Buscar en el registro

MILL OPERATOR TRIED TO REMOVE A LODGED ROCK FROM A RUBBER IMPACT TROUGHING ROLLER, WHICH PREVENTED THE ROLLER FROM TURNING. THIS RESULTED IN A BRUISED HAND.

WHEN HE WAS GETTING OUT OF MANLIFT, HE STEPPED OUT OF MANLIFT INTO A TRENCH AND TWISTED HIS LEFT ANKLE. HE WENT TO WOOD COUNTY HOSPITAL AND GOT AN X-RAY.

EE WAS FUELING UP LOADER AT THE END OF HIS SHIFT, HE HAD ONE HAND ON THE LOADER AND ONE HAND ON THE FUEL HOSE. EE WAS GETTING OFF THE LOADER WHEN HE SLIPPED OFF THE LADDER OF LOADER & FELL BAC KWARDS HITTING HIS BACK ON THE GUARD RAIL.

LOADER OPERATOR WAS WALKING TOWARD THE PRIMARY CRUSHER. HE STEPPED ON UNEVEN FROZEN GROUND AND HIS RIGHT ANKLE TWISTED/ROLLED, CAUSING A SPRAIN/FRACTURE TYPE INJURY. EE STATED THAT HE HAS HAD SOME HISTORY OF PROBLEMS WITH THIS ANKLE.

EMPLOYEE STATES: MOVING A BOOM USING MY LEGS FOR LEVERAGE AND WHILE PUSHING THE BOOM WITH MY UPPER BODY, FELT PAIN IN BACK.

EMPLOYEE WAS REMOVING A SECTION OF CATWALK. HE CRAWLED UNDER THE CATWALK AND CUT THE SUPPORT BOLTS, ALLOWING THE SECTION TO FALL ON HIM.

EE WAS ENTERING THE D8 BULLDOZER AND CLOSED HIS RIGHT MIDDLE FINGER IN THE CAB DOOR. THE FINGER WAS CUT AND REQUIRED 7 STITCHES TO REPAIR.

SLIPPED OFF 8' LADDER, FALLING APPROXIMATELY 5', LANDING ON RIGHT HAND.

EE HAD CLIMBED ON A CONVEYOR TO DISLODGE SOME BERM STONE FROM A HOPPER. APPROX. 4' HIGH. WHEN FINISHED JUMPED FROM CONVEYOR. MIDDLE FINGER ON RIGHT HAND CAUGHT ON UNKNOWN OBJECT. FINGER FRACTU RE AND SOFT TISSUE INJURY RESULTED (FINGERTIP & NAIL).

EE WAS HELPING THROW TWO USED WASH PLANT SCREENS INTO A DUMPSTER. THE SCREENS WERE FOLDED IN HALF. WHEN THE EE PICKED UP THE SCREENS THEY SUDDENLY UNFOLDED, CUTTING THE INJURED EE'S LEFT THUMB .

TWO MEN WERE CHANGING TOGGLE BLOCKS ON PRIMARY JAW. THEY WERE TAKING THE NUTS OFF OF THE TENSION ROD, THE ROD SNAPPED PROJECTING THE SPRING WASHER INUT AND THE BUSTENED OFF. ONE MAN EE, WAS ST RUCK ON FOREHEAD. HE WAS TAKEN TO HOSPITAL AND RECEIVED 8 STITCHES.

EE AND COWORKER WERE TRANSPORTING AND RELEASING A NON-RUNNING EUCLID HAUL TRUCK ON SITE. EE RELEASED HIS SIDE A LITTLE BEFORE COWORKER COMPLETED RELEASING THE RATCHET BINDER AND CHAIN ON HIS S IDE TO ALLOW THE AXLE AND WHEEL ASSEMBLY TO LOWER TO THE BLOCKING BENEATH THE RIGHT FRON TIRE. WHEN IT WAS FULLY RELEASED, THE TRUCK MOVED FORWARD AND TO THE RT. WHEN IT MOVED IT CAUGHT EE'S

EMPLOYEE SPRAINED LOWER BACK WHILE LOADING SHOT.

RUST INSIDE HELMET OR BLOWN UP INTO HELMET.

TWO EMPLOYEES WERE REPLACING THE WING PULLEY ON THE BERM STACKER. BOTH ENDS WERE SUPPORTED WITH A CHAIN HOIST. EE RAISED HIS END AND THE HOIST CAME UNHOOKED SMASHING HIS HAND BETWEEN THE PULLE Y SHAFT AND THE CONVEYOR FRAME.

WHILE LIFTING WASHER, CHAIN LEG BROKE, RESULTING IN WASHER FALLING ABOUT TWO FEET. WHILE LIFTING WASH WITH LOADER, EE WAS TURNING WASHER TO GET IT IN THE GARAGE, WHEN CHAIN FAILED AND WASHER F ELL TO GROUND. A 2" X 2" ANGLE IRON BROKE LOOSE AND STRUCK EE ALONGSIDE OF FACE & HEAD.

EMPLOYEE WAS REMOVING PIECE OF ASPHALT FROM DE-ENERGIZED CONVEYER, WITH ONE HAND. IN TURN HE SUFFERED A BICEP TENDON STRAIN.

