Buscar en el registro

When employee leaned forward while using a 15 lb. chipping hammer, he felt pain in his right foot. Employee was treated and placed on restricted duty. Restriction were accomodated, no lost time.

A wedge the employee was installing dislodged from its mount striking the employee on both legs.

Employee was moving a pump with a bar in his hand. While trying to wedge the bar to move the pump, the bar slipped moving forward striking the employee on the left hand.

While trying to pry a screw out of a pump with a 5' bar, the bar slipped off the fulcrum point causing a strain to the right shoulder.

While attempting to bend a metal tab on a Clinker Cooler door using a four pound sledge hammer, the hammer hit the edge of the door, deflected and hit the worker's left thumb. The impact resulted in a laceration requiring sutures.

While placing a wrench on a cam nut the wrench slipped and fell to the deck where the employee's hand was located. The wrench struck the employee's right hand.

Employee was cutting rubber backing for shell liners with a razor knife when he slipped and cut his pinky finger of left hand. Employee received 9 stitches.

While prying a gearbox off of a shaft, the bar slipped pinching the employee's finger between the bar and weighfeeder.

Employee was removing liners in the mill with a sledge hammer when a piece of hammer head chipped off hitting employee in the forehead. Employee received stitches.

While cutting a strip of rubber hanging from 8BC36 Conveyor Belt, the knife slipped causing a laceration to the left inside knee.

As ee was removing oil filter on 858-067 haul truck; he felt a sharp pain in his right wrist when pulling on the filter wrench. (reportable due to work restrictions)

EE WAS CHIPPING SLAG OFF OF A WELD, WHILE ANOTHER EE WAS DOING THE SAME. A PIECE OF HOT SLAG WAS KNOCKED OFF BY THE OTHER EE AND HIT THE INJURED EE IN LOWER LEFT EYELID

CO-WORKER WAS GOING TO HIT THRUST RING ON KILN TO KNOCK INTO PLACE. HE WAS USING A 10 LB SLEDGE HAMMER. THE HAMMER GLANCED OFF KILN TIRE AND HIT EE'S HAND WHICH WAS APPROX 1 1/2 FT FROM WHERE HE WAS SUPPOSED TO HIT.

LABORER WAS SHOVELING IN THE YARD, SMASHED HIS HAND BETWEEN SHOVEL HANDLE AND POST.

AFTER USING A UTILITY KNIFE TO CUT HOSE, EE PLACE KNIFE IN HIS POCKET WITH THE BLADE NOT COMPLETELY SECURE THEREBY CUTTING HIS LEG.

EE WAS USING A PRY BAR TO REMOVE LARGE ROCK FROM (9FA01) PAN FEEDER TO CRUSHER. THE ROCK SHIFTED STRIKING THE PRY BAR HE WAS USING, SMASHING HIS LEFT THUMB AGAINST THE SIDE OF (9FA01) PAN FEED ER.

EE WAS BUSTING CEMENT CHUNKS, WHILE SWINGING THESLEDE HAMMER HIS FINGER WAS CAUGHT BETWEEN THE CHUNKS AND THE HAMMER.

EMPLOYEE WAS WORKING ON A GEARBOX TIGHTENING NUTS WITH A 2 3/8 BOX ENDED WRENCH. HE SPRAINED RIGHT SHOULDER BY PULLING AND PUSHING WRENCH. HE WAS TREATED FOR FIRST AID AND CAME BACK TO WORK. H E WENT FOR SURGERY ON SAME SHOULDER ON 5/17/02 AND MISSED WORK UNTIL NOW.

EMPLOYEE WAS REMOVING LINERS IN THE BELL MINE. HE PLACED A WEDGE UNDER LINER TO LOOSEN FROM RUBBER POD. WHILE SWINGING A SLEDGE HAMMER HE MISSED WEDGE AND HIT HIS RIGHT FOOT ON THE INSIDE AT A PPROX THE KNUCKLE OF BIG TOE.

EE WAS CUTTING A PIECE OF BELTING WITH HIS UTILITY KNIFE. KNIFE SLIPPED OUT OF RUBBER AND CUT LEFT HAND RESULTING A CUT WHICH TOOK 7 STITCHES.

EMPLOYEE USING 10 LB HAMMER DRIVING BOLTS INTO MILL HEAD WHEN THE HEAD OF HAMMER CAME OFF AND STRUCK HIM ON THE BRIDGE OF NOSE STRIKING SAFETY GLASSES AND CUTTING HIS NOSE.

