUTE FROM BELT 21 TO BELT 25 IN FINISH DEPARTMENT. EMPLOYEE TOOK A ROD AND POKED AT MATERIAL TO DISLODGE CHOKE UP. A CHUNK OF MATERIAL BROKE LOOSE AND AS HE BEGAN TO REMOVE WITH HIS HAND, HE CUT HIS WRIST ON A JAGGED PIECE OF METAL ON ACCESS DOOR FRAMEWORK.

EMPLOYEE WAS TR2ING TO DISLODGE A ROCK STUCK IN THE JAW CRUSHER. HE WAS PRYING WITH A CLAW WHEN A PIECE OF THE ROCK BROKE OFF AND HIT H IM IN THE FACE, HE SUFFERED A BROKEN RIGHT FACIAL BONE.

EMPLOYEE WAS IN8TALLING CHUTE EXTEMSION ON CRUSHER.WHILE USING PRY BAR TO POSITION THE CHUTE,HE STRAINED BACK AND RIGHT LEG;NERVE INFLAMMATION.

EMPL CUTTING OU7 TREES IN FENCEROW.LIMB WAS TWISTED AND WHILE FINISHING CUT,IT BROKE AND FELL ONTO EMPL LEFT HAND MASHING AND LACERATING INDEX FINGER.

EMP WAS DISLODG3NG MATERIAL HUNG UP ON FRAMEWORK AT FINES PILE HE WAS STANDING ON LADDER STEADYING HIMSELF WITH ONE HAND AND USING 8 LB SLEDGE HAMMER WITH THE OTHER HAND HE STRUCK MATERIAL WHICH WAS HARD 8LEDGE GLANCED OFF MATERIAL AND STRUCK HIS RT WRIST

EMPLOYEE WAS CHANGING SCREENS DRIVING PUNCH BAR THE HAMMER FLEW OFF OF HANDLE STRIKING LEFT HAND CAUSING LACERATION WHICH REQUIRED SUTURES