Buscar en el registro

THE INDIVIDUAL WAS ASSISTING IN THE EXCHANGE OF TEETH ON THE DRAGLINE BUCKET. HE TURNED TO PICK UP A SLEDGE HAMMER AND IN SO DOING WRENCHED HIS BACK. HE DID NOT PICK UP THE HAMMER AS HIS LOWER BACK HAD ALREADY BEEN INJURED.

WHIE THIS INDIVIUAL WAS CUTTING A BOX WITH A UTILITY KNIFE HE SLIPPED AND CUT THE THUMB ON HIS OPPOSITE HAND. THE THUMB WAS CUT AT THE TIP OF THE NAIL AREA REQUIRING FIVE STITCHES.

TWO WELDERS WERE ATTEMPTING TO DISLODGE A WEAR PLATE FROM THE BOTTOM OF A DRAGLINE BUCKET WHEN STRUCK WITH A SLEDGE HAMMER A PIECE OF METAL FROM THE WEAR PLATE CAME LOOSE AND STRUCK THE OTHER WELDER IN THE NOSE AND BECAME EMBEDDED IN THE CHEEK. BOTH INDIVIDUALS WERE DOING THEIR REGULARLY ASSIGNED JOBS AND WEARING ALL PROTECTIVE EQUIPMENT REQUIRED.

EMPLOYEE WAS TIGHTENING THE PLUG ON THE BOTTOM OF THE DOZER, L.H. HYDRAULIC PIPE, WHEN THE 3/4" RATCHET HE WAS USING SLIPPED, CAUSING HIM TO LOSE HIS FOOTING AND FALL BACK, JERKING HIS LEFT SH OULDER.

USING A SLEDGE HAMMER TO REMOVE WEAR SHOES FROM THE BOTTOM OF THE DRAGLINE BUCKET. THE WEAR SHOEBROKE AND A PIECE OF STEEL HIT HIM IN THE RIGHT INNER THIGH. THE FOREIGN MATERIAL IMBEDDED IN HI S LEG.

PULLED MUSCLE IN LEFT ELBOW WHILE PULLING PLUNGER IN A GREASE GUN.

EMPLOYEE WAS GREASING IN THE TIPPLE PRIMARY CRUSHER AREA. HE HAS HAD A HISTORY OF BACK PROBLEMS.

WHILE CLOSING A CAR DOOR WITH A BAR THE BAR SLIPPED CAUSING THE DOOR TO MOVE DOWNWARD FORCING THE BAR BACK STRIKING THE EMPLOYEE IN THE JAW.

THIS MAINTENANCE SPECIALIST WAS ADJUSTING SPRING TENSION ON AN OVERHEAD DOOR ONE OF THE RODS B EING USED TO TURN THE SPRINGS SLIPPED STRIKING HIM ON THE FOREHEAD

THE INDIVIDUAL WAS REPAIRING THE SECONDARY CRUSHER IN THE COAL PROCESSING UNIT AND DROVE A METAL WEDGE BETWEEN THE CRUSHER ROLL AND THE WALL OF THE CRUSHER. WHILE VISUALLY INSPECTING THE AREA BEHIND THE WEDGE, THE WEDGE SLIPPED OUT AND STRUCK HIM IN THE FOREHEAD.

EE WAS REMOVING A DRAGLINE BUCKET TOOTH, HE WAS USING A MALL TO HIT THE TOOTH. A CHIP OF STEEL FLEW OFF, CUTTING HIS RIGHT FOREARM, RESQUIRING STITCHES TO CLOSE.

INDIVIDUAL WAS HELPING TO CHANGE TEETH ON DRAGLINE BUCKET AND WAS HOLDING A PIN HAMMER WHILE ANOTHER INDIVIDUAL WAS DRIVING THE PIN. THIS PERSON MISSED THE PIN WITH THE SLEDGE HAMMER AND STRUC K HIS FINGER.

INDV MOUNTING PULLEY ON AIR COMPRESSOR USED CHISEL TO SPREAD THE OPENING.AS PULLEY WAS BEING PLACED IN POSITION CHISEL SLIPPED OUT AND STRUCK HIM -SMALL CUT ABOVE RIGHT EYE REQ MEDICAL ATTEN.

