Buscar en el registro

EE was holding avocado in hand and cutting it - knife slipped and cut hand at base of index finger, left hand.

Employee was cutting a piece of flex hose with a Stanley knife. It slipped cutting his left index finger. (required 4 stitches)

Employee was lowering airlock to the floor with a come a long. The weight of the airlock was alot and his hand came up and hit his glasses while holding the handle.

Employee states that while cutting a piece of duct tape with a utility knife, the knife slipped and cut his right ring finger.

Employee states his finger was pinched between a large wrench and the exposed threads of the wedge bolt. The large wrench was being struck with a sledgehammer to loosen the nut when his finger slipped into the pinch zone.

Employee was changing bags in the dust collectors and the repetitive motion of using a screwdriver and ratchet may have caused the swelling. Note: Lost time began 8/26/05.

EMPLOYEE STATES THAT BELT 001 WAS FROZEN TO TAIL PULLEY AND ROLLS AND THAT HE WAS PRYING BELT LOOSE WHEN HE STRAINED HIS BACK.

WHILE EE WAS OPENING A PALLET OF BAGS WITH A UTILITY KNIFE, THE KNIFE SLIPPED AND CUT THE INSIDEOF HIS LEFT FOREARM.

WHILE EE WAS CUTTING UP CARDBOARD BOXES WITH A STANLEY KNIFE HIS HAND SLIPPED AND THE KNIFE WENT INTO HIS LEFT THIGH.

EMPLOYEE WAS SWINGING A SLEDGE HAMMER TRYING TO BREAK A LARGE ROCK IN THE JAW CRUSHER HOPPER AND MISSED HITTING HIS ELBOW ON THE SIDE OF THE HOPPER.

EMPLOYEE HURT HIS LEFT WRIST CLEANING FROZEN MATERIAL OFF OF THE PAN FEEDER. HE WORKED UNTIL 1-17-91 THEN WENT TO THE DOCTORS AND THE DOCTOR TOLD HIM TO TAKE A FEW DAYS OFF.

EMPLOYEE WAS SLAGGING A PIECE OF STEEL AND A PIECE OF SLAG GOT IN HIS RIGHT EYE.

EMPLOYEE WAS USING A BEARING PULLER TO PULL A BEARING & WHEN HE BENT OVER HE PULLED A MUSCLE IN HIS BACK

EMPLOYEE WAS PUTTING A SHAFT IN A TAIL PULLEY, WHILE HE WAS KNEELING DOWN TIGHTENING A NUT ON A BEARING HE FELT A PAIN IN HIS LOWER BACK.

THE TRACK SLIPPED OFF THE DRILL AND WAS ATTEMTPING TO REPLACE IT ABCK ON THE DRILL.TRACK WAS PINCHED SO I HIT IT WITH A SLEDGE AHAMMER TO LOOSEN IT.WHEN I HIT IT A PICE OF STEEL EMBEDDED ITSEL F INTO MY UPPER LEFT THIGH.

EMPL WAS MAKING BAG OPENER. WHILE SHARPENING ONE EDGE OF PIECE OF ANGLE HE DROPPED HIS FILE. WHEN HE BENT DOWN TO PICK IT UP HE HIT BACK OF HIS FINGER ON EDGE OF ANGLE.

WAS LOOSENING A NUT ON A LANGER. WRENCH SLIPPED AND THE BACK OF HIS RIGHT HAND STRUCK THE NUT AND CUT IT.

EMPL WAS TIGHTENING NUTS ON FLANGE & WRENCH SLIPPED HITTING HIM IN MOUTH.

EMPLOYEE WAS SCRAPING THE SIDE OF 13 ELEVATOR WITH A PIECE OF ANGLE IRON. THE ANGLE WENT THROUGH A HOLE IN THE ELEVATOR CAUGHT ON A BUCKET AND THE BUCKET THREW THE PIECE OF ANGLE BACK STRIKING HIM ABOVE THE RIGHT EYE.

EMPL BANGING ON3 PIPE WITH HAMMER AND TURNED HIS WRIST.

OPENING RAIL CA9 DOOR WITH PRY BAR AND BAR SLIPPED STRIKING EMPL ON MIDDLE FINGER OF RIGHT HAND.

TIGHTENING A NU7 ON A CRUSHER HURT HIS KNUCKLE.

PULLED STRAINED3MUSCLE IN BACK WHILE CRANKING UP THE LEGS IN A TRAILER.

PRY BAR SLIPPED AND HIT EMPL ON SIDE OF HEAD.SMALL CUT ON SIDE OF HEAD.2 STITCHES USED TO CLOSE CUT.

EMPLOYEE WAS CUTTING P-IECE OF BELT FOR CONVEYOR HIS KNIFE SLIPPED CUTTING LEFT INDEX FINGER CUT REQUIRED 5 STITCHES

EE WAS TRYING TO DISLODGE PIECE OF ORE IN CRUSHER USING A PRY BAR, BAR SLIPPED & STRUCK HIM IN THUMB. EE\S WERE NOTIFIED PRIOR TO INCIDENT NOT TO USE THIS METHOPD TO DISLODGE ORE IN CRUSHER.