Buscar en el registro

Employee alleges EE was removing bearings and a piece of sliver steel went into EE's left hand.

Employee alleges EE was replacing some belts using a pipe wrench and EE missed the handle smashing EE's right pinky finger. EE received 3 stitches.

Employee utilized leverage to free a stuck part when the applied force caused the tooling to come into contact with their face.

Employee alleges EE was cutting top of belt on a conveyor with a knife and the knife slipped and cut EE's left forearm/wrist.

Employee alleges they were pulling a rock out of the jaw feeder and the strap came loose hitting them in the right arm. Employee received some cut and bruises. Employee went to the Dr. on 09/16/24 and has been placed on restriction. Employee started losing time on 09/17/24.

Employee alleges they were shoveling off a overloaded conveyor and right thumb hit a metal chute causing a sprain to the right thumb. They had to wear a splint for the thumb.

Employee alleges employee was using a hammer to fix a hub and the hammer slipped out of employee's hand cutting left thumb. Employee received 10 stitches.

Employee was belt splicing when EE reached for the skiver tool by twisting backward to the right, reaching with EE's right hand/arm. Once EE had hold of tool EE realized it was hung on a piece of belting, EE started pulling and jerking to free up the tool when EE heard pop from shoulder and felt pain.

Employee alleges EE was changing bucket teeth on a loader and EE tried to tap the end of tooth with a hammer. A small piece of metal came off the tooth striking EE in the chest. EE had surgery on 09/14/2020 to remove the piece of metal.

Employee alleges was prying a rock from a gearbox and it hit employee in right eye and nose knocking off the safety glasses and causing right eye and nose to be swollen.

Employee alleges they were hitting the end of the rotar plate with a sledge hammer and they hit their left thumb. Employee has a fracture to the left thumb.

Employee alleges ee was replacing bolts and left thumb went under the bolts pinching ee's left thumb.

Employee alleges was cutting a zip tie and the utility knife slipped and cut EE's left hand. EE received stitches.

Employee alleges was tightening a bolt with a ratchet and the ratchet slipped smashing right ring finger. Employee received stitches.

Employee alleges EE was tightening liner bolts and the wrench hit EE's gloves cutting EE's right palm. EE received stitches.

Employee alleges was swinging a hammer to bust up some rock and EE hurt left upper arm. The employee didn't loose anytime. EE had surgery on 06/13/2016 and EE started loosing time.

Employee alleges he was taking off a filter with a wrench and he bent over and he felt a sharp pain in his lower back.

Employee alleges he was working on the top deck of the primary screen. He slipped with a utility knife in his right hand and he cut himself on his left forearm. He received stitches.

Employee alleges he was removing bearings and he hit his left knee with the hammer handle causing a laceration to his left knee.

Employee alleges he was tightening bolts with a wrench and a hammer, the hammer slipped and hit his hand and he cut his hand - receiving 10 stitches.

Employee alleges he was cutting open a tube with a utility knife and it slipped cutting his right arm. He received stitches.

Employee alleges he was checking oil screen, ratchet slipped and he dislocated his left pinky finger.

Employee alleges he was cutting off plastic fitting and the pocket knife he was using slipped and cut the tip of his right index finger off.

Dr related cyst surgery to the original injury of broken fingers on 3-5-03. This is an ongoing injury.

Employee alleges he was cutting belting strips and the utility knife slipped and cut his right knee. He received 3 stitches.

Employee alleges he was lining a piece of steel in the saw as he closed the clamping vice the end of his fingers got caught in the vice, smashing his fingers.

Employee alleges he was cutting a belt guard with a razor knife and it slipped and cut his wrist. He received stitches

EE ALLEGES HE WAS HOLDING A PUNCH FOR A CO-WORKER AND THE CO-WORKER SWUNG THE HAMMER AND MISSED THE PUNCH AND HIT HIS LITTLE PINKY FINGER ON HIS RIGHT HAND.

EMPLOYEE ALLEGES HE WAS TIGHTENING BOLTS ON IMPACT AND WRENCH SLIPPED AND SMASHED HIS MIDDLE FINGER ON HIS RIGHT HAND.

HITTING WEDGE WITH SLEDGE HAMMER - BROKE BONE AT END OF FINGER.

EE ALLEGES HE WAS REMOVING BEARINGS FROM SHAFT AND HIS HAND GOT CAUGHT BETWEEN THE PORTAPOWER AND THE ANGLE IRON.

