Buscar en el registro

While tightning 2" bolts on a top plate of the primary crusher using a 24" pipe wrench and a 10 lb. hammer employee strained his lower back. Employee was in a bent over position while performing the work.

Breaking up chunks of cement with hammer-felt a sharp sting in left shoulder

ALLEGEDLY WHILE OPENING SLIDE GATE FOR SILO #91, EMPLOYEE WAS USING A 4' PIPE WRENCH. SHE FELT A PULL IN HER SHOULDER AND BACK AREA.

EE WAS TAKING COVERS OFF AIR SLIDE SEPARATOR. BOLTS WERE OUT. WHILE PRYIG ON IT TO LOOSEN RTV IT FELLOFF TO THE SIDE & THEN FELL & SMASHED THE BACK OF EE'S LEFT FOOT.

ALLEGEDLY, WHILE PULLING A TROLLEY WHEEL OVER A RAILING WITH A CHAIN FALL THE EMPLOYEE FELT A STRAIN TO HIS GROIN.

WHILE THE EMPLOYEE WAS ATTEMPTING TO FREE A JAMMED SCREEN, THE SCREEN SLIPPED WHICH CAUSED A LACERATION TO HIS THUMB WHICH REQUIRED STITCHES.

EE WAS USING BAR PUSHING UP BELT, FELT SHARP PAIN IN BACK.

PUSHING ON WRENCH, CHANGING SWEEPER BAGS.

ALLEGEDLY WHILE CLEANING BETWEEN ROLLERS ON 2R8 BELT, WITH A SHORT HANDLE HOE THE HOE GOT CAUGHT BY THE BELT AND PULLED HIS HAND BETWEEN THE BELT AND A ROLLER.

ALLEGEDLY WHILE TRYING TO LOOSEN A BOLT ON A FLANGE, EE FELT A "POP" AND THEN PAIN IN THE MIDDLE OF HIS BACK.

ALLEGEDLY WHILE SWINGING SLEDGEHAMMER VICTIM MISSED SLUGGING WRENCH AND ARM WAS OVEREXTENDED ANDFELT POP IN RIGHT ELBOW.

WORKING ON KB32-1 SCREW, TURNING SCREW WITH A PIPE WRENCH EE FELT SHARP PAIN IN RIGHT SHOULDER

EE WAS JACKING A RAILCAR. THE CAR MOVED BACKWARDS CAUSING THE JACK TO FLY UP AND HIT EE IN THE JAW

EMP WAS REPLACING TOOTH ON 992 BUCKET. WHILE DRIVING TOOTH ON WITH A SLEDGE HAMMER, A PIECE OF METAL FRACTURED OFF OF TOOTHE AND PENETRATED EMPS SKIN AT NECK.

ACCIDENT ALLEGEDLY OCCURRED ON 11-29-96 AND MEDICAL HELP AND LOST TIME DIDN'T START UNTIL 3-24-97. ALLEGEDLY, WHILE HELPING SHIFT REPAIRMAN LOADTHE BACK OF THE REPAIR TRUCK, A CHAIN WRENCH WIT H A 4' HANDLE SLID OFF THE BED OF TRUCK STRIKINGVICTIM IN KNEE.

WORKING IN TELEDYNE HAMMER AND HIS FINGER GOT PINCHED BETWEEN FRAME AND SLEDGEHAMMER.

SHOVELING SPILLED MATERIAL. EMPLOYEE STRUCK OBJECT IN PILE WITH SHOVEL. EMPLOYEE SLIPPED FROM OVEREXERTION CAUSING PAIN IN GROIN AREA.

ALLEGEDLY, WHILE LOWERING THE CHAIN COME-A-LONG DOWN THE DOOR FOR THEH PRIMARY AIR FAN, WHICH WAS LEANING NEXT TO THE PRIMARY AIR FAN FELL OVER STRIKING THE VICTIM ON THE RIGHT FOOT.

EMPLOYEE WAS PROPPING SHAKES IN THE STONE TUNNELS. A COME-A-LONG WAS BEING USED TO PROP THE SHACKERS. THE COME-A-LONG BROKE LOOSE AND THE HOOK HIT THE EMPLOYEE IN THE MOUTH.

ALLEGEDLY WHILE TIGHTENING AN 7/8" BOLT AND NUT ON THE TRIPPER, THE BOLT BROKE AND THE VICTIM FELL BACKWARDS ONTO THE FRAME AND THEN THE RAIL.

