Buscar en el registro

Employee was attempting to cut weed eater string with a pocket knife and cut his finger in the process. Employee cut the right index finger.

Was using a rake to clean belt and it got caught in roller. Handle hit him on right side of hand.

Employee was working on removing a radiator from a d11 bulldozer. while un-hooking an anti-freeze line the employee hut/strained a muscle in his neck and shoulder while loosening a bolt w/ a wrench

Employee was removing a tooth from a 988 loader bucket using an 8lb hammer knocking tooth from side to side when a sliver of metal broke away from tooth striking employee on his left leg front thigh area. Foreign body was removed from employee.

Attempting to raise belt head with lifting jack to reset crib, his hand slipped and jack bar came out and hit him, resulting in a cut to his chin requiring sutures.

Ee was engaged in removing a deck from the coarse coal screen. The deck became wedged. When ee freed the deck with a slate bar the deck struck his foot.

EE STATED HE STRUCK HIS LEFT HAND AGAINST BELT GUARDING AT #9 TAIL PIECE WHILE SHOVELING. EE SUSTAINED LACERATION TO HIS INDEX FINGER (LEFT HAND) REQUIRING (7) SUTURES.

EE WAS ASSISTING IN PULLING SLACK OUT OF LONG-JOHN BELT AT #7 HEAD DRIVE, A 1/2" ROPE WAS BEING USED, ROPE BROKE, A STRAND OF THE ROPE CAME OFF STRIKING EE IN THE CORNER OF HIS LEFT EYE. EE WA S APPROXIMATELY 15-20 FEET AWAY FROM WHERE ROPE BROKE. EE SUSTAINED A PUNCTURE WOUND TO HIS LEFT EYE. EE WAS WEARING SAFETY GLASSES.

EMPLOYEE STATED DURING THE PROCESS OF THREADING CYLINDER SHAFT BACK INTO CLEVIS ON WEIGH-BIN AT THE LOADOUT, THE 15" CRESCENT WRENCH HE WAS USING SLIPPED OFF CYLINDER SHAFT ALLOWING HIS RIG HT HAND TO STRIKE A PIECE A 2" ANGLE IRON. EE SUSTAINED LACERATION TO BASE OF HIS RIGHT THUMB REQUIRING 6 SUTURES.

EE WAS STRUCK ON HIS LEFT EAR BY A PIECE OF FALLING ROCK. EE SUSTAINED LACERATION TO HIS LEFT EAR THAT REQUIRED SUTURES.

EE WAS ASSISTING IN MAKING BELT SPLICE, IN THE PROCESS OF REMOVING BELT SPLICE BOARD, EE'S LEFT HAND GOT CAUGHT BETWEEN SPLICE BOARD AND LONG-JOHN STRUCTURE. EE SUSTAINED A LACERATION TO BACK OF HIS LEFT HAND THAT REQUIRED FOUR SUTURES.

EMPLOYEE WAS DRIVING PINS INTO A FORM WHEN HE HIT THE INDEX FINGER OF HIS RIGHT HAND.

EE WAS ASSISTING IN PULLING SECTION TAILPIECE OVER WITH AN 1 1/2" STEEL ROPE, HAD ROPE TIED BACK IN ITSELF AROUND HORSESHOE OF #2 MBC. EE REMOVED PIN OUT OF ROPE, ROPE SPRUNG UP STRIKING EMPLO YEE ON LEFT CHEEK OF FACE. EE SUSTAINED FRACTURETO HIS LEFT CHEEK BONE.

EMPLOYEE WAS IN THE PROCESS OF CLOSING A RAILROAD CAR DOOR. EMPLOYEE INSERTED A BAR IN THE CAR DOOR LOCK MECHANISM. WHEN THE EMPLOYEE PULLED THEBAR DOWN TO CLOSE DOOR, EMPLOYEE REACHED TO PULL THE LOCK OR LATCH DOWN, THE RAILROAD CAR SPRUNG OPEN. THIS ALLOWED THE BAR TO SLIP OUT OF EMPLOYEE'S HAND, STRIKING EMPLOYEE BEHIND HIS RIGHT EAR. EMPLOYEE SUSTAINED LACERATION WITH STITCHES.

EE WAS HELPING INSTALL TRACK WAS USING A BAR TO SLEW TRACK WHEN HE TWISTED HIS LEFT KNEE. *EE MISSED NO WORK. FIRST DAY MISSED DUE TOP THIS INJURY WAS 7-20-99.

EE WAS ASSISTING WITH REMOVING BATTERIES FROM A 488 S&S SCOOP. PIN ON OPERATORS SIDE OF SCOOP THAT LOCKS BATTERIES IN POSITION WOULD NOT SLIDE BACK TO UNLOCK BATTERIES. EE WAS HOLDING A BAR (3 6" COMBINATION BOLT WITH A SLEEVE) AGAINST THE PIN WHILE ANOTHER EE TAPPED THE BAR WITH A HAMMER DURING THIS PROCESS PIN RELEASED IMMEDIATELY ALLOWING BAR THAT EE WAS HOLDING TO BE CAUGHT, BA

EMPLOYEE WAS HELPING REMOVE SHEAR SHAFT ON OFF SIDE OF CONTINUOUS MINER RIPPER HEAD USING SLATE BAR TO PRY SHAFT OUT. BAR SLIPPED, EMPLOYEE'S RING FINGER ON LEFT HAND WAS CAUGHT BETWEEN BAR AN D MINER BIT. EMPLOYEE SUSTAINED FRACTURE TO TIP OF RING FINGER, LACERATION TO RING FINGER REQUIRING 5 SUTURES.

