9
registros coincidentes
Mostrando los 9
21 de julio de 2025
CA · Metal/No metálico
Operador de secador, Operador de horno, Operador de planta de secado, Operador de fluidos, Operador de secador de lecho
MAQUINARIA
Knifer River · Atrapado en, bajo o entre objetos en movimiento o engranados
MINER WAS SPOOLING IN A WINCH CABLE. EE WAS GUIDING THE CABLE WITH LEFT HAND AND CONTROLING THE FEED WITH THE CONTROLLER ON RIGHT HAND. AS THEY WERE ALMOST AT THE END, A U BOLT THAT WAS USED TO CREATE A LOOP AT THE END OF THE CABLE, CAUGHT THE CUFF OF THEIR GLOVE AND PULLED THEIR HAND INTO THE OPENING, THE U BOLT CAUGH THEIR MIDDLE FINGER AND LACERATED IT.
18 de julio de 2025
OR · Metal/No metálico
Plomero, Tubero, Montador mecánico
MAQUINARIA
Knife River Corporation-Northwest · Golpeado por objeto proyectado
Employee was blowing themselves off with air hose after end of shift. Leading to foreign material getting into their right eye.
18 de septiembre de 2023
OR · Metal/No metálico
Maestro mecánico, Capataz, Supervisor
MAQUINARIA
Knife River Corporation-Northwest · Golpeado por... no clasificado en otra parte
Individual sustained a 5cm laceration to left forearm while performing maintenance with a 4.5" grinder. Grinding wheel became bound in material while individual was cutting a weld, causing the grinder to accelerate forward into their arm.
18 de septiembre de 2023
OR · Metal/No metálico
Peón de tierra, Operario de patio
MAQUINARIA
Knife River Corporation-Northwest · Atrapado en, bajo o entre un objeto en movimiento y uno fijo
Miner entered HP400 cone crusher after performing lock out/tag out to clear a large rock stuck between cone and mantel. Miner failed to recognize the stored energy in the cone being suspended by the rock. When dislodging the rock, the weight of the cone came down trapping both feet between the cone and mantel.
1 de septiembre de 2023
CA · Metal/No metálico
Operador de grúa, Operador de equipo móvil (MEO), Operador de dragalina, Operador de bola de demolición, Aparejador
MAQUINARIA
Knife River Construction · Atrapado en, bajo o entre un objeto en movimiento y uno fijo
Replacing a coarse material washer (CMW) located inside a tub the employee was pinned between the CMW and a material chute above the tub. the employee was pinned for approximately 30 seconds, briefly lost consciousness and suffered bruising to the ribs and chest.
29 de agosto de 2023
MN · Metal/No metálico
Encargado/operador de trituradora, Operador/trabajador de alimentador de bandeja
MAQUINARIA
Removing a bolt with an impactor to replace the wear plate the carriage bolt moved up. Employee pushed down on the bolt and the sharp edge on the bolt caught their glove pulling a finger down on the rotating bolt cutting their finger.
14 de julio de 2023
SD · Metal/No metálico
Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla
MAQUINARIA
Knife River - South Dakota · Golpeado por... no clasificado en otra parte
EE was removing a worn cutting-edge bolt from the loader bucket. When EE went to remove the nut, the bolt dropped and continued to spin when EE attempted to secure it by grabbing it with EE's left hand, cutting EE's left index finger.
14 de junio de 2023
ND · Metal/No metálico
Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador
MAQUINARIA
Knife River Corporation-North Central · Golpeado contra un objeto en movimiento
Employee was running a scraper and was being pushed by another scraper. EE alleges that the other scraper hit EE hard from behind and EE complained that EE's back was sore and ask to go home for the day. EE supposed to return to work the next day but asked for the day off. On 6/16/23 EE went to the Occ Health Clinic without notifying anyone.
6 de junio de 2023
MN · Metal/No metálico
Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador
MAQUINARIA
Carrying tools and hand held grinder, hit start stop trigger on grinder, grinder cut arm
Mostrando los 9