Buscar en el registro

EMPLOYEE WAS REMOVING A HANG UP FROM THE PRIMARY JAW CRUSHER USING A ROCK WEDGE. THE WEDGE KICKED BACK DRIVING THE WEDGE HANDLE INTO THE OPERATOR'S CHIN CAUSING A LACERATION REQUIRING MEDICAL ATTENTION.

EE WAS SITTING ON A STEEL PLATE SECURED BY A CHAIN HOIST. THE HOIST SLIPPED, CAUSING HIM TO FALLDOWN INTO A CHUTE. HE RECEIVED 2 STITCHES IN HISRIGHT KNEE.

EMPLOYEE WAS ATTEMPTING TO CLEAN A SCREEN THAT HAD BLINDED OVER WITH A CHIPPING HAMMER. WHILE DOING SO THE EMPLOYEE SLID HIS SAFETY GLASSES TO THE LOWER BRIM OF HIS NOSE, CONTINUING TO CLEAR THE SCREEN THE HAMMER THE EMPLOYEE WAS USING STRUCK SOME MATERIAL THAT FLEW UP AND STRUCK THE EMPLOYEE IN THE EYE.

EE WAS ATTEMPTING TO REPAIR A SET OF JUMPER CABLES WITH A RAZOR KNIFE, WHILE DOING SO THE KNIF SLIPPED CAUSING A LACERATION TO THE EE'S LEFT PALM. (STITCHES WERE REQUIRED)

EE WAS ATTEMPTING TO UNJAM A ROCK IN THE ROCK BOX USING A PRY BAR.. WHILE ATTEMPTING TO DO THIS THE ROCK FELL THRU INJURING EE'S RIGHT ARM & ELBOW

EMPLOYEE WAS REPAIRING A HYDRAULIC LINE ON A PIECE OF HEAVY MACHINERY. HE USED A BOX KNIFE RAZOR BLADE ON A PIECE OF RUBBER HOSE, SLIPPED, AND CUT FINGER.

EE WAS ATTEMPTING TO PRY A LARGE STONE WHEN THE STONE SHIFTED & SMASHED HIS RIGHT THUMB

EE WAS CUTTING A PIECE OF RUBBER WHEN THE RAZOR KNIFE HE WAS USING SLIPPED & CUT HIS KNEE

EMPLOYEE WAS ADJUSTING A CRUSHER USING A CHAIN HOIST. HE PUT TO MUCH PRESSURE ON THE HOIST, CAUSING THE CHAIN TO BREAK. WHEN THE CHAIN BROKE, ITMADE A LACERATION ON EMPLOYEE'S RIGHT LEG.

EE WAS HOLDING A WRENCH ON A HOSE FITTING WHILE EE LOOSENED IT. THE WRENCH BROKE FREE & EE LOST HIS BALANCE. WHILE TRYING TO REGAIN HIS BALANCE, HE RAISED HIS ARMS & STRUCK COWORKER IN THE LIP .

EMPLOYEE WAS HELPING TO REMOVE THE LOCKING NUT FROM THE TERTIORY CRUSHER. WHILE ATTEMPTING TO SWING A RAM INTO THE NUT, EMPLOYEE GOT HIS FINGER BETWEEN THE RAM AND THE NUT AND SMASHED THE MIDD LE FINGER.

EE WAS REMOVING SINK STOPPER USING POCKET KNIFE AS A SCREWDRIVER. BLADE FOLDED AND CUT INDEX FINGER.

USING PRY BAR TO LOOSEN BRIDGED MATERIAL. ROCK STRUCK RIGHT HAND AND CUT.

EE HAD REMOVED TRAMP METAL FROM CRUSHER. CRUSHER WAS HELD OPEN WITH METAL WEDGE. STRUCK WEDGE WITH HAMMER. WEDGE STRUCK EMPLOYEE ON RIGHT LEG AT SHIN.

REPAIRING CONVEYOR BELT. BELT CLAMP BROKE STRIKING ON RIGHT THIGH, JUST ABOVE KNEE.

EMPLOYEE WAS CHANGING BEARINGS-USED TORCH TO CUT RACE FROM SHAFT. HIT RACE WITH HAMMER AND METAL PARTICLE CUT KNEE REQUIRING STITCHES.

EE WAS DRIVING A PIN OUT OF A DIFFERENTIAL WITH A 6 FT PIPE. WHEN PIN CAME OUT, DIFFERENTIAL FELL ON LOWER PART OF RT ARM. THIS BROKE WRIST IN 2 PLACES.

