Buscar en el registro

While cleaning chute to sand bin, employee positioned himself wrong and felt his back pop.

Employee was removing a conveyor splice joiner pin with vice grips and a hammer. The hammer glanced off the vice grips and struck the top half of his left index finger causing a contusion of the left hand.

Cleaning tracks on D-10 dozer with a bar. The bar slipped and hit the dozer frame and then hit the mechanics right hand resulting in a closed fracture of the navicular bone of wrist.

E/E was removing bolts from under a cement cooler, as employee pulled on a 3/4 ratchet he felt a pull in his (R) Shoulder

Tightening a bolt when the wrench slipped off striking the face.

EE was dispatched to unplug a feed chute. After clearing the obstruction, he turned to manually run the machinery and he felt a pop in his left knee.

WHEN CLEANING FEED CHUTE OF MATERIAL BUILD-UP, A CHUNK FELL AND HIT WRIST. EMPLOYEE DID NOT REQUEST MEDICAL ATTENTION UNTIL 1/2/04.

THE EE WAS HITTING A HOPPER IN ORDER TO EMPTY IT OUT. WHEN HE HIT THE HOPPER THE LAST TIME THE HAMMER GOT CAUGHT BETWEEN THE PACKER HOPPER AND A LIMIT SWITCH SUPPORT ROD. AS A RESULT HE TWISTE D HIS ARM.

EMPLOYEE WAS HOLDING A HAMMER WRENCH BEING STRUCK BY ANOTHER EMLOYEE. WHEN THE OTHER EMPLOYEE WAS SWINGING THE HAMMER HE HIT A BOLT, WHICH THE HAMMER BOUNCED OFF OF AND INTO THE HAND OF THE EMPLOYEE.

A MOBIL EQUIPMENT MECHANIC WAS STRIKING AND END BIT ON A BULLDOZER WITH A HAMMER IN ORDER TO SEAT IT INTO POSITION. A PIECE OF THE BIT CHIPPED OFF AND FLEW INTO THE OPERATOR'S KNEE.

EE STATES THAT HE WAS USING A UTILITY KNIFE TO CUT SOME AIRSLIDE FABRIC, WHEN THE KNIFE SLIPPED & CUT HIM ON THE RIGHT THIGH.

EE STATES THAT HE WAS USING A WRENCH TO TIGHTEN BOLTS ON A PIECE OF EQUIPMENT, WHEN THE WRENCH ACCIDENTALLY SLIPPED CAUSING HIM TO STRIKE METAL HOUSING WITH THE LEFT WRIST.

EMPLOYEE STATES THAT HE WAS USING A COME-ALONG HOIST TO POSITION CHAIN LINKS ON THE CHALK RECLAIMER BOOM WHEN HE FELT A PAIN IN THE RIGHT WRIST. HE WAS SENT TO THE DR. ON 3-21-96 AFTER COMPLAI NING OF SWELLING AND PAIN.

EMPLOYEE STATES THAT HE WAS USING A BOX CUTTER TO OPEN A PARTS BOX, WHEN HIS HAND SLIPPED, CUTTING HIS LEFT HAND.

EMPLOYEE WAS HELPING UNPLUG THE FIRST STAGE CYCLONE WHEN HE WAS ACCIDENTLY SPLASHED BY HOT AMBIENT DUST, CAUSING AN ALKALI BURN TO THE RIGHT EAR. HE WENT TO DR. ON 11-2-95.

EMP WAS HELPING TO UNPLUG THE FIRST STAGE CYCLONE OF THE PREHEAT TOWER WHEN HE WAS ACCIDENTALLY SPLASHED WITH HOT DUST, CAUSING MINOR BURNS TO THE UPPER CHEST AND NECK.

EMPLOYEE WAS USING A COME-A-LONG CHAIN HOIST WHEN HE FELT A SHARP PAIN IN THE RT HAND DUE TO THE COM-A-LONG BECOMING BOUND UP & HE WAS APPLYING SOME PRESSURE

EE WAS USING A HYDRAULIC POWER PULL TO REMOVE A REDUCER SHAFT, WHEN A BOLT FASTENER BROKE, CAUSING THE BRACKET TO BOLT FREE UNDER PRESSURE AND STRIKING HIM ON THE LEFT HIP.

EE WAS USING A SLEDGE HAMMER TO DRIVE IN THE RETAINER PIN ON RIPPER TOOTH WHEN HE FELT A SHARP PIECE OF METAL GO INTO THE LEFT HAND, CAUSING A LACERATION.