ALLEDGELY, WHILE SWINGING A 20 LB. SLEDGE HAMMER, WHILE KNOCKING A MILL DOOR IN, WICTIM FELT PAIN IN RIGHT SHOULDER.

EMPLOYEE WAS TRANSFERING CEMENT FROM PACKING SILO TO BULK SILO. HE WAS PUNCHING CHUNK'S OUT OF CHUTE WITH ROD THRU PORTHOLE AND LOOSE CHUNKS HIT HIM IN THE EYES.

ALLEGEDLY, WHILE USING A 4' PIPE WRENCH TO OPEN SILO #92, VICTIM FELT AND HEARD SOMETHING POP IN HIS WRIST.

WHILE TIGHTENING A CHAIN COME-A-LONG TAHE LUG WHICH WAS BEING PULLED BROKE LOOSE, THE CHAIN FLEWBACK & HIT HIM ON THE CHEEK, MAKING A CUT WHICH WAS CLEANED & BAND AID APPLIED.

BACK PAIN, PULLED MUSCLE IN BACK & SHOULDER WHILE USING SLEDGE HAMMER.

WORKING ON A GEAR LUBRICATION SYSTEM, USING HAND TOOLS TO REMOVE AN IDLER, WHILE WORKING HE LOOKED UP & GRASE DROPPED IN HIS EYY, BETWEEN SAFETY GLASSES.

INJURED USING PLIERS TO PULL ON TY-RAP TO BIND WIRES TOGHETHER-PLIERS SLIPPED AND STRUCK EMPLOYEE ABOVE EYE. SELF INFLICTED SUTURES REQUIRED.

EMPLOYEEW AS REMOVING PROCESS DOOR ON RAW MILL WITH DOOR ON TOP OF MILL. DOOR LIFTING DOOR BY CROW'S FOOT BAR WHEN THE DOOR FELL THROUGH THE OPENING. THE EMPLOYEE'S HANDS WERE CAUGHT BETWEEN T HE CROW'S FOOT BAR AND THE MILL SHELL./ CABLEWAS TOO SLACK.

INJ & ANOTHER WERE USING METAL SHAFT TO HIT TOP OF BALL MILL MAN HOLE DOOR. THEY WERE WERE OPENING MILL FOR INTRNAL INSPECTION. BAR STRUCK SAFETY LUG & DEFLECTED UPWARD STRIKING INJURED IN HEA D. SUTURES REQUIRED TO CLOSE WOUND.

TWO EMPLOYEES WORKING TOGETHER ON REPLACING NOSERING CASTINGS ON KILN DURING SHUTDOWN EMPLOYEES WERE WALKING 275 PANEL CASTING OFF A PALLET ON RAMP NEAR NOSE TO BOTTOM OF SHELL CASTINGS WERE M OVED FROM THERE WITH COME-ALONG TO POSITION IN SIDE OF SHELL CASTING SLIPPED FROM ONE EMPLOYEES GROIN & CAUSED STRAIN TO OTHER EMPLOYEE

FOREIGN MATERIAL WAS IN COAL MILL. MILL WAS LOCKED OUT AND WAS BEING MANUALLY TURNED TO FIND AND REMOVE FOREIGN MATERIAL. MILL IS MANUALLY TURNED USING PINCH BAR ON SHAFT COUPLING BOLTS. BAR S LIPPED AND EMPLOYEE'S HAND WAS PINNED BETWEEN BAR CONCRETE BASE OF MILL. FIT BETWEEN COUPLING SHAFT BOLT AND PINCH BAR CONTRIBUTED TO ACCIDENT.

HOLDING DRIFT HIT WITH HAMMER MISSED IT HIT HAND

REPLACING BELT WITH WRENCH STRUCK WITH HAMMER SLIPPED STRUCK HIS HAND

EMPLOYEE WAS CLEARNING CHUNKS OF CLINKER THROUGH COOLER PORT AT FRONT OF CADLER. EMPLOYEE PUSHED BAR HE WAS USING TOO FAR AND STRUCK HIS HAND AGAISNT THE ACCESS DOOR JAMB.

CHAIN SAW WAS CLAMPED IN VISE AND HE WAS SHARPENING THE CHAIN WITH A FILE. THE FILE SLIPPED AND THE CHAIN CUT HIS THUMB. SUTURES REQUIRED.

