Buscar en el registro

Employee was splicing wire when employee cut left finger knuckle with a cable splicer's knife.

Employee struck right hand on drum of tail winch while swinging hammer.

Dredge operator was cleaning roots out of suction line and was closing the cover to the clean-out when a pry bar, employee was using to close the cover, slipped hitting employee in the left eye lid. Injury resulted in stitches only to the eye lid itself.

Pinched little finger on right hand while shoveling out from under the crusher, doctor lanced finger nail to reduce pressure on nail. Employee reported injury to manager after being terminated due to reductions.

HITTING BEARING WITH PUNCH AND HAMMER, PIECE OF BEARING CHIPPED AND EMBEDDED IN HIS BELLY, SENT TO HOSPITAL TO BE REMOVED.

Cut index finger on right hand while cutting a hose on a dragline. Injury took 13 stitches

Lifting a pipe with a chain hoist, chain slipped and the pipe smashed the left ring and middle fingers. Employee had choice to have finger grafted to chest for three months or have amputated at first knuckle, Employee decided to have middle finger amputated at first knuckle.

While cutting a piece of electrical wire, he was pulling the box blade knife upward to cut the wire. His hand and box blade knife slipped, cutting his upper right lip. ( Recieved Stitches Only)

While cutting a piece of conveyor belt, the knife closed itself cutting his right middle finger.

Operator was opening boxes with a razor knife, when a box fell hitting his arm and jabbed the knife into right leg. Operator received stitiches only

Operator was driving wedges in shaker screen with a hammer and missed the wedge and hit his thumb on the side of the shaker. Employee received 4 stitches.

Employee was tightening bolts on bearing housing and rachet broke.

CHISELING ON CONCRETE HIT ARM ON REBAR.

SWINGING HAMMER SIDE WAYS AND BACK STARTED TO HURT

WAS KNOCKING BEARING OFF OF SHAFT WITH HAMMER AND DRIFT BEARING SHATTERED AND A PIECE OF METAL LFLEW IN TO BEND OF ELBOW CUTTING LEFT ARM.

WAS PUTTING HAMMER HANDLE IN A HAMMER. WHEN DRIVING WEDGE INTO HANDLE, MISSED & SMASHED FINGER. WAS TAKEN TO DOCTOR AT FIRST HELP CLINIC. RECEIVED 2 STITCHES & RETURNED TO WORK.

TAKING COME A LONG OFF PONTOON. HAD A ROPE TIED IN CASE DROPPED IT. COME A LONG HAD SLACK IN IT AND SLAPPED IN NOSE AND MOUTH.

EE WAS ON BREAK & WAS PEELING AN APPLE. HE DROPPED HIS APPLE & WHILE GRABBING FOR IT, CUT HIMSELF WITH HIS POCKET KNIFE

MAKING CABLE SLINGS. SPLICING EYE INTO CABLE USING A SCREWDRIVER TO SEPARATE CABLE.. PULLED SCREWDRIVER OUT & PRESSURE FROM CABLE JERKED HIS BACK

PROCESS OF TAKING OIL SAMPLE FROM HAUL TRUCK USING A 1/2" DRIVE BREAKER BAR TO TAKE PLUG OFF. BREAKER BAR BROKE UNDER BIG STRAIN TWISTING WRIST.

WHILE WORKING ON MACK HAUL TRUCK, WRENCH SLIPPED HITTING IN MOUTH CUTTING TOP LIP.

REMOVING 16" PIPELING FROM BEHIND DREDGE. THIS PIPE WAS CURVED AND UNDER STRAIN. CAUSING HOLD DOWN CLAMP TO BREAK-PINNING EMPLOYEES LEG BETWEEN PIEP AND DREDGE HOUSE.

THE WIND BLEW THE DOOR CLOSED ON THE OPERATOR'S CAB. THE DOOR WAS JAMMED AND THE OPERATOR TRYED PRYING THE DOOR OPEN. HIS HAND SLIPPED FROM THE PRYBAR AND HIT THE DOOR JAMMING HIS KNUCKLES.

RUSTED BOLTS- WRENCH SLIPPED.