ASSEMBLING COUPLER TO MAGNA TORQUE SHAFT ON 1400 LOADING SHOVEL HE WAS HAMMERING ON HAMMER WRENCH MISSED WRENCH WITH HAMMER HEAD AND HIT FINGE BETWEEN HAMMER HANDLE AND WRENCH.

INDV DRIVING PIN OUT OF RIPPER SHANK ON DOZER WHEN PIECE OF METAL BROKE OFF AND PENETRATED HIS FINGER.

MAN WAS ASSISTI3G A CREW TO PULL A COUPLING OFF A SWING MOTOR FOR A DRAGLINE WHEBN THE PU MAN WAS ASSISTING A CREW TO PULL A COUPLING OFF A SWING MOTOR FOR A DRAGLINE WHEN THE PULLER BR OKE. PART OF TH9 PULLER STRUCK HIM IN THE ABDOMINAL AREA

INDIVIDUAL WAS 7UTTING A 1/2 INCH CABLE WITH A CUTTER AND HAMMER WHEN A SMALL PIECE OF CABLE FLEW UP AND STRUCK HIS LEFT HAND.

INDIVIDUAL WAS 9EMOVING A TOOTH FROM A DRAGLINE BUCKET. INDIVIDUAL WAS USING A SLEDGE HAMMER TO REMOVE THE TOOTH AS HE STRUCK THE TOOTH A PIECE OF STEEL, ABOUT THE SIZE OF A SLIVER MAYBE SLIGH TY LARGER, DISL2DGED FROM THE TOOTH AND STRUCK THE THIGH. THIS CAUSED A CUT OF ABOUT 1/4" ON HIS LEFT THIGH.

HE WAS CUTTING 0IRE CARS AND BUMPED HIS LEG ON THE CABLE WHICH HAD A BROKEN STRAND STICKING OUT END CUT HIS UPPER THIGH ON HIS LEFT LEG.

INDIVIDUAL WAS IN THE PROCESS OF CHANGING TEETH ON THE BUCKET OF OUR 7620 DRAGLINE. ONE TOOTH WAS NOT COMING OFF SMOOTHLY SO THE INDIVIDUAL USED A HAMMER TO DISLODGE THE TOOTH. AS THE INDIVID UAL WAS POUNDING A SLIVER OF STEEL CAME OFF THE TOOTH AND HIT HIS KNEE.

TWO WELDERS WERRE MOVING THE 1570-W DRAG CLEVIS THAT THEY WERE WELDING ON. AS THEY WERE MOVING IT, THE CLEVIS SLIPPED PINCHING I.NAME\S HAND BETWEEN THE CLEVIS AND THE FLOOR. SKIN AND FLESH WE RE DAMAGED ON THE MIDDLE FINGER - LEFT HAND. ACCIDENT OCCURRED IN WELDING SHOP.

EE WAS CLEANING GREASE BETWEEN THE CIRCLE RAIL & SWING RACK ON 1570-W DRAGLINE AS HE WAS WORKING IN A CONFINED AREA HE TWISTED HIS NECK & STRAINED MUSCLES.

REMOVING BOLTS FROM CAM OF 1570 WITH A WRENCH.AS HE LOOSENED EACH BOLT AND NUT HE HAD TO REACH HIGHER.TO REMOVE 1 BOLT HE STOOD OF TOP OF GUARD RAIL TO GET MORE LEVERAGE.HE LOST HIS BALANCE AN D FELL.

WHILE INSTALLING NEW FAN BELTS ON THE REAR ENGINE OF A 657 SCRAPER THE BAR SLIPPED THAT HOLDS THE SPRING LOADED BELT TIGHTENER PULLY AWAY FROM THE BELTS AND PINCHED HIS LEFT THUMB BETWEEN THE PULLEY AND BELT AND BROKE THE THUMB BONE

LIFTING AND PUSHING SWING CASE COVER TO TAKE IT OUT THE DOOR WITH THE HOIST WHEN COVER TWISTED AND WRENCHED MY BACK

THE MECHANIC WAS USING TORQUE WRENCH TIGHTENING WHEEL NUTS ON A COAL HAULER THE WRENCH SLIPPED OFF THE NUT AND PINCHED HIS FINGER ON LEFT HAND BETWEEN THE HANDLE OF THE WRENCH AND RIM OF THE WHEEL