Buscar en el registro

Employee alleges that a wrench slipped from their hand and injured their foot.

Employee alleges EE was using a prybar to get rock out, the prybar slipped and EE hit the left side of EE's cheek. EE received stitches on EE's cheek.

Employee alleges was adjusting a conveyor belt and the wrench slipped pinning employee's right finger between the steel and wrench. Employee received 12 sutures.

Employee alleges EE was taking a handrail off using a wrench and the wrench slip off a bolt hitting EE in the nose. Late Reporting due to the employee said EE's nose wasn't fractured. The Dr. notes came in on 09/03/21 and the notes stated EE had a nasal fracture.

Employee alleges was using a prybar to remove a large rock from the conveyor, As EE was using the prybar, the rock got caught and cut EE's rt. middle finger. Employee did seek medical attention but was released. EE went back for medical treatment again on 10/15/20. A procedure was performed on EE's finger and EE is losing time as of 10/15/20.

EE alleges he was removing bolts from the wash screen with a driver guard and he turned to switch positions and he twisted his right knee.

Employee alleges he was trying to remove the top of the hand cleaner with a utility knife and the knife slipped and cut his left index finger at his knuckle. A medical procedure was done by using glue to glue together his finger.

Employee alleges he was tightening a bolt and the wrench slipped off and his hand struck the conveyor frame at full force fracturing the tip of his left pinky finger - he received 7 stitches.

Employee alleges he was pulling on a pry bar to loosen a chain and the bar slipped and hit him in the nose. The employee went to the Dr. on 03/06/12 and we were then informed on 03/07/12 that his nose was fractured.

Employee alleges he was using a utility knife to cut rubber and the tip of the utility knife cut his pointy finger on his left hand. He received 3 stitches.

Employee alleges he was breaking up rock out of riprap grizzle and as he was hammering he twisted his lower back.

Employee alleges he was taking a pin off of brakes with a screwdriver and it slipped and went into his right index finger. Employee punctured his finger and had surgery on 05/10/2007.

Employee alleges he was trying to roll logs in the washer; prybar slipped and cut his chin. He received 3 stitches.

Employee alleges he was prying on frozen mud to clear chute and he felt pain in his stomach. Had surgery on 12-13-05 started losing time then.

Employee alleges he was putting in wear bars and hit his left index finger with a hammer.

EMPLOYEE ALLEGES HE WAS IN THE PROCESS OF REBUILDING A JET PUMP WHILE HE WAS TIGHTENING THE BOLTS FOR THE COVER SEAL, AS HE STOOD UP HE FELT PAIN IN HIS LOWER BACK.

EE ALLEGES HE WAS USING A KNIFE TO INSTALL A NEW BELT ON THE CONVEYOR AND THE KNIFE SLIPPED AND CUT HIS THUMB. HE RECEIVED 5 STITCHES.

EMPLOYEE ALLEGES HE WAS CUTTING A PIECE OF THE CONVEYOR BELT WITH A KNIFE AND IT SLIPPED AND CUT HIM ON HIS RIGHT LEG.

EMPLOYEE ALLEGES HE WAS DISASSEMBLING A PUMP USING A PRY BAR TO UNSCREW THE IMPELLER AND THE BAR SLIPPED FORCING THE BAR ONTO HIS RIGHT CALF.

EE ALLEGES HE WAS USING A PRYBAR TO CLEAN OFF BUILT UP MATERIAL FROM THE PRIMARY CONVEYOR AND THE PRYBAR SLIPPED SMASHING HIS LEFT MIDDLE FINGER.

EE ALLEGES HE WAS BEATING ON BIN WITH A PIECE OF METAL TRYING TO UNPLUG THE BIN AND HE FELT PAIN IN HIS RIGHT WRIST.

EMPLOYEE ALLEGES HE WAS REMOVING DRIVE SHAFT BOLTS, THE SOCKET SLIPPED HEAD OF BOLT, HITTING EDGE OF METAL SKID PLATE BELOW WITH FIST, CAUSIN GHIM TO CUT HIS RIGHT RIGHT MIDDLE KNUCKLE.

EMPLOYEE WAS STANDING ON SCAFFOLDING SWINGING A 16 LB HAMMER HORIZONTALLY AT WAIST HIGH STRIKING A LARGE PIECE OF STEEL WELDED ONTO NUT WHEN HE MISSED THE STEEL HIS MOMENTUM TOOK HIM AROUND TW ISTING HIS BACK AND PULLING IT OUT OF PLACE.

EMPLOYEE WAS TRIMMING A PIECE OF 1/2"BELTING, HE CUT PALM OF HAND WITH RAZOR KNIFE.