DRIVING PIN IN LOADED BY USING 12 LB SLEDGE HAMMER. PULLED MUSCEL RIGHT SHOULDER.

TIGHTENING BOLTS ON DREDGE SUCTION, WORKING OVER HAD NAD PULLING ON COMBINATION WRENCH. PULLED OLD HERNIA IN GROIN.

INSTALL STEEL STRAPING MATERIAL ON CABLE FLOTES. HAMMER WAS USED TO BEND OVER BUCKLES. STRUCK LEFT THUMB WITH HAMMER.

EE WAS TIGHTENING BOLT NUTS OVER HIS HEAD. WRENCH SLIPPED OFF NUT & STRUCK HIM ON RIGHT SIDE OF HEAD. SMALL LACERATION TO SCALP.

LETTING PIPE DOWN. PIPE CAUGHT HAND WHEN COME-ALONG SLIPPED.

TAKING OUT SCREWS WITH POCKET KNIFE- LACERATION RIGHT INDEX FINGER.

HELPER WAS KNOCKING METAL CLIPS OFF CLAY CHUTE, ONE FLEW OFF & STRUCK HIM IN MOUTH.

PULLING ON PRYBAR OT BREAK RUNNER FROM PUMP AND PULLED MUSCLE IN RIGHT SHOULDER.

EMPLOYEE WAS TIGHTNING BOLTS WITH 3/4" RATCHET & SHORT LENGTH OF PIPE. WHILE PULLING ON WRENCH HE FEFT SHARP PAIN IN GROIN AREA.

REMOVING NUTS/BOLTS WITH 1/2" RATCHET. WHILE PULLING HANDLE, PULLED MUSCLE.

34302ND FINGER ON RIGHT HAND INSTALLING BEARING FOR SHAKER SCREEN.

79750LIFTED UP WITH COME-A-LONG RELEASED PIPE BY RELESSING COME ALONG AND IT FELL.

CUT R THUMB WHILE PLASTIC PLASTIC

BOLTS IN TRANSMISSION WERE VERY TIGHT.

EMPLOYEE WAS WORKING ON TRUCK ENGINE-A SMALL PARTICLE FELL INTO HIS RIGHT EYE.

STRIKING PUNCH W/ HAMMER HAMMER CHIPPED & PIECE OF METAL LODGED IN HAND.

EMPLOYEE WAS SWINGING SLEDGE HAMMER OVERHEAD AND STRAINED LEFT SHOULDER.

EMPLOYEE WAS STRIKING A PIECE OF METAL. A SMALL FRAGMENT FLEW INTO HIS LEFT EYE.

EE WAS WEARING SAFETY GLASSES WHILE CHIPPING SLAGG A SMALL PIECE FELW INTO HIS LEFT EYE NECESSITATING MEDICAL REMOVAL.

EMPLOYEE WAS TIGHTNING BOLTS WITH 3/4IN SOCKET/RATCHET TOOL SLIPPED OFF NUT CAUSING HIM TO FALL OVER BACKWARDS & LAND ON HIS BACK

STRAINED MUSCLE WHILE TIGHTENING BOLTS ON DREDGE PUMP.

WAS USING A PIECE OF ANGLE IRON AS A STOP FOR PUSHING A LOADER BOSS INTO POSITION.ANGLE WAS NOT WELDED IN PROPER PLACE WHICH LED TO A BROKEN WELD AND THE ANGLE STRUCK MAN IN UPPER FOREHEAD.

EMPLOYEE WAS STRIKING A WRENCH WITH HAMMER WHILE LOOSENING LOCK NUT TO ADJUST BRAKE ON 4600 DRAGLINE AND STRUCK LEFT HAND WITH HAMMER INJURING HAND BETWEEN THUMB AND INDEX FINGER.

I NAME WAS STANDING ON FLAT GROUND VERY STRONG RETAINER RING SNAP PLIERS SLIGHTLY WORN

NORMAL DAY, END OF THE SHIFT, HE WAS TIRED.

MAINTENANCE ON DREDGE BOAT SMALL PARTICLE FLEW IN EYE.