Buscar en el registro

EE grabbed a spinning bolt with bare hands and cut EE's left middle finger.

EE had a hole saw slip off a junction box and cut EE's left forearm.

Cutting threads off a wedge bolt jaw crusher with a cut off wheel on a grinder; EE was wearing glasses and a shield but metal was in left eye. Employee did not request medical treatment until 10/22/21

EE was cutting with torch and hit head on bottom of screen deck

Small rock fell and was stuck in ear canal.

EE was welding and metal went into left eye

EE was drilling a hole when the drill kicked back striking EE in the nose. EE was not diagnosed w/a fracture until 11/1/18

EE was cutting angle iron and the blade broke off cutting right leg.

air chisel tip broke and embedded in left shin

Welding and something went behind safety glasses in eye

welders flash

welders flash

Welding piece of metal went behind safety glasses in right eye.

EE was working and a rock flew out of the crusher and hit EE in the head.

EE got foreign object in ear.

Employee sustained contusions to hip, knee and low back when crane stalled and tipped over.

Employee welding and received injury to eyes

Employee tracking across rough terrain and jarred back, sustaining low back strain.

EE was welding pipes and felt pain in his low back.

Struck on left thumb by rock which had jammed in crusher; sustained fracture of left thumb.

Grinding on crusher with safety glasses, developed rust ring in eye.

Emp was welding and a piece of steel fell off the lip onto left foot.

Large rock fell from the top of the crusher /feeder on to the grizzly below where the man was working and hit him on the Left elbow causing contusion and swelling of arm.

Emp was welding/grinding on the bottom deck of front plant and a piece of metal flew into right eye.

Emp bent down to pick up a digging bar and backhoe operator didn't see him, swinging bucket around hitting him in lower back.

Employee was cut on left finger by band saw blade while cutting allen wrench (stitches required).

emp was screwing plywood to the wall when the screw kicked out and the bit struck knuckle.

Employee working on crusher using torch. Climbing down off crusher, torch passed over hand.

EMPLOYEE WAS CUTTING STEEL. A PIECE OF SLAG GOT INTO HIS EYE.

GRINDING ON A CLAMP TO WELD, THE GRINDER SLIPPED AND CUT HIS FINGER.

DRILLING HOLES FOR BLASTING; DRILL STEEL WAS STUCK. STRIKER BAR BROKE; A PIECE OF STEEL HIT EMPLOYEE IN THE FACE.

EMPLOYEE WAS FIXING PIPE AT BOOSTER PUMP. BACKHOE OPERATOR SWUNG TO THE RIGHT; THE BUCKET DID NOT STOP. IT HIT HIS HAND AND ELBOW.

EE WAS DISMANTLING PORTABLE CRUSHER, GETTING READY TO TRAVEL. LAYING DOWN FEEDER WALL. EE WENT INTO CRUSHER TO SECURE WALL. WALL FELL, PINNING BOTH ANKLES AGAINST FEEDER WALL.

SHARPENING DRILL BIT WITH HAND GRINDER, SPARKS CAME UP IN FACE. PIECE OF METAL GOT IN EYE. WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS CHECKING OUT VIBRATIONS IN PUMP. HE PUT ONE HAND ON ELECTRIC VALVE & THE OTHER HAND ON DISCHARGE PIPE.

USING PRESSURE WASHER TO WASH COMPANY TRUCK.

BURNING STEEL, RUST POPPED UNDER SAFETY GLASSES.

EE WAS GRINDING ON STEEL BEAM WITH HAND GRINDER WAS WEARING SAFETY GLASSES STILL GOT DIRT IN LEFT EYE.

EE WAS ATTEMPTING TO REMOVE SAFETY BLOCKS FROM HYD. CYLINDER OF CRUSHER. INSTEAD OF DECREASING PRESSURE, HE INCRESED PRESSURE AND CRUSHED BLOCK. BLOCK FLEW OUT AND HIT EE IN ABDOMEN.

EE WAS USING ELEVCTRIC GRINDER ON METAL STEPS, PIECE OF PART OR METAL FLECK FLEW UP UNDER SAFETY GLASSES INTO RIGHT EYE WENT TO HOSPITAL TO HAVE IT REMOVED. '

EE CHANGING CUTTING EDGE ON 966 LOADER BUCKET. REMOVING BOLTS FROM CUTTING EDGE, HAD LEFT HAND UNDER CUTTING EDGE. BOLT DROPPED WHILE AIR GUN WAS STILL SPINNING. BOLT HEAD CUT THROUGH WORK GLO VE AND CUT INTO FINGER.

EE WAS OPERATING BACKHOE IN GUARD. BUCKET PIN FELL OUT. STEPPED OFF MACHINE TWISTED RIGHT ANKLE.

EE WENT INTO SURGE TUNNEL TO WELD ON CENTRON SHUTE. WENT INTO SHUTE, STARTED WELDING A ROCK ABOUT 4" FELL FROM TOP OF CHUTE, HIT EE ON TOP OF HEAD. NO HARD HAT. HAD WELDING MASK ON.

EMPLOYEE WAS WLAKING BY PLANT WHILE SOMEONE WAS GRINDING METAL AND HE GOT SLIVER OF METAL IN LEFT EYE.

ROCK FELL FROM OUTSIDE OF CHUTE AT #1 SCREEN DISCHARGE. HIT RIGHT HAND.

WHILE USING A HAND HELD 6" PORTABLE ELECTRIC GRINDER WHEEL, HIT A ROUGH SPOT & JUMPED BACKWARD INTO RIGHT LEG BELOW KNEE.

EE WALKED INTO ANGLE IRON PROTRUDING FROM BED OF TRUCK.

EE WAS DOING GENERAL CLEAN UP AT QUARRY. HE STARTED GOING DOWN A SLIGHT HILL. MACHINE PICKED UP SPEED. EE PANICKED INSTEAD OF PUTTING ON THE BRAKES. HE WENT UP A DIRT PILE, AND THE MACHINE ROL LED OVER ONTO RIGHT SIDE.

EMPLOYEE WAS TRYING TO DISLODGE A ROCK IN CRUSHER. USING THE HYDRAULIC MECHANICAL DEVISE. A SMALL CHIP OF ROCK BROKE OFF & LODGED IN HIS RIGHT EYE.

CUTTING STEEL W/ OXY/ ACLY TORCH WHEN PART OF CURF BLEW BEHIND SAFETY GLASSES.