EMPLOYEE WAS LIFTING BRAKE ASSEMBLY FOR OVERHEAD CRANE WITH PRY BAR TO REMOVE BOLT FOR BRAKE.

SWEEPING ADN SHOVELING CEMENT DUST AT BASE OF SILO. EMPLOYEE WAS BENDING OVER SWEEPING DUST ONTO SHOVEL. CEMENT DUST, BLEW IN EYE. INJURY WAS TREATED WITH FIRST AID ON 8-20-90 AND 8-21-90. MEDICAL TREATMENT WAS PROVIDED ON 8-22-90.

EMPL TIGHTENING ELEVATOR FEED LINE DRAG FROM CLINKER SILO TO #2 FINISH MILL USING COME-ALONG TO PULL ENDS TOGETHER TO CONNECT.EMPL PULLING ON HANDLE WHEN HANDLE BROKE.

BENT O VER TO WORK ON COMPRESSOR, USING WRENCH HIT WENCH WITH HAMMER FELT PAIN IN LOW BACK

EMPLOYEE WAS BREAKING DOWN SNOWMAN WITH LONG ROD THROUGH PART OF SIDE OF COOLER. BITS OF HOT CLINKER BLEW FROM COOLER AND STRUCK EMPLOYEE'S HANDS. GLVOE WORN BY EMPLOYEE DID NOT PROVIDE SUFF ICIENT PROTECTION.

LEFT RING FINGER CAUGHT BETWEEN BUGGY AND BAR STITCHES IN FINGER.

WHILE SWEEPING THE FLOOR HE WALKED INTO A LOW HORIZONTAL PIPE STRIKING HIS HARD HAT AND HEAD JUST ABOVE RT EYE. RESULTED IN SOME MUSCLE TIGHTENING HE DID NOT REPORT INCIDENT TO FOREMAN UNTIL A BOUT 10 AM 12-14 WHEN MUSCLES BECAME RIGID FROM USING JACK HAMMER WHICH CAUSED MORE TIGHTENING.

EMPLOYEE ALLEGES WHILE INSIDE A DUST COLLECTOR STANDING ON PLANKING TO REACH THETOP OF THE BAG CARRIER BRACKET FOR THE DUST COLLECTOR. HE WAS PUSHING UP WITH A PRY BAR TO HOLD THE BAG CARRIER IN POSITION. HE ATTEMPTED TO INSTALL BOLTS WITH HIS RIGHT HAND. BAR SLIPPED. BRACKET FELL STRIKING RIGHT THUMB AS CARRIER FELL.

WHILE SHOVELING DIRT CAUGHT HAND BETWEEN SHOVEL HANDLE AND WALL.

WHIEL REMOVING 4ILL BOLTS FROM MILL SCREENS EMPLOYEE HIT HIMSELF ON HIS LEFT HAND FIFTH FINGER WITH A HAMMER

EMPL USING POLE3STUCK THROUGH OPENING IN TOP OF COAL TANK TO TAP HIGH LEVEL SWITCH TO CHECK CONTENT LEVEL.WHEN PULLED HIS HAND OUT OF HOLE,RUBBED HAND AGAINST METAL RECD CUT FROM SHARP EDGE.

EMPLOYEE ALLEGE8 HE WAS SHOVELING DIRT ON THE 7TH FLOOR AT R-16 CONVEYOR .THE HEEL OF THE SHOVEL BECAME CAUGHT AS HE WAS SLIDING THE FULL SHOVEL SLOWLY BACKWARDS ON THE FLOOR.HE THEN FELT PAIN IN HIS LEFT SH2ULDER.

INJURED WASX US3NG A HARRINGTON LB020 2 TON COMALONG TO PULL R-3 BUCKET ELEVATOR TOGETHER HANDLE OF COMALONG SPUN IN REVERSE STRIKING LEFT FOREARM & LEFT FACE

HE WAS OUT ON C5LLOUT OVERTIME TO ASSIST WITH A REPAIR. HE WAS PULLING A CABLE FROM A CONVEYOR BELT SPLICE USING A PAIR OF VISE GRIP PLIERS. THE PLIERS SLIPPED OFF THE CABLE CAUSING A LOSS OF BALANCE. HE AL5EGES HE FELL BACKWARDS HITTING HIS SIDE ON THE ANGLE IRON.

PIPE WRENCH HIT CLAIMANT IN CHEST WHILE BREAKING RODS