OPERATOR WAS LIFTING A DRILL HAMMER TO PUT IN TOOL BOX WHEN HE FELT A PAIN IN HIS BACK.

EMPLOYEE WAS USING AN OVERHEAD HOIST TO MOVE A STEEL PLATE. HE HOOKED HOIST DIRECTLY TO PLATE, THE HOOK SLIPPED AND THE PLATE STRUCK HIS ELBOW CUTTING IT.

EE WAS STANDING ON A WALKWAY. AS HE TURNED TOWARD HIS WORK HIS LEFT KNEEE TWISTED CAUSING DISCOMFORT (1/30/01). NO MEDICAL TREATMENT UNTIL 2/10 WHEN X-RAY TAKEN. SAW DOCTOR ON 2/17 & HAD FLUID REMOVED & PLACED ON RESTRICTED DUTY.

WHILE LIFTING A SHEET OF STEEL, HERNIA TO LEFT SIDE. DID NOT MISS ANY WORK UNTIL 10/23/01. RETURNED TO WORK 11/5/01. NINE MISSED DAYS TOTAL DUE TO SURGERY.

EE WAS FUELING UP AND WALKING AROUND THE FUEL PUMP WHEN HE SLIPPED ON THE ICE. HE ENDED UP DOING THE SPLITS AND PULLING HIS GROIN.

EE WAS WALKING ON FRESHLY PLOWED ROAD AFTER SNOWFALL, SLIPPED ON ICY PATCH, LANDED ON BACK. CAUSING SORE BACK & STIFF NECK. DRS' INSTRUCTIONS WEIGHT RESTRICTIONS, 20 PDS, & NO PUSHING OR PULLI NG BENDING OR STOOPING

EE ALLEGES TENDERNESS TO HIS BACK FROM BEING JOSTLED IN THE HAUL TRUCK WHILE SHOT ROCK WAS BEINGLOADED WE ARE CURRENTLY EVAULATING THE CLAIM TO DETERMINE IF THE ALLEGED INJURY IS WORK RELATED

A SKID-LOADER OPERATOR & LABORER WERE CHANGING ATTACHMENTS ON THE BOBCAT. THE OPERATOR HAD THE BUCKET TIPPED UP ON ITS FRONT PARTIALLY AS A THE SECOND LOCK PIN WAS DISENGAGED, THE BACK OF THE BUCKET DROPPED DOWN STRIKING THE LABORER'S FOOT. EE WAS WEARING STEEL TOED SAFETY SHOES.

SOMETIME BETWEEN 5PM ON 10-20-00 AND 7 AM ON 10-21-00 AN ELECTRICAL FIRE OCCURED IN THE PRIMARY PLANT MCC BUILDING. NO COMPANY PERSONNEL WERE ON SITE. AT THE TIM EOF THE FIRE.

EE WAS CHANGING AN ANVIL ON ISC CRUSHER & STUCK IT WITH A HAMMER A CHIP BUSTED OFF THE HAMMER STRIKING EE IN THE CHEEK REQUIRED 4 STITCHES

SHOWING DIVISION MANAGER THE PARTS ON THE HAZEMAG THAT NEEDED REPAIR. PINKIE FINGER WAS CRUSHED ROTOR AND IMPACT PLATE.

WHILE SERVICING BRAKES ON A QUARRY SERVICE TRUCK, THE MECHANIC PINCHED HIS LITTLE FINGER (RIGHT HAND) BETWEEN THE BRAKE ROTOR AND THE WHEEL HE WAS REMOVING. THE MECHANIC WORKS FOR SE JOHNSON C O, PARENT COMPANY OF STONECO INC AND WAS WORKINGON THE QUARRY SERVICE TRUCK.

I WAS WALKING ALONG THE SHOT BENCH AND STEPPED ON A ROCK AND TWISTED MY ANKLE.

EMPLOYEE WAS DRIVING A HAUL TRUCK TO DUMP SITE AND HIT A BUMP IN ROAD. WHEN HE HIT THE BUMP HE TURNED WRONG AND HURT HIS BACK.

EMPLOYEE WAS ADJUSTING THE COUNTERWEIGHT WHEN HE LOST HIS GRIP AND FELL FROM THE CONVEYOR FRAMEWORK. EE FRACTURED HIS WRIST.

EE WAS CUTTING THE CORNERS OF A CONVEYOR BELT WHEN THE KNIFE SLIPPED AND CUT HIS RIGHT LEG ABOVE THE KNEE.

AT THE END OF HIS SHIFT, WHEN EXITING DOZER, EE STEPPED OFF INTO A HOLE. HE SLIPPED AND FELL ON HIS RIGHT ELBOW, FRACTURING IT.

EE WAS WORKING AS A PRIMARY/FACE LOADER OPERATOR. WHEN ENTERING THE MUCK PILE, HE HIT A LARGE ROCK AND JARRED HIS BACK. THIS IMPACT CAUSED LOWER BACK PAIN AND MUSCLE SPASIMS. THIS IS AN AGGRIV ATION OF A PREVIOUS INJURY.