EE WAS IN AREA WHERE TWO OTHER EE WERE USING A SLEDGE HAMMER TO REMOVE A BUSHIND FROM A SHAFT A FRABMENT BROKE OFF THE BUSHING AND TRAVELLED 10-15 FEET STRIKING EE IN THE MOUTH. REQUIRING STIT CHES AND LOSS OF A TOOTH.

REPAIR WORK ON 7' CONE CRUSHER. HE WAS HOLDING BAR FOR A CO-WORKER WHO WAS USING A SLEDGE HAMMER TO LOOSEN SHAFT ON CRUSHER. HAMMER GLANCED OFF AND HIT HIM ON THE EYE BROW. SAFETY GLASSES CAUS ED LACERATION ABOVE EYE REQUIRING 3 STITCHES.

EE WAS USING A SLUGGING WRENCH TO LOOSE BOLTS ON THE PRIMARY CRUSHER-MISSED WRENCH AND HIT HISHAND WITH HAMMER.

EE WAS USING HAND OPERATED HYDRAULIC PUMP TO UNLOCK TELSMITH 665 CRUSHER. WOULD NOT UNLOCK. EE USED OPEN END WRENCH TO REMOVE FITTING AND FAILED TO RELEASE PRESSURE FROM CRUSHER. FITTING WAS U NDER 8-10,00 LBS. PSI AND STRUCK EE ON RIGHT CHEEK SEVERELY INJURING RIGHT EYE.

EE TIGHTENING BOLTS WITH WRENCH AND STRAINED RIGHT WRIST.

USING 3 TON COMEALONG TO LIFT FEEDER TO PRIMARY CRUSHER--CHAIN BROKE AND STRUCK EE IN RIBS.

WRIST STRAIN - PULLING RATCHET WRENCH TO TIGHTEN BOLTS.

EE WAS USING A PRY BAR TO MOVE AN ELECTRIC MOTOR. THE PRY BAR SLIPPED & THE EE'S FINGER WAS CAUGHT BETWEEN HANDRAIL & THE BAR.

EMPLOYEE WAS ATTEMPTING TO BREAK AN OVERSIZED ROCK THAT WAS HUNG UP IN THE PRIMARY CRUSHER. THE EMPLOYEE STRUCK THE ROCK WITH A SLEDGE HAMMER AND A PIECE BROKE OFF AND STRUCK THE EMPLOYEE.

EMPLOYEE WAS USING A PRY BAR TO CLEAR ROCK LODGED IN A CHUTE. THE BAR WAS STRUCK BY A LARGE ROCK & IT HIT THE EMPLOYEE.

EMPLOYEE WAS PULLING ON WRENCH & STRAINED NECK MUSCLES.

EMPL WAS CHANGING DRIV E SHAFT ON HAULAGE TRUCK. WRENCH SLIPPED & EMPL CUT HAND ON BURR ON DRIVE SHAFT.

EMPLOYEE WAS USING A WRENCH TO REMOVE NUTS HOLDING A HYDRAULIC CYLINDER IN PLACE. THE WRENCH SLIPPED AND CUT HIS FOREHEAD. 4 SUTURES WERE NEEDED TO CLOSE THE WOUND.

EMPLOYEE WAS CUTTING A CONVEYOR BELT WITH A RAZOR KNIFE.THE KNIFE SLIPPED AND CUT EMPLOYEES THUMB.SUTURES WERE APPLIED.

EMPL HOLDING CARRIAGE BOLT WITH HAND WHILE IT WAS BEING TIGHTENED.EMPL HAND SLIPPED,BOLT THREADS CUT LEFT FINGER.REQ 6 STITCHES TO CLOSE WOUND.

EMPL WAS USING UTILITY KNIFE TO CUT SOME RUBBER BRELTING. KNIFE SLIPPED & CUT LEFT THUMB. THUMB WAS STITCHED.

EMPL KNOCKING DIRT OUT OF HOPPER.STICK GOT JAMMED AND PUSHED LEFT HAND AGAINST HOPPER WALL.BROKE THUMB AND CUT IT.

EMPL WAS CLEANING OUT ROCK CHUTE. ROCK ON SCREEN ABOVE CHUTE FELL & STRUCK EMPL ON RIGHT CALF. HE SUFFERED CONTUSION & WAS GIVEN MEDICATION.

WRENCH SLIPPED HIT ELBOW ON MANIFOLD