Buscar en el registro

EE STATED THAT A BAG SHE FILLED FELL TO THE BELT AND SHOT CEMENT OUT THE OPENING STRIKING HER IN THE EYE.

EE WAS CLEANING IN THE M6 HOPPER WITH A SUCTION HOSE AND FINE DUST FELL ON HIM AND GOT IN HIS EYES.

EE WAS USING A HAND HELP 7" GRINDER TO GRIND THE BUCKET ARM PIN ON A 966 END LOADER WHEN THE GRINDER CAUGHT AND KICKED BACK CAUSING 2 CUTS ON HIS LEFT WRIST. HE RECEIVED SUTURES TO CLOSE THE W OUND, BL, DID NOT MISS WORK OR HAD TO RESTRICTEDDUTY.

EE STATED; HE WAS RUNNING WATER LINE UNDER 3800 BELT AND AT END OF SHIFT HIS ELBOW STARTED HURTING.

GRINDING SURFACES FOR WELDING. FRAGMENTS GOT INTO EYES DESPITE WEARING PROPER SAFETY EQUIP.

WHILE MOVING PALLETS WITH PALLET JACK EMPLOYEE WAS PINNED BETWEEN SUPPORT PILLAR AND LOAD OF PALLETS. EMPLOYEE RETURNED TO DOCTOR ON 10-5-01 SORE CHEST AND WAS PUT ON RESTRICTIONS (WORKED REGU LAR JOB UNTIL 10-5-01).

MINER WAS CUTTING METAL WHEN IT SHIFTED. MINER CUT THROUGH GLOVE AND CUT HAND BETWEEN THUMB AND INDEX FINGER.

EE WAS CLEANING UP SPILL ALONG CK-6610 BELT AND HOSE BECAME PLUGGED. WHEN BLOCKAGE WAS REMOVED ARM WAS DRAWN INTO HOSE UP TO ELBOW.

EE WAS WORKING ON WELDER AND CAUGHT TIPS OF LAST 2 FINGERS ON RIGHT HAND IN FAN BLADE CUTTING ONE AND FRACTURING OTHER.

EMPLOYEE WAS WORKING ON A DUST SCREW CONVEYOR. WHILE ATTACHING A CHAIN HOOK ON A STEEL BEAM OVERHEAD, THE WEIGHTED ARM OF AN OVERHEAD DOUBLE-DUMP VALVE ACTUATED & CAUGHT HIS WORK JACKET, PULL ING HIS ARM INTO A PINCH POINT BETWEEN THE VALVE'S WEIGHTED SHAFT & THE ADJACENT STEEL CHANNEL FRAMEWORK. HE WAS RETRACTING HIS ARM FROM SETTLING THE CHAIN HOOK WHEN THE VALVE ACTIVATED.

TWO EE WERE TRYING TO OPEN THE HAMMER MILL DOOR BY REMOVING THE NUTS ONT HE BOLTS. THE WRENCH SLIPPED AND JUMPED BACK TWOARD THE EE, STRIKING HIM ON THE FACE.

EMPLOYEE WAS GRINDING WHEN HE FELT A PIECE OF DEBRIS ENTER HIS RIGHT EYE. HE FLUSHED THE EYE AND THOUGHT HE HAD GOTTEN FOREIGN MATERIAL REMOVED. EMPLOYEE WAS COMFORTABLE THROUGH THE NIGHT.HOWE VER, THE FOLLOWING MORNING HE FELT AS IF HE HAD A FOREIGN OBJECT IN HIS RIGHT EYE (SUPERIOR MEDIAL ASPECT) AND SOMETIMES THIS MOVES TO THE UPPER PART OF HIS EYE (UPPER LATERAL ASPECT). DIAGNO

EE WAS BOLTING IRON WITH ANOTHER. THE LOAD SHIFTED, CAUSING THE BEAM TO FALL AND SMASHED THE EMPLOYEE'S HAND BETWEEN THE IRON.