EMPLOYEE WAS ASSISTING IN PULLING SLACK IN MOBILE BRIDGE CONVEYOR CHAIN (A RATCHET COME-ALONG WAS BEING USED) WHEN CHAIN ON COME-ALONG BROKE STRIKING EMPLOYEE ABOVE RIGHT EAR KNOCKING EMPLOYEE DOWN. AS EMPLOYEE FELL HE STRUCK HIS LEFT EAR ON MOBILE BRIDGE. EMPLOYEE SUSTAINED LACERATION TO LEFT EAR REQUIRING 7 SUTURES AND A FRACTURE TO MANDIBLE.

SHAVING BELT WHEN UTILITY KNIFE SLIPPED OFF BELT CUT TENDONS IN MY LEFT THUMB.

EE WAS ATTEMPTING TO CLOSE RAIL CAR DOOR WHEN BAR SLIPPED CAUSING EE'S WEIGHT TO SHIFT, RIGHT FOOT STAYED STATIONARY. EE SUSTAINED A SPIRAL FX TO THE TIBULA BONE 1/2" ABOVE RIGHT ANKLE.

EE WAS TIGHTENING THE LUG NUTS ON COAL TRUCK TIRES. THE WRENCH SLIPPED AND HE LOST HIS BALANCE AND BROKE HIS LEG.

EE WAS HELPIGN JACK #2 MOBILE BRIDGE BACK ONTO DOLLIE (USING 5 TON LIFTING JACK). EE WAS INT EH PROCESS OF LETTING JACK DOWN,M HAD DOWNWARD PRESSURE APPLIED TO JACK HANDLE WHEN JACK HANDLE SL IPPED OUT OF EE'S HAND, JACK HANDLE STRUCK EE ON RIGHT SDIDE OF FACE KNOCKING EE'S SAFETY GLASSES OFF HIS FACE, CAUSING EE TO SUSTAIN A LACERAITON TO BRIDGE OF NOSE. ALSO HAD A FRACTURETO NOSE

EMPLOYEE WAS USING A UTILITY KNIFE TO CUT A HOLE IN A PIECE OF MINE BELT. KNIFE SLIPPED OUT OF BELT STRIKING THE EMPLOYEES GLOVED RIGHT HAND, CAUSING A LACERATION AT BASE OF THUMB.

EMPLOYEE WAS HELPING INSTALL TRACK, WAS IN THE PROCESS OF SLIDING AMETAL TIE UNDER RAIL THAT WAS BEING HELD UP WITH A BAR BY ANTOHER EMPLOYEE TWHEN BAR SLIPPED LETTING RAIL FALL CATCHING EMPL OYEE'S LEFT HAND BETWEEN FLOOR OF MINE AND METAL TIE. EMPLOYEE SUSTAINED A FRACTURE TORING FINGE RON LEFT HAND. (EMPLOYEE WAS WEARING META CARPAL GLOVES).

EMPLOYEE WAS IN THE PROCESS OF REMOVING LOADER TOOTH FROM 992 END LOADER BUCKET. WAS HITTING LOADER TOOTH WITH HAMMER WHEN A PIECE OF LOADER TOOTH BROKE OFF BECOMING AIRBORNE STRIKING AND EMBE DDING IN TOP SIDE OF EMPLOYEE'S LEFT HAND. AFTER REMOVAL OF METAL FROM EMPLOYEE'S HAND 2 SUTURES WERE REQUIRED.

EMPLOYEE WAS HELPING CHANGE STACKER BELT SCRAPER, WAS LIFTING UP ON SCRAPER SUPPORTING SCRAPPER WHILE ANOTHER EMPLOYEE WAS LOOSENING SHOCK, SCRAPER ROTATED CATCHING SIDE OF LEFT HAND. EMPLOYEE SUSTAINED LACERATION REQUIRING 4 SUTURES, (EMPLOYEWE WAS WEARING GLOVES).

54736YEE WAS CHANGING RIPPER HEAD JACK ON 12CH11 CONTINUOUS MINER WAS IN PROGRESS OF REPLACING BOTTOM PIN USING BLE HAMMER WITH 18IN HANDLE EMPLOYEE CAUGHT RING FINGER ON LEFT HAND BETWEEN HAN 43506F HAMMER & FRAME OF CONTINUOUS MINER EMPLOYEE SUSTAINED A FRACTURE TO LEFT RING FINGER (DISTAL)

EMPLOYEE WAS REPAIRING A COAL CHUTE IN PREPARATION PLANT, WAS USING 8 LB SLEDGE HAMMER. EMPLOYEE CAUGHT RING FINGER ON LEFT HAND BETWEEN HAMMER HANDL AND CHUTE. EMPLOYEE SUSTAINED FRACTURE TO TIP OF RING FINGER ON LEFT HAND.

EMPL ADJUSTING 1LANT CRUSHER.PUSHING AGAINST BAR ON SCREW TYPE ADJUSTER.BAR SLIPPED AND EMPLS CHIN STRUCK CRUSHER GEAR BOX.