Buscar en el registro

A contractor employee (NBD Industrial Services LLC - MSHA ID # C6519), was installing a wedge into the crusher by using a hammer to drive it in. The hammer head slipped off the wedge, causing EE's left index finger to get caught between the hammer handle and a beam. EE was taken to the ER where EE was treated for a finger fracture and laceration.

The employee was attempting to remove a feed hopper from a crusher. The employee was attempting to break it free by taping it with a hammer. The hopper broke free and sprung up pinching EE's hand between the feeder. The employee obtained lacerations to EE's left index finger and left palm.

Employee was opening a pallet of super bags by cutting the plastic band with EE's pocket knife. When the knife cut through the strap, it then punctured EE's left arm.

while shoveling spillage material from concrete floor felt pain in lower back

while working on truck frame using a 10 pound hammer knocking string loose felt pain in lower right side

While assisting fellow employee trying to hammer out a 3/4" dia. bolt out of slot with 2 lb. hammer, hammer hit left middle finger and broke finger.

He was chasing threads on left jaw die bolt. Thread chaser slipped and right hand hit frame.

CHANGING V BELT USING A COME A LONG TO LIFT MOTOR MOTOR SLIPED FELL ON RIGHT HAND.

EE WAS STANDING ON TOP OF A 6" CHANNEL CONVEYOR USING A 2 LB HAMMER HITTING SIDE OF CHUTE TO DISLODGE FROZEN MATERIAL. HE HAD BEEN DOING THIS FOR APPROX 5 MIN. WHEN HE LOST HIS BALANCE AND FEL L 66" TO CONCRETE FLOOR HITTING HIS HEAD.

SPLICING LONG BALLEST BELT, CUT LEFT HAND WITH BELT KNIFE.

EMPLOYEE ALLEGEDLY INJURED HIS THUMB WHILE CLOSING DOORS ON RAIL CARS. HE WAS USING A BAR TO PRY WITH, THE BAR CAME OUT, EMPLOYEE FELL & LANDED WITH HIS THUMB BETWEEN THE BAR & THE GROUND.

EE ALLEGEDLY INJURED HIS FACE WHEN HE WAS PRYING WITH A SCREWDRIVER WHILE HOOKING UP AIR FILTER DUCK WORK ON A GRADER. THE SCREWDRIVER SLIPPED AND STRUCK HIM IN THE FACE.

EMPLOYEE ALLEGEDLY INJURED HIS FINGER WHEN A KNIFE SLIPPED WHILE HE WAS CUTTING A PIECE OF PIPE

EMPLOYEE ALLEGEDLY INJUR ED HIS RT LEG WHILE CUTTING A PIECE OF BELTIG HIS HAND SLIPPED & THE KNIFE STRUCK HIM IN THE LEG

EE ALLEGEDLY INJURED HIS EYE WHILE REPAIRING WOODEN PALLETS. HE WAS DRIVING A NAIL INTO THE PALLET WHEN A PIECE OF THE NAIL CHIPPED OFF AND STRUCK HIM IN THE EYE.

EMPLOYEE ALLEGEDLY INJURED HIS HAND WHILE HLELPING A MAINTENANCE MAN BY KNOCKING OUT CENTER CUTS FROM A PIECE OF METAL WHEN ANOTHER PIECE OF METAL FELL ON HIS LEFT HAND. THE PICE OF METAL THA T FELL ON HIS HAND WAS APPROX. 18"X24"X3/4" THICK.

EMPLOYEE ALLEGEDLY INJURED HIS BACK WHILE POSITIONING A LARGE PIECE OF METAL(GRIZZLY BARS) WHICH WAS BEING LOWERED BY A HOIST.WHILE LOWERING THE METAL KICKED BACK AND HE HAD THE FULL IMPACT OF THE METAL MOMENTARILY.

FINGER WHILE CLEANING UNDER BELT LINE CAUGHT FINGER BETWEEN WRECKING BAR AND THE METAL BELT STUCTURE

WHILE EE WAS USING A 20 HYDRAULIC JACK TO JACK UP THE LEFT AXLE ON 50 TON EUCLID WHEN THE JACK KICED OUT AND STRUCK HIM IN THE FACE RIGHT EYE AREA. BREAKING HIS PRESCRIPTION SAFETY GLASSES.

WHILE EMPLOYEE WAS TIGHTENING A BOLT HIS WRENCH SLIPPED OFF AND HE FELL FROM A PLATFORM APPROXIMENTLY 10 TO 12 FEET HIGH TO THE GROUND.

THE EMPLOYEE ALLEGEDLY INJURED HIS ARM WHILE LOOSENING BOLTS ON AN AIR COMPRESSOR. THE BOLTS WERE TIGHT AN WHEN IT FINALLY GAVE WAY HE INJURED HIS ARM.

EMPLOYEE ALLEGEDLY INJURED HIS BACK WHILE INSIDE THE CRUSHER USING A HAND SAW TO CLEAR ROCK FROM THE CRUSHER. POSSIBLE PULLED MUSCLE IN LOWER BACK.

WHILE WORKING ON DOZER EMPL CAUGHT HAND BETWEEN 3 TO 1 WRENCH & DOZER.

EMPLOYEE ALLEGEDLY INJURED HIS RT ARM WHILE SWINGING A SLEDGE HAMMER AT AN ELEVATOR BOX HE SAID HE WAS STANDING A FEW FEET AWAY FROM THE BOX WHEN HE SWUNG T HE SLEDGE HAMMER HE MISSED THE BOX

EMPLOYEE SAID HE FELT A SHARP PAIN IN HIS GROIN AREA WHILE TIGHTENING DOWN SCREENS.

EMPLOYEE SAID HE WAS STRUCK IN THE MOUTH BY A PIECE OF WOODEN PALLET. HE WAS PRYING AN OLD PIECE OF WOOD FROM THE PALLET WHEN IT SPLIT AND STRUCK HIM IN THE MOUTH, THUS CHIPPING TEETH.

EMPLOYEE WAS WORKING AT RAIL SIDING. WHEN HE WAS CLIMBING LADDER ON RAILROAD CAR, THE TOP OF LADDER WAS OBSTRUCTED BY A BELT LINE. HE TRIED TO GO AROUND THE BELT LINE BY PULLING HIMSELF UP WIT H THE SAFETY RAIL ON THE CONVEYOR LINE WHEN THE BAR BROKE.

EMPLOYEE WAS WO9KING AT THE MILL BUILDING USING A FOUR POUND HAMMER,WHEN HE ACCIDENTLY HIT HIS LEFT THUMB.

EMP WAS WORKING3ON THE SECONDARY PLANT DIGGING OOUT THE BLOCKED OFF CRUSHER WITH A BAR. HE WAS HITTING THE BAR WITH A HAMMER WHEN IT CHIPPED THUS HITTING LEFT HAND

EMPLOYEE WAS WO9KING AT RAIL SIDING LOADING RAIL CARS. WHILE USING A COME-ALONG TO SHUT DOOR ON RAIL CAR, THE HOOK BROKE CAUSING COME-ALONG TO HIT HIS RIGHT LEG.

EMPLOYEE WAS TR2ING TO PUNCH A ROCK OUT OF THE SCREEN P LANT IN THE MILL BUILDING WITH A ROD WHEN HE HURT HIS LEFT SHOULDER