Buscar en el registro

EE WAS INSTALLING A ROOF BOLT WHEN A RIB ROLLED STRIKING HIM ON RT. HAND AND INJURING HIS MIDDLEFINGER.

MOVING ROOF DRILL UP. ROCK FELL FROM TOP, STRIKING EYE.

HE STRAINED HIS RIGHT ARM WHILE BOLTING IN HIGH TOP ON 3 LEFT. HE NOTIFIED COMPANY ON 4/16/02 THAT FAMILY PHYSICIAN HAD DIAGNOSED TORN ROTATOR'S CUFF (DIAGNOSED WITHOUT A POSITIVE X-RAY).

EE CLIMBED UP THE LADDER TO SPRAY THE DECK OFF. HE REACHED FOR A HAND HOLD AND GRABBED THE VALVE ON THE HOSE. THE HOSE CAME ON AND THE PRESSURE FROM THE HOSE HIT EE IN THE MOUTH.

AS EMPLOYEE WAS INSTALLING ROOF BOLT, A PIECE OF DRAW ROCK FELL FROM THE ROOF AND STRUCK HIS RIGHT FOOT, JUST BEHIND STEEL TOE. FRACTURE OF SMALL BONE ON TOP OF FOOT.

EE WAS TRYING TO TURN BLENDER ROTOR AROUND WHEN IT FREED ITSELF AND TURNED WEDGING HIS ARM INTO THE BODY OF THE BLENDER.

EE WAS TRAMMING ROOF BOLTER. AS HE WENT OVER A ROLL, THE REAR TRAM COMPARTMENT SUDDENLY RAISED CAUSING HIS HEAD TO STRIKE THE ROOF. THIS RESULTED IN A SPRAIN TO HIS NECK. DID NOT GO TO DR. UNT IL 1-20-00. DID NOT MISS WORK UNTIL 1-21-00.

EE WAS OPERATING ROOF BOLTER WHEN A ROCK FELL FROM THE ROOF AND STRUCK HIM IN THE FACE. RETURNED TO REGULAR DUTY NEXT SCHEDULED SHIFT WORK SCHEDULE MON-THURS. NOTIFIED BY EMERGENCY ROOM NURSE TODAY THAT LACERATION WAS SUTURED.

EE CAME LATE FOR WORK IN HIS RUSH TO CATCH UP HEFORGOT TO BUCKLE HIS SEAT BELT WHEN THE WENT OVER THE BENCH THE BLADE WENT INTO THE GROUND & HE WAS THROWN AGAINST THECAB, CUTTING HIS HEAD Y

EMPLOYEE STARTED SCRUBBER MOTOR ON CONTINUOUS MINER AND FOREIGN MATERIAL WAS BLOWN INTO HIS RIGHT EYE. OBJECT HAD TO BE REMOVED BY A PHYSICIAN AND HE RECEIVED PRESCRIPTION MEDICATION.(OF COURS E AS ALWAYS).

EE WAS ON ROOF BOLTER PUTTING UP CURTAIN BOARDS BOARDS FELL DOWN ON FINGER

THIS EE WAS INJURED SOME TIME AGO, ON 5-10-99 EE WENT TO THE DR. HE HAD OUTPATIENT SURGERY, THEN ABOUT 6-25-99, PAIN CAME BACK. CO. ELECTED FOR SECOND OPINION. SECOND DR. STATED THAT EE HAD AN ABCESS OF THE SURGERY AREA. DUE TO THE NATURE OF THE ABCESS, EE STARTED TO LOSE TIME.

EMPLOYEE WAS HOLDING ROOF BOLT ONTO ROOF BOLTER HEAD. WHEN HE STARTED AND UPLIFT TO INSERT BOLT INTO HOLE, HIS GLOVE GOT CAUGHT, FRACTURING AND DISLOCATING HIS FINGER(S).

FOOT JACK ON ROOF BOLTER APPARENTLY SETTING ON RAISED BOTTOM AS EE RAISED JACK FRONT OF ROOF BOLTER DROPPED CAUSING CANOPY TO STRIKE EE IN HEAD. WORKED AT REGULAR DUTIES UNTIL 2/8/99

EE WAS USING TORCH TO CUT DIVERTER PLATE WHEN SLAG POPPED AND STRUCK HIS RIGHT EYE BEHIS HIS CUTTING GLASSES. PRESCRIPTION MEDICATION USED FOR PREVENTIVE PUPOSES, AS ALWAYS WITH EYE PROBLEMS, SERIOUS OR NOT.

EMPLOYEE WAS PUSHING ROOF BOLT UP AGAINST THE ROOF AND THE BOLT BENT THEN BROKE CAUSING THE ROOF BOLT PLATE TO STRIKE THE EMPLOYEE ON THE NOSE.

EE WAS SUING CUTTING TORCH TO CUT METAL, WHEN A PIECE OF RUST POPPED FROM METAL AND STRUCK LEFT EYE, BEHIND GLASSES. PRESCRIPTION MEDICATION WAS USED--EXAMINATION OF EYE ALSO REVEALED EE HAD A ND EYE INFECTION UNRELATED TO INJURY.

EE WAS OPERATING A REMOTE CONTROL (RADIO) CONT MINER WHEN THE MINER CABLE WAS CAUGHT AGAINST THE ROOF. THIS PULLED THE CABLE CAUSING IT TO SHORT CIRCUIT AT THE JUNCTION BOX. THIS CREATED CONS ISDERABLE SMOKE. THE OPERATOR, WHO USES AN INHALER, SUFFERED BREATHING PROBLEMS FROM EXPOSURE TOTHE SMOKE.