EE WAS OVERHAULING THE RAW MILL ROLLER AND WAS USING A LARGE WRENCH TO TORQUE TO SEAL HOSUING WHEN HE FELT PAIN ON THE RIGHT WRIST CAUSING A SWELLING OF THE WRIST.

INJURED WAS TIGHTENING BOLTS ON THE COAL MILL HOOK PLATE USING A HAMMER AND STRUCK HIS RIGHT FOURTH FINGER.

EMPL USING A UTILITY KNIFE TO OPEN A PLASTIC CONTAINER WHEN HAND SLIPPED CUTTING EMPL ON LEFT HAND.

EMPLOYEE WAS INT HE PROCESS OF REINSTALLING A FINISH MILL COMPARTMENT DOOR. THE DOOR BECAME JAMMED AND UPON FREEING THE DOOR IT CAUGHT THE SECOND FINGER OF THE LEFT HAND BETWEEN THE DOOR AND THE MILL HOUSING DOOR, CUASING A FRACTURE.

EMPLOYEE WAS USING A PRY BAR TO POSITION A WATER BLASTER AT THE KILN INLET PLATFORM AND STARTED EXPERIENCING SOME BACK PAIN LATER DURING HIS SHIFT. HE WAS SENT TO THE LIVE OAK CLINIC AFTER PAI N IN THE LOWER BACK WORSENED.

INJURED EMPLOYEE ALLEGES HE WAS USING A LARGE PIPE WRENCH MOST OF HIS SHIFT WHILE PERFORMING WORK AT THE CHALK STONE RECLAIMER HE WENT TO THE VILLAGE OAKS ER ROOM ON 03-16-91 AFTER EXPERIENCI NG SOME PAIN IN THE RT SHOULDER AREA

EMPLOYEE EXPERIENCED A TINGLING/NUMBING SENSATION IN LEFT HAND AFTER HAVING USED A SMALL CHIPPING HAMMER AT THE FINISH MILL FEED SILOS HE WAS SENT TO CO. DOC FOR TREATMENT & EVALUATION ON 03-2

INJ USING PRYBAR TO UNJAM SHUTTLE BELT CONVEYOR WHEEL WHEN PRY BAR SLIPPED CRUSHING LEFT 5TH FINGER BETWEEN PRY BAR AND HANDRAIL.TAKEN TO EMERG RM FOR EVAL & TREATMENT.

INJURED WAS HELPING TIGHTEN BOLTS ON THE RAW MILL SEAL AIR FAN DUCT WHEN HE FELT A SLIGHT PAIN IN HIS GROIN HE WENT TO SEE A DR AFTER WORK WHEN THE PAIN WORSENED

HELPING ALIGN MOTOR USING PINCH BAR TO ALIGN BOLT HOLES BAR SLIPPED AND STRUCK ON FACE CAUSIG SM LACERATION.

INJURED WAS U SING A POKING ROD TO CLEAR A MATERIAL PLUG ON MAIN CONDITIONING TOWER BOTTOM WHEN MATERIAL BROKE LOOSE AND INJURED WAS SPLASHED WITH HOT DUST, SOME LODGING IN HIS WORK GLOVE WHIC H CAUSED SECOND DEGREE BURNS ON HIS LEFT WRIST.

INJURED WAS USING A LONG HANDLED WRENCH TO TIGHTEN KILN GIRTH GEAR BOLTS WHEN HE FELT SHARP PAIN IN RIGHT HIP.

INJURED WAS USING A PIPE WRENCH TO TURN A SHAFT, WHEN THE WRENCH ACCIDENTLY SLIPPED, CATCHING HIS LEFT LITTLE FINGER BETWEEN THE WRENCH AND A METAL FRAME, CAUSING A LACERATION.

INJURED WAS WATCHING FELLOW WORKER DRIVE STEEL RODS IN BALL MILL BARRELS USING A #K SLEDGE HAMMER THE HEAD OF THE HAMMER ACCIDENTALLY BROKE OFF THE HANDLE AND STRUCK MR. ALCOSER ON LEFT LEG BE LOW THE KNEE

INJURED WAS CLEANING OUT A PLUGGED ROTARY DISCHARGE VALVE USING THE HANDLE OF THE HAMMER. HE STARTTED THE ROTARY FOR TESTING, BUT NOTICED HAMMER WAS IN THE ROTARY CASING AND AS HE GRABBED FOR THE HANDLE THE ROTARY HAD SNAGGED THE HAMMER AND PINCHED THE FOURTH FINGER OF THE RIGHT HAND BETWEEN THE HANDLE AND THE BASE OF THE ROTARY CAUSING A LACERATION.