WHILE TRYING TO UNPLUG A RAW MATERIAL FEED CHUTEUSING A JACKHAMMER THE JACKHAMMER SLIPPED OFF THE MATERIAL & ALLOW EE HAND TO BE CAUGHT BETW3EENMETAL OF THE CHUTE & THE TOOL. RESULTING IN SMAS HED FINGER & DR VISIT, PRESCRIPTIONS

THE EE WAS HELPING TO REMOVE LINER PLATES FROM #1 FINISH MILL. THE EE WAS HOLDING ONTO THE BIT OF THE RIVIT BUSTER TO HELP POSITION & HOLD IT AGAINST THE BOLT OF A LINER. WHEN THE BUSTER WAS A CTIVATED, THE BIT CAME OFF THE BOLT, PINCHING THE EE'S THUMB BETWEEN THE FACE OF THE MILL & THE BIT, WHICH CAUSED A LACERATION TO HIS RIGHT THUMB.

THE EMPLOYEE WAS USING A 4.5" GRINDER ON SET OF DOOR HINGES FOR #3 KILN PIER WHEN ANOTHER EMPLOYEE CAME BY AND SAID SOEMTHING TO HIM. WHEN EE TURNED TO SEE WHA THE OTHER EMPLOYEE WANTED, HE HIT HIS FINGER WITH THE ROTATING GRINDING WHEEL.

EE WAS POKING AND LANCING OUT THE KILN FEED CHUTE, WHICH WAS PLUGGED WITH HARD KILN FEED. THE END OF THE LANCE SLIPPED OF THE CHUNK OF KILN FEED HE WAS WORKING ON LUNGED FORWARD, PINCHING HIS FINGER BETWEEN THE LANCE AND THE CLEANOUT PORT.

THE EMPLOYEE WAS CHECKING THE SPRAYS ON THE SPRAY TOWER. ONE OF THE COUPLINGS CAME OFF SPRAY #19 HITTING THE EMPLOYEE IN THE NOSE AND RIGHT AREA, CAUSING A LACERATION ABOVE THE RIGHT EYE AND A BROKEN NOSE.

THE EMPLOYEE WAS MOVING A SHAFT WITH AN OVERHEAD HOIST. WHILE MOVING THE SHAFT WITH THE HOIST IT GOT AWAY FROM HIM CAUSING HIM TO TWIST HIS RIGHT KNEE.

1-B CYCLONE WAS PLUGGED TIPPING VALVES ON THE 6TH FLOOR WOULD NOT MOVE SO THE EMPLOYEE STARTED TO WORK ON THEM WITH AN AIR LANCE HE HAD OPENED A PORT HOLE AT THE VALVES WHEN HE STARTED TO POKE WITH THE AIR LANCE THE HOT VEED FLUSHED OUT OF THE PORT BURNING THE EMPLOYEE

EMPLOYEE WAS LANCING OUT A PLUGGED PIPE WHEN DUST SHOT BACK INTO HIS FACE THE DUST FILLED UP HIS SAFETY GLASSES & WENT INTO BOTH EYES

WHILE POSITIONING THE TRANSFORMER RECTIFIER SET WITH CRANE, IT SUDDENLY SHIFTED AND CAUGHT HIS FINGER BETWEEN THE SET AND THE ANGLE FRAMEWORK OF THE WEATHER SHED OF THE PRECIPITATOR.

MILL PLUGGED AND MILL FILLED UP WITH COAL. COAL IN MILL CAUGHT FIRE EMP ON PLATFORM INSPECTING COAL FEED CHUTE AREA WHEN COAL BACKFIRED AND COAL EXPLODED.

MILL SYSTEM PLUGGED MILL FRILLED UP WITH COAL. COAL IN THE MILL CAUGHT FIRE EMP ON PLATFORM LADER INSPECTING COAL MILL CHUTE WHEN CAOL EXPLODED.

USING SM GRINDER TO SMOOTH OFF METAL WAS IN VERY CONFINED AREA OF COOLER. GRINDIGN HE FELT SOMETHING IN R. EYE.

EMPL RUNNING WORM IN PACKHOUSE.IT CLAM BAKED AND EMPL WAS COVERED WITH HOT CEMENT DUST.