COAL POPPED OFF THE RIB AND STRUCK EMPLOYEE'S EAR, CAUSING A LACERATION REQUIRING 6 SUTURES.

EE HAD TROUBLE WITH AUTOMOBILE, CAME IN LATE FOR WORK. WHEN HE WENT TO REPLACE HOLD OVER EE, HE PLACED HIM ON A DIFFERENT SIDE OF THE TWIN HEAD BOLTER THAN NORMAL. EE PUSHED THE WRONG LEVER. R ESULTING IN HIS HEAD BEING STRUCK BY THE BOLTER POT & ATRS.

EE WAS DRILLING A ROOF BOLT HOLE WHEN SMALL ROOFMATERIAL FELL AND ENTERED HIS RIGHT EYE(COMING OVER HIS SAFETY GLASSES)THIS IS REPORTABLE BECAUSES THE RX MED WAS USED STANDARD PROCEDURES FOR ALL DRS WITH ANY TYPE EYE PROBLEM. MSHA SHOULD RECONSIDER THIS REPORTABLE REQUIRMENT. WE DO HAVE AN EYE PROTECTION PROGRAM IN PLACE.

INJURED PERSON GOT GLOVE CAUGHT BETWEEN POT ON BOLTER AND BASE OF STARTED STEEL AND INJURED LITTLE FINGER ON LEFT HAND.

THE REEL ON THE LONG AIRDOX MOBIL DRILL WAS PUT IN AND THE VICTIMS FOOT WAS CAUGHT AND PULLED HIS KNEE.

EE WAS CLEANING OFF WORK BENCH AT SHOP, AND BLEW DUST OFF BENCH WITH AN AIR HOSE, AN DBLE WA SLIVER OF METAL IN HIS EYE.

EE WAS BURNING BEARINGS OFF SHAFT ON A D7 BULLDOZER FINAL DRIVE ASSEBLY THE DAY AFTER HE EXPERINCED A BURNING SENSATION IN HIS EYES WHITE USING THE CUTTING TORCH HE WAS WEARING CUTTING GOGGLES POSSIBLE THE GOGGLENS WER FAULTY.

WHILE HANGING THE CABLE FOR HIS MACHINE THE OPERATOR OF THE OTHER MACHINE WAS TRAMMING HIS MACHINE ACROSS THE SECTION AND HIS TRAILING CABLE CAUSED THE OPERATOR WHO WAS HANGING HIS CABLE TO FA LL.

EE WAS WATCHING THE MECHANIC GRIND ON THE PTO YOKE OF HIS GREASE TRUCK. HE THOUGHT HE WAS AT A SAFE DISTANCE, HOWEVER A SMALL METAL PARTICLE FLEW INTO AND BECAME LODGED IN HIS LEFT EYE. HE WAS UNAWARE OF THIS FOR 2 DAYS, UNTIL IT BECAME UNCOMFORTABLE TO HIM. HE WENT TO THE DR. AND A NEEDLE AND COTTON SWABS WERE USED TO RETRIEVE THE METAL OUT.

INJURED WAS BOLTING TOP AND HAD FINISHED UP. HE WAS BACKING HIS MACHINE OUT OF THE PLACE AND WAS DRAGGING HIS LEFT FOOT THE MACHINE WENT OVER A ROLL AND WHEN IT LEVEL OFF HIS FOOT WAS UNDER IT . HE WENT TO THE DOCTOR & HE SAID IT WAS BADLY BRUSHED AND NOT BROKE NO WHERE

EE WAS FIXING TO DRILL A HOLE TO PUT A BOLT IN & A PIECE OF ROCK FELL DOWN ON HIS LEFT HAND THE ATRS WAS SET IN PLACE & THE ROCK FELL DOWN BETWE EN IT ON HIS HAND

EMPLOYEE WAS CUTTING GRASS ON MINE SITE FOR A PRODUCTIVITY SAMPLE.WHILE HE WAS CUTTING THE GRASS A FOREIGN OBJECT HIT HIS EYE. RESULT WAS A SCRATCH TO HIS RIGHT EYE.

WHILE EMPLOYEE WAS INSTALLING POWER DIVIDER COUPLING HE GOT HIS FOOT CAUGHT IN THE SPIRAL OF THE AUGER HEAD RESULTING IN A BAD BRUISE TO HIS UPPER FOOT.

EMPL WAS JACKHAMMERING PIT,LIFTING JACK HAMMER OUT OF HOLE-PULLED MUSCLE IN LOWER BACK.

WHILE EE WAS USING TORCH TO CUT METAL HE BURNED HIS LEFT EYE.

ENDLOADER AND TRUCK COLLIDED(EXTREMELY FOGGY AND DARK AT TIME OF ACCIDENT)DRIVER OF TRUCK SUFFERED SCRAPES AND BRUISES AS NOTED UPON EXITING TRUCK.

WHILE EMPLOYEE WAS OPERATING AUGER A SMALL PARTICLE GOT IN HIS EYE AFTER GOING TO SEE A DR. IT WAS FOUND TO BE A SMALL PIECE OF METAL AND REMOVED.

EMPLOYEE RETURNED TO WORK FOR 1 DAY AND STATES HE REINJURED HIS BACK SAME AS PREVIOUSLY REPORTED ON 12-20-90.

EMPL REPAIRING WELDER WHILE CHECKING SOME WIRE CONNECTIONS,EMPL CAUGHT FINGERS IN FAN RESULTING IN CUT & BRUISING OF LITTLE AND RING FINGER RIGHT HAND.

EMPL GOT RT HAND CAUGHT BETWEEN DRIVE BELTS & PULLEY ON ELEC WINCH THAT PULLS RAIL CARS.