Buscar en el registro

RUST INSIDE HELMET OR BLOWN UP INTO HELMET.

TWO EMPLOYEES WERE REPLACING THE WING PULLEY ON THE BERM STACKER. BOTH ENDS WERE SUPPORTED WITH A CHAIN HOIST. EE RAISED HIS END AND THE HOIST CAME UNHOOKED SMASHING HIS HAND BETWEEN THE PULLE Y SHAFT AND THE CONVEYOR FRAME.

EMPLOYEE WAS USING AN OVERHEAD HOIST TO MOVE A STEEL PLATE. HE HOOKED HOIST DIRECTLY TO PLATE, THE HOOK SLIPPED AND THE PLATE STRUCK HIS ELBOW CUTTING IT.

EE WAS WELDING ON A PIPE AND HE CHIPPED THE WELD AND GOT A PIECE OF SLAG IN HIS EYE. WASH EYE OUT WITH BUFFERED USUHING SOLUTION. EE THAN WENT TO HOPSITAL TO GET CHECK OUT BETTER. AFTER TAIL T O EE ON 1-6-99 WITH EE WE FOND OUT THAT HE HAD TO SEE EYE DR. THREE TIME TO CHECK FOR INFLICTION. THIS IS WHY THIS REPORT IN LATE.

EE WAS STANDING ON AN ELEVATED WALKWAY BEHIND A HANDRAIL, MIDRAIL AND TOEBOARD. EE WAS ASSISTING A CRANE OPERATOR BY SPOTTING A SUSPENDED COUNTERWEIGHT FOR A CONVEYOR TAKEUP PULLEY. ONE OF THE TWO CHAIN BOLTS USED TO SUSPEND THE COUNTERWEIGHT BROKE, CAUSING A VERY LOUD NOISE. EE PANICKED AND JUMPED OVER THE HANDRAIL AND LANDED APPROX. 20' BELOW, BREAKING HIS LEFT HEEL.

OVERSIZED CHUTE HAD PLUGGED. MEN DECIDED TO CUT INSPECTION HOLE IN CHUTE TO SEE WHAT WAS NEEDED TO UNPLUG IT. AFTER MOST OF THE HOLE WAS CUT THE PRESSURE OF ROCK AGAINST THE STEEL BROKE LOOSE & STEEL FELL ON LEG CUTTING KNEE. TOOK 17 STITCHES TO REPAIR KNEE.

EE WAS GRINDING WELDS OFF OF A TRUCK APRON WHEN SPARKS STRUCK THE BED AND BOUNCED UP UNDER HIS SAFETY GLASSES. THE SPECK OF METAL BECAME IMBEDDED IN HIS RIGHT EYE.

DRILL OPERATOR WAS CHANGING SHAFT INTO HIS DRILL AS. HE LOWERED DRILL DRIVE MOTOR AND SHAFT AT A SLOW ROTATION. HE WAS GUIDING THE SHAFT WITH LEFT HAND, OPERATING CONTALK WITHHIS RIGHT HAND. A S HE SHAFT ENTERED THREADED END OF STATIONARY SHAFT OPERATOR PINCHED MIDDLE FINGER AND RING FINGER IN THREADS. LACERATION/PINCHED FLESH

EE WAS STANDING APPROX 15' FROM A MOVING TRUCK. MOUNTED PRIMARY CRUSHER WHILE IT WAS BEING POSITIONED IN THE QUARRY. A ROCK WAS CAUGHT BETWEEN THE TRACK AND DRIVE SPROCKET. THE ROCK WAS CRUSHE D BETWEEN THE TRACK AND SPROCKET, CAUSING TWO SMALL PIECE OF ROCK TO HIT EE IN THE CHEST. ONE OF THE ROCKS CUT THROUGH EE'S CLOTHING AND SKIN.

SLIPPED ON MUD. PUT HAND ON WELD.

AFTER HE GOT DONE DRILLING A HOLE HE LET HIS JACKS DOWN AND THE DRILL WENT OVER THE WALL.

DRILLER AND CONTRACT BLASTER WERE FINISHING DRILLING A SHOT. WHILE STANDING BEHIND THE DRILL A SECTION OF THE HIGHWALL SLID AND EMPLOYEES JUMPED OVER TO SOLID GROUND.