WHILE CHANGING CONVEYOR IDLERS, SMASHED RIGHT MIDDLE AND RING FINGER BETWEEN NEW IDLER AND CONVEYOR APRON.

DRIOE OUECE NETAK ON TOP OF FOOT.

TRIPPED AND FELL ON LEFT KNEE. BRUISED/CONTUSION OFF WORK 1 DAY- 11-13-99 SATURDAY.

EMPLOYEE WAS PULLING THE LEVER TO OPEN S.57 STORAGE BIN WHEN THE GATE JAMMED, JERKING HIS BACK. ON 08/02/99, HE SWITCHED JOBS AND PRECLUDED THATTHE CONSTANT SITTING AND BOUNCING IN A NEW LOADE R IRRITATED HIS LOWER BACK AND CAUSED PAIN TO RUN DOWN HIS LEG. IN 1994, EMPLOYEE SUFFERED A SIMILIAR LUMBAR STRAIN WHILE DRIVING A TRUCK WHICH INDICATES A REPORTABLE PRE-EXISTING CONDITION.

EE WAS WORKING BEHIND THE WELD SHOP REPAIRING A SAND SCREW. AS HE PICKED-UP A 10# PLATE FOR THE SCREW SOMETHING SNAPPED AT THE BASE OF HIS THUMB.

EMPLOYEE WAS WALKING TO THE FRONT ENTRANCE TO UNLOCK THE CUSTOMER DOOR. APINE CONE DROPPED ONTO THE SIDEWALK FROM A NEARBY PINE TREE. EMPLOYEE STEPPED ON THE CONE, ROLLING HER ANKLE OUTWARD, C AUSING A SPRAIN/FRACTURE INJURY OF RIGHT ANKLE.

WHILE RETURNING TO LOADING AREA, TRUCK DRIVER LOST CONTROL OF HIS TRUCK AND LEFT ROADWAY. THE TRUCK PASSED THROUGH LOWER BEEM, AND CAME TO A STOP. OPERATOR STRUCK HIS HEAD INSIDE THE CAB CAUSING CUTS THAT REQUIRED SUTURES.

OPERATOR COMPLAINED OF SORE SHOULDER FROM DIGGING WITH END LOADER HE WAS NOT RESTRICTED TO DUTY UNTIL 8/16/99

EMPLOYEE WAS HAMMERING OUT THE LAST BOLT ON A CUTTING EDGE. HE WAS STANDING WITH HIS LEFT FOOTUNDER THE CUTTING EDGE WHEN THE BOLT CAME FREE AND THE CUTTING EDGE FELL.

EE WAS GOING TO STRAIGHTEN 2, V-BELT ON THE SHEIVS. RATHER THAT LOOSING THE MOTOR TORNING THE V BELTS AN THEN TIGHTENING THE MOTOR UP AGAIN. THEY TRIED TO TURN IT BY ROLLING THE PULLIES. THE W AS WHEN HIS RIGHT HAND WAS CAUGHT IN THE PULLEY.

WHILE REMOVING CENTER PIN ON SHOVEL AND LANCING AN OPENING, A FIRE STARTED ABOVE THE CAR BODY AND BELOW THE REVOLVING FRAME. FIRE SOURCE WAS THELANCING AND THE IGNITION SOURCE WAS GREASE. FIRE WAS CONTAINED TO THIS AREA. DAMAGE WAS LIMITED TO ELECTRICAL WIRING. TOWNSHIP FIRE DEPT. RESPONDED AND EXTINGUISHED THE FIRE. NO INJURIES OR ILLNESSES WERE INVOLVED.

EE WAS CHECKING TO SEE IF HIS HEATER WAS WORKINGAND HE PUT HIS FINGER UP INTO VENT THE FAN WAS RUNNING & CUT HIS FINGER

EE WAS WELDING ON A PIPE AND HE CHIPPED THE WELD AND GOT A PIECE OF SLAG IN HIS EYE. WASH EYE OUT WITH BUFFERED USUHING SOLUTION. EE THAN WENT TO HOPSITAL TO GET CHECK OUT BETTER. AFTER TAIL T O EE ON 1-6-99 WITH EE WE FOND OUT THAT HE HAD TO SEE EYE DR. THREE TIME TO CHECK FOR INFLICTION. THIS IS WHY THIS REPORT IN LATE.

TRUCK DRIVER WORKING ON THE SHOT (ANFO BULK TRUCK OPERATOR WORKING FOR NORTHERN OHIO EXPLOSIVES) WAS REMOVING FLEXIBLE HOSE FROM THE BULK AUGER. AS THE HOSE WAS BEING REMOVED THE END STRUCK TH E OPERATOR IN THE LIP CUTTING IT. THE OPERATOR TAKEN TO HOSPITAL WHERE 7 SUTURES WERE NEEDED.

EE WAS CLIMBING THE LADDER TO THE TOP OF THE ROOF WHEN METAL DUST FROM THE NEW BUILDING BLEW INTO HIS EYE. EE WAS WEARING SAFETY GLASSES.