USING A SLEDGE HAMMER, HAMMERING A SCREW CONVEYOR SUIDE ON SHAFT, AND HE STRAINED HIS RIGHT SHOULDER.

WHILE CLOSING 5-CY-10 (CONE DOOR) WITH 5' BAR, EE FELT A SHARP PAIN IN LOWER ABDOMEN.

EE USING A HAMMER STRUCK LEFT SHIN WHILE DOING REGULAR WORK DUTIES.

EMPLOYEE WAS CRUSHING A ROCK SAMPLE, USING A ROLLER CRUSHER. HE CUT AND RECEIVED A SMALL FRACTURE OF MIDDLE FINGER OF RIGHT HAND.

WORKING IN THE PREHEATER TOWER, DOING DESCALING; REMOVING MATERIAL FROM BUILDUP.

EE WAS USING A HAMMER, WHEN IT SLIPPED AND STRUCK HIS HAND.

HE WAS HOLDING THE RUBBER TO CUT A HALF CIRCLE SHAPE AT THE EDGE OF THE SHIRT WHEN THE KNIFE SLIPPED AND CUT HIS LEFT HAND BY THE THUMB.

EE WAS PUSHING A GEAR BOX BEING PULLED BY A CHAIN UNDER PRESSURE. THE CHOKER BROKE AND THE CHAIN HIT BOTH HANDS.

EE WAS USING A PRY BAR TO LOOSEN A PART ON A FEED HOPPER. THE PRY BAR SLIPPED & STRUCK EE IN THE PALM OF HIS RIGHT HAND.

DROPPED A PIPE WRENCH ON RIGHT FOOT AND FRACTUREFOOT.

EE WAS USING A HAMMER TO OPEN A DUST COLLECTOR DAM--HE MISSED THE LATCH AND HIT HIS THUMB--FORCING IT BACKWARDS.

AREA #3 EQUIPMENT NUMBER 5-DDC-3 WAS WORKING REPLACING WHEELS. THE CREFEW JACK THAT WAS HOLDING THE BUCKET OFF RAIL SLIPPED. JACK SLIPPED FINGER CAUGHT BETWEEN WHEEL AND RAIL.

EE WAS CLEANING BUILDUP AROUND.C. BAG CAGES AND CUT HIS LIP WHEN THE BAR SLIPPED WHILE HE WAS TRYING TO PRY THE CAGE OUT.

WHILE EMPLOYEE WAS CUTTIGN TOWARD HIS BODY, THE KNIFE SLIPPED OUT OF THE BAG AND NICKED HIS LEG.

CUTTING DUCT TAPE OFF TUBE WITH SHEET METAL SHEARS. POKING SHEARS SLIPPED INTO HAND HOLDING TUBE.

AT POLYMER STATION, AUGERING PIPE, EMPLOYEE'S HAND SLIPPED HITTING GRATE ON FLOOR.

EMPLOYEE WAS CLEANIG BUILD-UP MATERIAL ON BELT OCNVEYORS WITH THE USE OF A STEEL BAR. WHEN AMTERIAL BROKE LOOSE, HIS HAND SLIPPED AND SMASHED BEDDTWEEN THE BAR AND THE DOOR FRAME.

ANGLE IRON DISLODGED AND HIT EMPLOYEE ON HIS NECK AND SHOULDER.

OLD BELT STUCK IN THE TAKE UP PULLEY. USING A RAZOR KNIFE. EE TRIED TO REMOVE THE EXCESS OLD BELT. THE KNIFE SLIPPED AND CUT INTO HIS LEFT LOWER LEG.

EMPLOYEE WAS OPENING A BOX USING A KNIFE

EMPLOYEE WAS REMOVING BOLTS FROM FEED BLINDS.

APPLYING PRESSURE TO A BAR.

EMPLOYEE WAS SWINGING A SLEDGEHAMMER.

MOVING PUMP;HAD TO TAP FRAME DOWN AND HIT FINGER.

WHILE CLEANING CHUTE,SMASHED RIGHT HAND FINGER ON DOOR.

WHILE OPENING DOOR ON RAILROAD CAR BAR SLIPPED & HE PULLED MUSCLE IN BACK.

PRYING N FAN MOTOR, BAND SLIPPED AND POINT OF BAR STRUCK HIM ON LEFT SIDE OF CHIN.

CUTTING A PIECE OF HOSE WITH A KNIFE.

MAIN FRAME HEATED TO ACCEPT SOCKET FIT INSTALLING SOCKET IT BECAME COCKED DROPPED IN FRAME CATCHING TIP OF FINGER