EE WAS PRYING BELT SCRAPER UP SO OTHER COULD CUT A NOTCH IN SCRAPER HANGER WHEN OTHER WITH LIT TORCH IN ONE HAND ATTEMPTED TO HELP HIM PRY IT UP MORE WITH HIS OTHER HAND AND THE TORCH CAME IN CONTACT WITH EE LEG BURNING HIM.

CUTTING STEEL WITH A TORCH.TORCH TURNED WHEN IT WENT TO GET ANOTHER PIECE OF STEEL TO CUT.TORCH TIP TURNED AND WENT OVER TOP OF LEFT HAND.

EMPLOYEE WELDING RAIL ON NEW CONVEYOR - LEANED OVER RAIL THAT HAD JUST BEEN WELDED TO WELD ANOTHER AREA AND ARM TOUCHED HOT AREA AND BURNED IT. THE BURN WAS 2ND DEGREE BURN ABOUT THE SIZE OF A GOLF BALL ON LEFT UPPER ARM.

SHEAVE ON 250 HP MOTOR WAS FROZE ON AND HAD TO BE SPLIT BY CUTTING IT WITH AN AIR ARC. A WHEEL/PULLEY PULLER WAS THEN USED. WHEN THE SHEAVE FINALLY BROKE LOOSE, IT CAME WITH SUCH FORCE STRIKIN G EE IN HEAD. EE REQUIRED 5 STITCHES ABOVE HIS LEFT EYE.

EMPLOYEE WAS ASSISTING WELDERS REPAIR JAW CRUSHER FEEDER AND RECEIVED WELDERS FLASH TO HIS RIGHT EYE.

TURNED ON IMPACT WRENCH AND SHORT END OF HANDLE WENT INTO I.NAME HAND.

HOIST MOTOR IN MILL BEING REPLACED USING BLOCK AND CABLE TO LIFT MOTOR UP 30' INTO MILL.I.NAME GUIDING CABLE WITH HAND INSTEAD OF USING WOODEN GUIDE HAND WAS PINCHED BY BLOCK.

MUD ON DRILL STEEL LIFTED STEEL COLLAR ABOUT 3 FEET, COLLAR CAME LOOSE FALLING ON FINGER AS DRILLER WAS TRYING TO LINE UP DRILL STEEL. CUT DFINGER, REQURING STICHES.

INDIVIDUAL WAS CHIPPING OFF SLAG FROM BURNED METAL. PIECE OF SLAG DISLODGED & WENT UP UNDER SAFETY GLASSES & INTO EYE.

WHILE RAISING A LARGE STONE WITH A ROCK HOOK, THAT WAS HUNG ON A OVERHEAD ELECTRIC HOIST, THE 5/8" STEEL CABLE BROKE AT THE TOP OF THE EYE. THE CABLE APPEARED TO HAVE SEVERAL BROKEN STRANDS O F WIRE AT THE TOP OF THE EYE. THE WEIGHT OF THE HOOK AND MAYBE THE ROCK ALSO PULLED HIS LEFT HAND INTO THE HANDRAIL WHERE IT WAS PINCHED BY THE HANDLE OF THE HOOK. PINCHING THREE FINGERS.

WHILE USING A H2DRAULIC PRESS A LARGE STEEL BLOCK WEIGHING APPROX 20 LBS FELL ON TO EMPLOYEES FOOT CUTTING THROUGH SHOE SOCK FLESH AND TO THE BONE DID NOT APPEAR TO BE SERIOUS UNTIL INFECTION SET IN 3

HAND GRINDER JU4PED OFF OF STEEBEAM & CUT LEFT THIGH (10 STITCHES).

TRYING TO DISLO8GE STOVE , STUCK IN CRUSHER ABRASION TO FOREHEAD.

GRINDING IN SHO1 WITH DIE GRINDER.MAKING REPAIRES ON FEED PLATE WHEN SPECK OF METAL GOT BEHIND SAFETY GLASSES AND LODGED IN EYE.

LAYING GRINDER 8OWN, ACCIDENTALLY KNICKED LEFT FOREARM.

OUR MAN WAS WELDING WITH BUILDUP-ROD ON OUR ROLL CRUSHER & RECEIVED FLASH BURN ON HIS FOREARMS & STOMACH

CUT LEG WHILE WORKING IN THE SHOP SAWING SOME BOARDS