Employee was using a hammer to remove an old bearing from a crusher shaft. A sliver of steel broke off and entered the employee's leg. An x-ray showed the metal inside employee's leg, doctors opted not to remove it at this time.
The employee was asked to help pull down on a pry bar positioned overhead. The pry bar slipped and struck the employee in the head. Employee was not wearing hard hat.
25 de enero de 2024NY · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was removing the rear panel from a screen, lowering it with a chain come-along. The panel rotated and pinned the employee's leg against a nearby pipe.
24 de agosto de 2017NY · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was using a utility knife to cut conveyor belting. The knife slipped and cut the employee's finger. Surgical glue was required to close the wound.
27 de enero de 2015NY · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
On 8/27/12 the employee was cut on his elbow when the nut he was trying to loosen broke free & his arm hit the frame of a machine. He received 1st aid & returned to work. On 8/28/12, while using a wrench to turn a thread-tapper & compensating for the pain in his elbow, the wrench slipped, glanced off his safety glasses & struck him in the forehead, causing another laceration.
27 de julio de 2012NY · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Two employees were shoveling trash into the back of a garbage truck. One employee lifted his shovel as the other was leaning down and struck him in the forehead with the shovel.
Employee was attaching a chain to a piece of equipment, preparing to move it. He pinched his thumb between a pulley and the lifting chain.
30 de abril de 2003NY · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
EMPLOYEE WAS SWINING A 10-16 LB SLEDGEHAMMER IN A BENT OVER POSITION WHILE HELPING TO CHANGE A BEARING ON THE WASH PLANT.
19 de septiembre de 1998NY · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
9 de agosto de 1995NY · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
13 de julio de 1994NY · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
EMPLOYEE WAS DISASSEMBLING A HYDRAULIC CYLINDER AND WORKING NEAR ANOTHER EMPLOYEE WHO WAS HAMMERING ON A STEEL TRUCK FRAM. THE NOIS OF THE HAMMERING APPARENTLY CAUSED NERVE DAMAGE TO THE FIRST EMPLOYEE'S RIGHT EAR.
14 de agosto de 1991NY · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
9 de abril de 1990NY · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
12 de noviembre de 1987NY · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)