INJURED WAS USI3G HAND SHOVEL TO REMOVE WET GYPSUM MATERIAL FROM END DUMP INTO HOPPER. WHEN HE ACCIDENTLY CUT RT MIDDLE FINGER ON SHARP EDGE OF END DUMP. WAS NOT WEARING WORK GLOVES.

INJURED WAS USI3G A POCKET KNIFE TO STRIP MOTOR LEADS FROM #3 COOLER FAN,WHEN THE KNIFE SLIPPED AND CUT HIS LEFT INDEX FINGER TIP.

INJURED WAS USI3G ROPE TO HOIST DUCTWORK FOR COAL SYSTEM WHEN THE ROPE BROKE, CAUSING HIM TO LOSE HIS BALANCE AND FELL BACK, STRICKING HIS LEFT ELOW ON FLOOR.

INJURED WAS HEL1ING TO LOWER A CLINKER COOLER CARRIAGE WHEEL ASSEMBLY APPROX. 9 FT TO GROUND LEVEL. WHILE USING A COME A LONE TO LOWER THE CARRIAGE, IT BECAME HUNG ON SMALL PLATFORM. INJURED W AS PULLING ON C2M A LONG HOOK TO FREE CARRIAGE AND WHILE DOING SO CAUGHT HIS LEFT INDEX FINGER BETWEEN THE CARRIAGE HOUSING AND THE COME A LONG HOOK.

AS EMPLOYEE WAS3ATTEMPTING TO ADJUST THE SETTING OF THE RAW MILL CLASSIFIER WITH A STEEL COVER BAR, THE BAR SLIPPED SMASHING AGAINST HIS RIGHT HAND

A MOTOR WAS BEI3G LIFTED WITH A CHAIN FALL THE CHAIN FALL HOOK SLIPPED DROPPED MOTOR & HIT I.NAME KNOCKING HIM DOWN.

EMPLOYEE WAS KN2CKING IN GRIZZLY BARS WITH HAMMER WHEN HE HIT HIS LEFT INDEX FINGER.AFTER WAITING A FEW DAYS,EMPLOYEE SUSPECTED HE HAD AN INFECTION AND WENT TO DOCTOR.

WIRE WAS BEING PULLED WITH ROPE ROPE PULLED LOOSE AND LASHED OUT ROPE BURNEDD RIGHT ARM AND LOWER BACK

HITTING KEY WAY WITH HAMMER AND CHISEL TO REMOVE SAME PART OF HAMMER BROKE AND HIT RIGHT FOREARM AND RIGHT THIGH.

EE WAS WORKING ON #3 CEMENT ELEVATOR ON A SPROCKET. IT HAD SLIPPED OUT & THEY WERE TRYING TO PUT IT BACK IN. SLEDGE HAMMER HIT THE EDGE OF PUNCH & HIT RAUL ON FINGER.

EMPLOYEE WAS STRIPPING INSULATION FROM A BURNED OUT MOTOR. THE STRIPPING KNIFE SLIPPED LACERATING THE LEFT FOREARM.

BUILDING FORMS 7HE INJURED EMPLOYEE HIT LEFT MIDDLE FINGER AT THE EDGE OF THIS FINGER NAIL AND TORE A PIECE OF SKIN AWAY.

EMPLOYEE WAS CLEANING SOME CEMENT OUT OF SOME DUST FILTERS IN THE NO.8 MILL DUST COLLECTOR USING A BROOM HANDLE TO POKE THE BAGS FROM THE BOTTOM UPWARDS SOME DUST PARTICLES FLYYING IN THE IMME DIATE AREA GOT INTO HIS EYE CAUSING AN IRRITATION AND EVENTUAL CORNIAL ABRASION

BUILDING FORMS ON A VERTICAL WALL HAD SAFETY LANDYARD WRAPPED AROUND A STIFF BACK THE LANYARD & SLIPPED AND THE INJURED FELL APPROX 7 FEET

EMPL SUFFERED LACERATION ON RIGHT IDEX FINGER USING HAND HACKSAW TO CUT THROUGH 1-1/4\\ BOLT.AT FINISH OF LAST STROKE,RIGHT HAND SLIPPED CAUSING HAND TO HIT JAGGED PART OF BOLT IN VISE.

INSTALLING FORM WORK ' THE FNISH MILL BLDG. MILL PIER WAS HAMMERING WHEN HE HIT THE LEFT THUMB INSTEAD OF THE HEAD OF THE NAIL.