Buscar en el registro

Employee went to tighten rock drill bit back up and collar closed on left thumb causing it to be caught between collar and bit.

Employee was removing a 50 lb. bag from the roller conveyor and cut employee's ring finger on employee's right hand. Required 3 stitches.

EE was welding overhead on a chute in the Mill. EE stated while welding,sparks were falling on his shield and one came inside and under safety glasses into his right eye.4-29-08 he went to eye doctor and had a piece of welding slag drilled out.EE went for a follow up visit 4-30-08 No Lost Time

Employee was welding on the Mill 1 dryer, wearing safety glasses and a splinter piece of slag entered his eye.

Employee stated that he was grinding metal at his work station with a hand held grinder. As he was grinding he felt something in his left eye. He thought it was okay but on 4-11-08 he started to feel pain. He went to the E R and then to Doctor at Watertown Eye Center to have a piece metal remove from the eye. No lost time.

Employee was helping an electrician adjust a limit switch under a stretch wrap table. While turning the table by hand, his finger was caught between the table edge and the table roller. His right ring finger was cut and broken. He began missing time on 11-07-07.

Employee was stretchwrapping double stacked 1000lb super sacks. The top sack slipped off of the turn table bumping the employee into the control panel. He thought it was ok and finished the shift. The next day he experienced pain while breathing and coughed up blood. He went to the ER and was given an off work slip because of a bruised lung.

May 5th EE went to physician because he thought he had kidney stones. MD put EE on medication. On May 23rd physician took EE off work because of possible bone spur on lower spinal cord.

EMPLOYEE WAS WELDING ON #2 HARDING DUST LINE, SLAG HIT AND BURNED LEFT FOREARM. FOREARM BECAME INFECTED AND EMPLOYEE WENT TO SEE DOCTOR ON SUNDAY MAY 18TH. REPORTED LOST TIME AS OF MONDAY MAY 19TH.

EMPLOYEE PUT HIS HAND ON A BAG ON THE DECK TO ADJUST A BAG. HIS HAND SLIPPED OFF BAG ONTO THE ROLLERS, CUTTING HIS MIDDLE FINGER ON HIS RIGHT HAND. HE RECEIVED 8 STITCHES.

EE WAS OPERATING THE PETRO BLENDER IN THE GAYCO AREA. AFTER HE LOADED THE BLENDER 1/2 FULL WITH CLAY HE NOTICED THE SCALE READING WAS DROPPING HE NOTIFIED HIS FOREMAN WHO CAME DOWN TO CHECK. HE ASKED EE TO OPEN DOOR SO THEY COULD LOOK INSIDE. WHEN EE OPENED THE DOOR, THERE WAS A PRESSURE BUILT UP WHICH HAS NEVER HAPPENDED, THROWING THE DOOR OPEN STRIKING EE ON FACE/RESPIRATOR, CUT

EE WAS GRINDING THE CRACKS OUT OF A PUMP HOUSING DUST OR CAST IRON FORMED A FINE DUST AND ENTERED THE EE S EYE CAUSING THEM TO BE IRRITATED. HE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS STRETCH WRAPPING LARGE PALLETS (78 BAGS EACH). AS HE STARTED THE MACHINE THE PALLETTIPPED AND STRUCK HIM IN THE RIGHT SHOULDER, KNOCKING HIM TO THE FLOOR.

EE WAS WASHING MUD OFF A METAL ROOF USING A PRESSURE WASHER. HE SLIPPED ON THE MUD, THREW HIS LEFT HAND IN FRONT OF THE PRESSURE WASHER DISCHARGE TIP WHILE THE UNIT WAS DISCHARGING. THE FORCE OF THE WATER PUNCTURED EE'S LEFT HAND TRIGGER FINGER.

EE WAS CUTTING WOOD, A PIECE OF SAWDUST WAS AROUND EYE AREA, WHICH EE DID NOT KNOW AT THE TIME, WHILE DRIVING BACK TO PLANT THE SAWDUST FELL INTO EE'S RT EYE. HE RUBBED IT OUT. THE DUST INFECT ED HIS EYE.

EE WAS OPERATING BAGGER. A FILLED BAG EXITING LOADING POSITION, LANDED ON CONVEYOR UNDERNEATH PACKER. THE BAG REMAINED IN AN UPRIGHT POSITION ON ITS EDGE, ALLOWING THE EE'S FOOT TO BE CAUGHT B ETWEEN TWO BAGS. THE EE'S KNEE WAS TWISTED AS THE BAGS MOVED ALONG THE CONVEYOR.

EE WAS DRILLING INTO CONCRETE WALL WITH PORTABLE DRILL MOTOR, AS HE APPLIED PRESSURE THE BIT LOCKED DOWN BINDED AND JERKED THE DRILL OUT OF THE EE S HANDS AS THIS OCCURRED THE DRILL MOTOR STRU CK THE EE ON THE CHIN CAUSING A LACERATION EMERGENCY ROOM DR SUTURED THE CUT EE RETURNED TO WORK SAME DAY.

