Buscar en el registro

EE CLAIMS HE GOT HIS RIGHT KNUCKLE CAUGHT IN BETWEEN A HEAVY BAR AND SOME ANGLE IRON. HE WAS TRYING TO CLEAN OUT THE CHUTE FROM #4 BELT TO THE #5 BELT.

EE ALLEGES WHILE HE WAS PRYING BEARING CAP WITH TRACK BAR AND BAR SLIPPED AND FELL DOWN ON FLOOR AND HIT HIM ON LEG, ELBOW, BACK AND UPPER & LOWER THIGH. THE REASON THIS IS SO LATE IN BEING RE PORTED IS THAT EE WAS ABLE TO DO HIS REGULAR JOB UNTIL HIS RESTRICTIONS WERE CHANGED ON 1/13/04.

TWO EMPLOYEES WERE PRYING OUT DRIVE BEARING OFF OF #3 KILN INCLINE SCREW. THE BAR SLIPPED AND ONE EMPLOYEE PULLED A MUSCLE IN BACK.

EE WAS ALLEGEDLY CHECKING THE HEAD PULLY/PUMP DRAFT LINE ON #1 RAW MILL WITH A HAMMER IN DOING SO, HE ALLEGEDLY CUT HIS LEFT FOREARM ON A PIECEOF INSULATING SHEET METAL.THE LACERATION REQUIRE D SUTURES.

EE ALLEGES HE WAS SCRAPING THE WINDOWS ON THE LOCOMOTIVE WITH A RETRACTABLE RAZOR SCRAPER. HE LOST THE SINGLE EDGE BLADE THAT GOES IN THE SCRAPER. HE ALLEGES HE BEGAN LOOKING FOR THE RAZOR ON THE FLOOR AND COULD NOT FIND IT. HE WAS THEN CALLED TO MOVE THE LOCOMOTIVE. HE ALLEGES THAT WHEN HE SQUEEZED THE HAND BRAKE HE FELT A PAIN ON HIS LEFT HAND THE RAZOR CAME OUT THRU THE TOP OF T

EE ALLEDGES THAT HE AND THREE OTHER REPAIRMEN WERE CHANGING THE SOUTH CRANE DRIVE WHEEL. THEY WERE REMOVING THE TOP WALKWAY PLATE AND THE WRENCH HE WAS HOLDING SLIPPED AND HE HIT HIS ELBOW ON THE CRANE.

EMPLOYEE ALLEGES HE WAS PULLING ON CHAIN HOIST, WHILE PULLING #1 KILN HOOD IN PLACE. ANOTHER WORKER WAS HOLDING A HEAD ROLLER AND LET IT SLIP AS EMPLOYEE WAS PULLING ON THE CHAIN. EMPLOYEE SAY S HE GAVE A STRONG PULL WITHOUT RESISTANCE AND INJURED HIS BACK.

EE INJURED SHOULDER WHILE SWINGING SLEDGE HAMMER& HANDLING HEAVY METAL. THIS IS AN OLD INJURY FROM 5/10/01 THAT HE AGGRAVATED.

EE WAS HOLDING PIN WHILE OTHER EE WAS DRIVING PIN INTO A CHAIN. THE HAMMER GLAZED OFF OF CHAIN& HIT EE ON LEFT POINT FINGER,INJ EE CONT WORK UNTIL 12/2/99 & REQUESTED TO SEE DR FOR SWOLLEN F INGER HIS LEFT POINT FINGER IS FRACTURED & IS NOW IMMOBOLIZED BY SPLINT

EMPLOYEE WAS CUTTING OPEN A FORKLIFT FILTER BOX WITH A KNIFE WHEN HE CUT HIS LEFT THUMB. LACERATION REQUIRED STITCHES.

EE WAS WORKING IN #3 KILN USING A BRICK BAR AND RIVET GUN OVER HIS HEAD. EMPLOYEE DEVELOPED PAIN IN HIS RIGHT ELBOW. CONTINUING PROBLEMS WITH ELBOW MAKES THIS A REPORTABLE INJURY.

BUMPED RIGHT ELBOW AND CAUSED OLECRANON BURSITIS DUE TO REPETITIVE HAMMERING.

EE WAS JACKING UP RAW MILL AND STRAINED HIS RIGHT SHOULDER.

EMPLOYEE IS A REPAIRMAN. WHILE REMOVING HEAD LINERS FROM RAW MILL, A COLD CHISEL BOUNCED BACK AFTER BEING STRUCK AND HIT EMPLOYEE IN FOREHEAD. EMPLOYEE WAS TAKEN TO HOSPITAL , TREATED/RELEASED HAD SEVERAL STITCHES AND RETURNED TO WORK ON THESAME DAY.

EE WAS WORKING IN THE MACHINE SHOP HE HIT HIS LEFT INDEX FINGER WITH A HAMMER

WORKING WITH WRENCH AND IT SLIPPED MASHING FINGER AGAINST METAL PIPE.