EE WAS TIGHTENING BOLTS ON LINER AND THE WRENCH SLIPPED OFF OF BOLT & HIS ELBOW HIT HAMMER HEAD LAYING ON CHUTE.

EMPLOYEE ALLEGES HE WAS PUTTING CUTTING EDGE BACK ON DOZER AND AS HE WAS HITTING DOZER WITH A HAMMER A PIECE BROKE OFF AND WENT INTO HIS RIGHT LEG.

EMPLOYEE ALLEGES HE WAS LIFTING BLOCKS TO PUT UNDER PONTOONS, THE CHAIN CAME LOOSE AND HIT HIM ON HIS LEFT HAND.

EMPLOYEE ALLEGES HE WAS TRYING TO TRIM PLASTIC FUEL LINE ON LOADER TO SPLICE TOGETHER AND THE UTILIT KNIFE SLIPPED AND CUT HIS LEFT THUMB.

EMPLOYEE ALLEGES HE WAS TURNING OVER A SUPPORT STRUCTURE WHEN A SMALL PIECE OF TUBING BROKE OFF AND STRUCK HIM IN HIS RIGHT SHOULDER BLADE AND BACK.

EMPLOYEE ALLEGES HE WAS CUTTING BELT AND THE UTILITY KNIFE SLIPPED AND HE CUT HIS LEFT HAND BY THE BASE OF HIS THUMB.

EE ALLEGES HE WAS CUTTING BELT AND THE KNIFE SLIPPED AND CUT HIS LOWER RIGHT LEG.

EMP WAS REMOVING TOOTH FROM LOADER. HIT TOOTH WITH HAMMER TO LOOSEN UP AND THE CORNER OF TOOTH CHIPPED AND METAL WENT INTO LEFT FOREARM.

EE WAS TRYING TO REMOVE FROZEN BUILDUP OF MUD AND BASE ROCK FROM CHUTE BY STRIKING IT REPRTITIVELY WITH A SHOVEL.

EE WAS WORKING ON TRUCK WHILE SWINGING SLEDGE HAMMER HE HIT HIS ELBOW ON TRUCK FRAME.

EMP WAS WORKING ON EQUIPMENT LOOSENING BOLTS ANDSTARTED FEELING PAIN IN RIGHT HAND AND CHEST MUSCLES.

EMPLOYEE WAS TIGHTENING SCREEN CLOTH AND RATCHET GEAR SLIPPED AND BRUISED KNUCKLES ON RIGHT HAND.

EE WAS PUSHING ON RATCHET TO LOSSEN WEDGE BOLT, IT CAME LOOSE, HIS FINGER WAS PINCHED BETWEEN THE RATCHET HANDLE & THE CRUSHER SUPORT BEAM CAUSING HIM TO BREAK A BONE IN LEFT RING FINGER.

EE WAS UNPLUGGING BRIDGE IN TUNNEL CHUTE, BRIDGECAME LOOSE HITTING THE BASE OF THE SHOVEL KNOCKING THE HANDLE UP AGAINST HIS JAW. CAUSING HIM TOCHIP HIS TOOTH.

EMP WAS REMOVING THE NUT FROM THE BOTTOM OF THE CYLINDER ROD, NUT WAS TIGHT, EMP WAS USING A PIPE FOR AN EXTENSION. THE END OF THE PIPE WAS JAGGED AND HE CUT HIMSELF ON RT HAND WHEN NUT LET GO

EE WAS STANDING ON STEPP LADDER WHILE SCRAPING WET BUILT UP MATERIAL ON TAIL PULLEY WHEN WRENCH CAUGHT ON PULLEY AND MATERIAL, SMASHED HAND BETWEEN FRAME AND WRENCH.

EE WAS TEARING PUMP APART AND TRYING TO BREAK NUT LOOSE, WRENCH CAME OFF AND HE TWISTED HIS LOWER BACK AND BOTH FEET WENT NUMB.

EMPLOYEE WAS JACKING UP COUNTERWEIGHT. COUNTERWEIGHT SHIFTED AND CAUGHT HIS FINGER BETWEEN PIPE AND ROLLER.

EE WAS TRIMMING SKIRT BOARD RUBBER WITH UTILITY KNIFE. HE WAS PULLING KNIFE TOWARD HIS BODY WHENKNIFE SLIPPED & PUNCTURED INSIDE RIGHT ARM BETWEEN WRIST & ELBOW. HE RECEIVED 2 STITCHES.