EMPLOYEE WAS PUSHING BRAKE DRUM & HOUSING ON SPINDLE WHEN TROLLEY BROKE, PULLING EMPLOYEE TO GROUND, HE FELT PAIN IN GROIN AREA.

EE WAS FILING HOLE WHEN SAFETY PROP SLID OUT OF FRAME SMASHING HAND.

EE WAS CUTTING NYLON HOSE, HAD FAUCET WITH HOSE FACING VERTICALLU ON THE GROUND, THE KNIFE SLIPPED AND CUT EE ON LEFT TOP OF HAND.

INJURED OCCURRED AS A COMBINATION OF PULLING, PRYING, POUNDING, SCRAPING, LIFTING IN A CONFINED SPACE (BETWEEN TOP AND MIDDLE DECK OF A 3 DECK SHAKER SYSTEM. ALL SCREEN RAILS WERE MUDDED UP AN D FROZE AS WERE THE SCREENS.

PLATE WAS LAID ON TRACK OF DRILL TO USE AS AN ANVIL; HAMMER WAS SWUNG DOWNWARD AND IT GLANCED OFF PLATE STRIKING EMPLOYEE'S FINGER. REPORT WAS NOT SENT INTO OUR OFFICE UNTIL OCTOBER 14TH AND W HEN THE DOCTOR'S REPORT CAME INTO THE OFFICE JUST RECENTLY, IT SHOWED THAT A SPLINT WAS PUT ON HIS FINGER. (REASON FOR LATE REPORTING).

WHILE USING RACHET TO TIGHTEN LINES TO PULL BARGES TOGTHER EE STRAINED HIS BACK.

WHILE MEASURING DRILL STEEL WITH A TAPE MEASURE IT GOT CAUGHT EMPLOYEE PULLED ON IT & IN DOING SO DETACHED A MUSCLE IN HIS ARM

EMPLOYEE WAS SHOVELING SNOW OFF SCALE & H IT RUBBER FLAP ON THE SCALE WHICH CAUSED A JOLT CAUSING EMPLOYEE TO TWIST LOWER BACK EMPLOYEE DID NOT SEEK MEDICAL ATT ENTION AT THIS TIME ON JAN 10 1992 WE RECEIVED BILLS FROM THE DOC SHOWING SHE RECEIVED CHIRPORACTIC TREATMENT

WHILE TIGHTENING DOWN CHAINS WITH RATCHET BINDERBINDER CAME LOOSE AND HANDLE STRUCK EMPLOYEE IN EYE.

LOOSENING BOLTS WRENCH SLIPPED STRAIN BACK WENT TO CHIRO.

EMPLOYEE BENT OVER NOSE OF LADDER (ON DIGGER) TIGHTENING 7/8 BOLTS AND STRAINED HIS BACK.

EMPLOYEE WAS POUNDING SHAFT AGAINST WEDGE WHEN HIS ELBOW HIT CONE AND HE PINCHED HIS FINGER AGAINST CONE RIPPING NAIL AND SKIN REQUIRING STITCHES.

EMPLOYEE WAS REMOVING NUT FROM BOLT OVERHEAD AND PIECE OF STEEL FELL LODGING IN HIS EYE.

EMPL LIFTING AN8 PUSHING UP ROLLER FRAME WHEN IT SLIPPED CUTTING AND BREAKING TIP OF FINGER REQ 6 STITCHES.

EMPLOYEE WAS US3NG WEDGE TO DISLODGE BOULDER AND THE WEDGE FLEW UP HITTING HIM ON THE RIGHT SIDE OF HIS FACE.

EMP WAS BENT OV9R LOG WASHER TIGHTENING UP THE BOLTS WITH A WRENCH AND T WISTED HIS BACK

EE WAS CHANGING SCREENS HITTING WEDGE PIN WITH HAMMER TO TIGHTEN SCREENS & A PIECE OF STEEL FLEW OFF WEDGE PIN & LODGED IN HIS EYEBALL.

USING PRY BAR TO ROTATE FEED SCREEN PRY BAR SLIPPED AND CAUGHT INDEX LEFT FINGER BETWEEEN BAR AND HANDRAIL.

EMPLOYEE WAS DRIVING LAST PIN FROM BUCKET WHEN HAMMER SPLINTERED AND CUT AN ARTERY AND LEFT STEEL IN ARM

EMPLOYEE WAS REMOVING A GENERATOR FROM SCRAPING MACHINE AND TWISTED HIS BACK WHILE SWINGING A HAMMER