EE WAS SWINGING A SLEDGE HAMMER IN THE 222 FLOP GATE AREA AND HE HIT HIS FINGER RIGHT LITTLE FINGER ON A PIECE OF STEEL CAUSING A FRACTURE. SPLINT APPLIED AND HE RETURNED TO WORK NO LOST TIME.

EE WAS USING A PORTAPOWER TO MOVE A PORTION OF THE CRUSHER TO HELP LINE UP HOLES AND THE JACK KICKED BACK AND HIT HIM IN THE NOSE RESULTING IN A FRACTURE AND CUT.

WHILE WORKING HIT ELBOW ON BRACKET. A KNOT FORMED ON ELBOW AND REMAINED FOR 2 WEEKS AND DID NOT GO DOWN, TOOK TO DR ON 4-28-99 TO DRAIN FLUID ON ELBOW.

EMPLOYEE WAS USING A PORTAPOWER ON THE GYP BIN. WHEN PRESSURE WAS RELEASED ON THE PORTAPOWER THEBAR FELL ONTO EMPLOYEE'S LEFT FOOT. STEEL TOE BOOTS WERE IN USE, BUT THE PIECE HIT RIGHT BEHIND THE STELL TOE..

PULLING A BEARING OFF A SHAFT AND BEARING BROKE LOOSE AND HIT EMPLOYEE.

EMPLOYEE STATES WHILE USING A HAMMER, HE STRUCK HIMSELF IN THE TESTICLES. ON 01/28/99, INJURY WAS DIAGNOSED AS A HERNIA.

WHILE EE WAS CHANGING SILO VALVES THE BAR SLIPPED OUT OF THE VALVE AND HE PINCHED HIS FINGER BETWEEN THE BAR AND VALVE BODY.

EE WAS REMOVING CHUNKS FROM SILO #45. EE HIT THE SHANK END OF A 3 FT JACKHAMMER STEEL WITH A HAMMER. A STEEL SLIVER COME OFF SHANK END OF STEEL AND HIT EE IN THE LEFT EYE. EE WAS NOT WEARING S AFETY GLASSES.

EE STATED WHILE DRIVING PICKS IN #10 CLINKER FEEDER, HE FELT SOMETHING IN HIS EYE. SAW DR ON 9-19-98 (PRESCRIPTION DRUGS) NO LTA.

EE STATED HE WAS WORKING ON THE ALKALI SPRAY TOWER HOPPER AND CUT HIS RIGHT INDEX FINGER ON SHEET METAL WHILE CUTTING HOLE TO INSERT THEROCOUPLEPROBE.

INJRED STATES HE WAS WORKING ON 1 RAW MILL GIRTH GEAR TRYING TO DRIVE OUT BOLTS WITH A SLEDGEHAMNMER AND HURT HIS BACK.

WHILE USING PIPE WRENCHES TO FREE A JAMMED FEEDER, ONE SLIPPED AND PINCHED HIS FINGER. STITCHES WERE REQUIRED TO CLOSE THE WOUND.

EE STATES WHILE CLEANING OUT PRIMARY CRUSHER A ROCK FELL ON HIS ARM

EE WAS USING A CHOKER CABLE TO LIFT A 35 LB. EMPTY BARREL. THE BARREL SLIPPED FROM THE CABLE AND LANDED ON HIS LEFT FOOT.

EE STATES WHILE USING A HAMMER HE HIT HIS HAND.

EE STATES WHILE USING A BAR TO PUSH MATERIAL DOWN A CHUTE THE BAR SLIPPED & CAUGHT HIS THUMB BETWEEN THE BAR & FRAME OF THE CHUTE.

TRYING TO REMOVE BOLT FROM REED GUN--HIT THE CR ESCENT WRENCH WITH HAMMER, IT BOUNCED OFF BOWL HITTING FINGER.

WHILE REPLACING A WORN LINER PLATE ON A-25 ROCK CHUTE, EMPLOYEE SUSTAINED A SMALL PIECE OF METAL IN THE RIGHT EYE. WAS SEEN BY PHYSICIAN ON JANUARY 31, 1998.

EE WAS USING A SLEDGEHAMMER TO UNPLUG #1 RAW MILL CHUTE. SLEDGEHAMMER HANDLE WAS CRACKED LEAVING A SHARP FIBERGLASS SPINTER EXPOSED. THE SPLINTER LODGED IN HIS RIGHT HAND. DR. WAS UNABLE TOREM OVE ALL OF SPLINTER. FURTHER SURGERY MAY BE REQUIRED IN THE FUTURE.