WELDING CHIPPING SLAG ON 1100 LEVEL CRUSHER PIECE OF WELDING SLAG ENTERED RT EYE

SOCKET CAME OFF IMPACT WRENCH & HIT EMPLOYEE IN MOUTH KNOCKING OUT THREE TEETH

RETAINING NUT FOR LEAD SCREW ON COMPOUND BILL BACKED OFF BORING BAR AND DRIVE MOTOR DROPPED MASHING LITTLE FINGER ON R HAND

INJURED WAS PALLETIZING 50LB BAGS OF TALC WHEN HE TWISTED TO PLACE BAG ON THE PALLET HE FELT BACK & NECK PAIN & ABSENCE OF FEELING IN THE LEFT ARM LOST TIME BAGAN 05-12-91

CUTTING MINE TIMBER- GOT WOODEN FIBER IN RIGHT EYE. GOT IT REMOVED AFTER SHIFT.

INJ CUTTING METAL WITH TORCH OVERHEAD,PIECE OF SLAG ENTERED LEFT EYE.

REACHED OVER PALLETIZER BAG CONVEY. ELEVATOR TO REMOVE P C OF TORN PAPER BAG MOVING R ARM BACK HIS LONG SLEEVE SHIRT CUFF GOT CAUGHT BETWEEN ROLLER AND BELT PULLING ARM UNDER ROLLER

EMPLOYEE WAS ATTEMPTING TO CHECK CONVEYOR BELT SPEED ON PALLETIZER DIVERTER GATE TAIL PULLEY WHEN THE DIVERTER GATE SWITCHED POSITIONS AND CAUGHT LEFT HAND IN GATE STOP.

INJURED CLAIMS HE WAS CUTTING A STEEL CONE WHEN THE STEEL CONE WAS CUTTING THROUGH THE STEEL SPRUNG OUTWARD DUE TO TENSION STRIKING INJUREDS RIGHT FOOT

INJURED WAS PREPARING AIR GRINDER TO GRIND OFF WELDED SURFACE OF 700 CRUSHER THERE WAS W ATER IN THE AIR LINE SO THE INJUR ED W AS RUNNING THE GRINDER TO R EMOVE THE WATER THE DISC CAME APART LACERATING HIS LEFT ARM

WAS USING CLAY 8PADER WHEN HE JAMMED THE TENDON IN RT WRIST CAUSING TENOSYNOVITIS

INJURED CLAIMS 2E WAS CLEANING OFF SHELVES WHEN THE HEATER BLOWER BLEW DUST IN HIS RIGHT EYE

INJ MUCKING FRO4 700M3 X-CUT WHEN LOOSE MUCK BROKE DOWN FROM DRAWPOINT STRIKING INJ ON RIGHT FOOT CAUSING SOFT TISSUE INJURY TO RIGHT SHOULDER WHEN HE TRIED TO AVOID INJURY.

MAINTENANCE MEC2ANIC WAS PREPARING A MG-AL DOCK PLATE FATIGUE CRACK FOR WELDING. HE WAS USING A CARBIDE TIPPED SKILL SAW WITH THE GUARD BASE REMOVED. THE SAW STUCK IN THE CRACK AND KICKED BACK AGAINST HIS RI1HT THIGH. HE SUFFERED A LACERATION FROM THE SAW BLADE IN HIS THIGH MUSCLE REQUIRING MINOR SURGERY.

HE WAS CUTTING A PIECE OF 6" I-BEAM WITH THEE POWER HACKSAW. THERE WAS APPROX A 6\ PIECE OF BEAM PROTRUDING FROM THE SAW. THE PIECE WAS NOT BEING SUPPORTED BY ANY TYPE OF STAND OR REST. WHEN THE SAW HAD FINISHED ITS CUT THE BEAM FELL & STRUCK YOUNGS ON THE INSTEP OF T HE ELFT FOOT. THE INJURED WAS EXAMINED X-RAYS WERE TAKEN & THE FRACTURE DIAGNOSED. ESTIMATED DISABLIY WILL BE

LECLAIR WAS DRILLING PIN HOLES WITH A LEROY DRIL& LEG HE WAS IN A TIGHT AREA ANDE WHEN COLLRING A HOLE MACHINE SLIPPED OF LECLAIR SHUT OFF AIR WITH NO AIR THE LEG RETRACTED AND STARTED TO FALL DOWN RAISE HE THEN TURNED TO CATCH MACHINE AND TURNED IN A ODD ANGLE AND PULLED SOMETHING IN HIS BACK

WHILE MUCKING WITH AN EIMCO 21 IN CLOSE PROXIMITY TO THE RIB, HE WAS IN THE RETREAT MOTION WHEN HE TURNED THE EIMCO TO THE LEFT CAUGHT HIS RIGHT ARM BETWEEN THE CONTROLLER AND THE SIDE WALL CAUSING THE FRACTURE OF THE WRIST.