EE WAS REMOVING OLD CHUTE FROM #1 COAL FEEDO WEIGHT SCREW. THE HOIST HE WAS USING SLIPPED CAUSING THE METAL CHUTE TO HIT HIS LOWER LEFT LEG. INJURY REQUIRED SUTURES. EE WAS GIVEN ANTIBIOTIC S

MILL DEPT UTILITY MAN WAS CLOSING A SLIDE GATE ON HOPPER FEEDER. WHILE USING PIPE WRENCH ON GEARED SHAFT, THE WRENCH SLIPPED OFF AND CAUGHG FINGER BETWEEN WRENCH HANDLE AND SIDE SKIRTING. CAUS ED LACERATION AND CONTUSION. REQUIRED STITCHES.

EE STATES WHILE USING A BAR TO CLEAN OUT #1 CLINKER BY PASS CHUTE A SLIVER OF STEEL BECAME EMBEDDED IN HIS ARM. THE SLIVER HAD TO BE REMOVED BY A PHYSICIAN.

EE WAS CLEANING OUT OVERLOADED BUCKET ELEVATOR USED 3/4 TON LIFTING DEVICE TO RAISE BUCKET TO ACCESS BOTTOM OF ELEVATOR. WHEN ENOUGH MATERIAL WAS REMOVED, ELEVATOR ROLLED BACK. HOOK OF LIFTI NG DEVICE WAS PULLED OUT AND STRUCK EE IN LEFT EYE. EYE WAS SO SEVERLY DAMAGED IT HAD TO BE REMOVED

WHILE EE WAS USING A JACK TO LIFT UP A LARGE GEAR REDUCER, EE CAUGHT LEFT INDEX FINGER UNDER THE LOAD WHEN LETTING IT DOWN. THE WEEIGHT OF THE GEAR REDUCER SMASHED FINGER & WAS TREATED AT HOSPITAL.

EE WAS CLEANING BUILDUP IN THE CRUSHER AND A MUD BALL FELL FROM THE TOP SECTION AND STRUCK HIM ON THE NECK. HE WAS WEARING A HARD HAT, BUT THE IMPACT CAUSED HIM NECK PAIN. HE DID NOT MISS ANY WORK AS A RESULT OF THIS INCIDENT.

EE WAS BENDING OVER TO LOOSEN A BLOT WITH A WRENCH & HE ALLEGEDLY EXPERIENCED PAIN IN HIS BACK MUSCLES. HE HAS A HISTORY OF BACK PROBLEMS. HE DIS GO TO A CHIROPRACTOR FOR TREATMENTS.

EMP WAS GETTING READY TO INSTALL NEW BELT ON #23 BELT LINE AND CUT THE METAL BAND ON BELTING ROLL. IT SNAPPED BACK AND CUT HIM ON RIGHT FOREARM REQUIRING SUTURES. RETURNED TO WORK AFTER MEDICA L TREATMENT WAS RENDERED.

EE STATED HE WAS DRIVING SLIDE GATE ON FEED END OF KC1601 SCREW CONVEYOR TO CUT DOWN FLOW OF MATERIAL. HE WAS USING A SHORT PIECE OF PIPE, MISSED THE END OF SLIDE AND CAUGHT TIP OF LITTLE FING ER OF LEFT HAND ON EDGE OF SLIDE. (4 STITCHES) NO LOST TIME.

EE ALLEGES WHILE TIGHTENING BOLTS ON THE PRIMARYCRUSHER WITH A WRENCH/PIPE EXTENSION HE HURT HIS BACK

EE WAS WORKING ON THE PRIMARY CRUSHER. HE WAS PRYING ON A LOWER GRATE WITH A 1 1/2" X 10' BAR. THE LOWER GRATE MOVED UP CAUSING THE BAR TO HANG IN WORN ARCH OF LOWER GRATE. THE OPPOSITE END OF BAR CAME DOWN PINNING EE S LEFT LEG.

EE WAS USING A BAR TO CHANGE FROM ONE SILO TO ANOTHER WHEN THE BAR SLIPPED AND MASHED HIS LEFT MIDDLE FINGER. AT THE TIME OF TREATMENT THIS WAS CLASSIFIED AS A FIRST AID. BUT LATER THE EE WAS GIVEN A PAIN MEDICATION WHICH MADE IT A REPORTABLE INJURY.

EMP ALLEGES WHILE CHIPPING BUILD UP OFF HANDRAILS WITH A HAMMER, PAIN IN HIS ARM BECAME PROGRESSIVELY MORE SEVERE. DID NOT REPORT INJURY FOR TWOWEEKS.

EE ALLEGES WHILE POSITIONING THE DRUM CLAMP, HIS FINGER WAS CAUGHT BETWEEN THE DRUM AND CLAMP. WOUND REQUIRED STITCHES.

EE WAS TIGHTENING LINER BOLTS ON 5 FINISH MILL WITH 1 IMPACT. ROLL PIN SLIPPED OUT OF SOCKET, CATCHING GLOVE AND PALM OF RIGHT HAND.