Buscar en el registro

Employee was adjusting the kick plate on a bagging station when they placed left hand between the raised kick plate and the support structure underneath. They then cycled the machine by depressing the pneumatic control button causing the kick plate to lower pinching the left thumb between the plate and cross structure causing a laceration just below the thumbnail.

Employee was mixing mortar when whipper drill bit broke throwing him off balance into a nearby vertical I beam. When he collided with the I beam his middle finger got pinched between the handle of the whipper drill and the corner of the beam causing the injury.

The employee was removing angle iron framing and wood from a MCC building. The employee used methods of drilling and cutting during the task, and all work was above the employee's head. The employee was wearing a pair of safety glasses at the time of the incident. A piece of debris flew in-between the employee's safety glasses and forehead and lodged in his (R) eye.

Employee was at home when he felt something in his right eye, employee had been using a hand held grinder earlier that day at work and thinks a small piece of metal shaving got into his right eye at that time but did not notice until after he got home from work.

EE was removing an air exhaust muffler from a compressed air dryer system.After releasing the residual air from the air tank and line the EE unscrewed the valve not realizing there was still some stored pressure inside the line which blew small desiccant beads out striking the back of both hands and the back of both legs.

EE was lifting a machine part using a mobile crane.EE placed left hand on the cable of crane to move the part away from I-beam,the glove he was wearing got caught in head pulley, pinching his finger between the pulley and the cable, causing a laceration and a break at the end joint of his pinky finger on the left hand.

Miner states that he was placing a guard over the drive belt that had fallen off. His glove came in contact with the belt and the pulley, pulling his thumb into the belt.

Running an auger drill

Employee was cleaning under east clam shell with bobcat removing material when clam shell opened releasing material. Material went inside his boot causing burns on both feet.

THE EE WAS USING A PNEUMATIC JACKHAMMER TO BREAK UP PRODUCT STRUCK IN A HOPPER. THE EE HAD POOR BODY POSITION WHILE PERFORMING THE TASK RESULTING IN STRAIN TO THE LOWER BACK MUSCLES. THE EE CO MPLETED HIS SHIFT & RETURNED TO WORK THE FOLLOW-ING DAY & COMPLAINED OF PAIN. HE WAS AT THIS TIME TAKEN TO THE CO. DR. WHO PLACED HIM ON LIGHT DUTY.

EMPLOYEE WAS ATTEMPTING TO CATCH A BAG THAT FELL OFF THE BAGGING SPOUT WHEN HIS HAND HIT THE SPOUT CAUSING A LACERATION ON THE RIGHT INDEX FINGER. EMPLOYEE RECEIVED 5 STITCHES.

EE WAS HEATING THE OUTSIDE OF A BALL MILL WITH A TORCH. THIS WAS TO LOOSEN THE GLUE ON THE INSIDE SO THE BRICK LINER COULD BE REMOVED. AT 3 A.M.THE NEXT MORNING, EE WENT TO THE MEDICAL CENTER COMPLAINING OF EYE PAIN. THE VAPORS FROM THE GLUE HAD AN ADVERSE AFFECT ON HIS EYES.

EE WAS REALIGNING BAGGED MATERIAL ON THE SOUTH PALLETIZER WHEN HE WALKED OVER THE SAFETY LINE, CROSSED AN ELECTRIC EYE WHICH ACTIVATED THE RAKE ARM, WHICH PINNED HIM BETWEEN THE ARM AND ACROSS BAR. EE WAS BRUISED IN THE PELVIS AND LOWER BACK AREAS.

EE WAS CLEANING A DUST COLLECTION PIPE (BY HITTING PIPE WITH A HAMMER) WHEN FOR UNKNOWN REASONS THE EE REACHED INTO THE DOOR AND UP APPROX 8 INCHES WHERE HE CAUGHT HIS 3 FINGERS. (INDEX-ABOVE 1ST JOINT, MIDDLE-ABOVE 2ND JOINT, RING-ABOVE 1ST JOINT) EE DOES NOT REMEMBER MUCH OF THE EVENTS.

EE WAS BAGGING PRODUCT AT A BAGGING STATION WHILE PLACING AN EMTPY BAG OVER SPOUT, THE BAG SLIPPED CAUSING HIS HAND TO HIT THE END OF THE SPOUT.THIS RESULTED IN A LACERATION TO THE LEFT HAND INDEX FINGER WITH 17 STITCHES.

EMPLOYEE WAS REARRANGING BAGS ON A PALLETIZING MACHINE WITH OUT LOCKING OUT THE POWER SOURCE, THE MACHINED WAS ON AUTOMATIC MODE. THE EMPLOYEE ACCIDENTLY TRIPPED A SENSOR CAUSING THE MACHINE T O START. THE RACK ARM KNOCKED HIM OFF OF HIS FEET AND PINNED HIM IN A POSITION WHICH CAUSED HIS KNEE TO FLEX FAR BACKWARDS RESULTING IN A TORN CARTILAGE.

EE WAS USING IMPACT WITH UNIVERSAL JOINT OVER HIS HEAD. IMPACT SLIPPED OFF NUT AND ROTATING UNIVERSAL STRUCK EE ON RIGHT SIDE OF HEAD, CUTTING HIM AND REQUIRING STITCHES.

EE WAS THREADING PLASTIC THROUGH A STRETCH WRAPPING MACHINE AND HIS HAND WAS CAUGHT BETWEEN 2 ROLLERS RESULTING IN 5 STITCHES TO HIS RIGHT MIDDLE FINGER.'

EE WAS REMOVING BOLTS AND NUTS ON TY ROCKET WITH AN IMPACT WRENCH , WHEN A NUT GOT HUNG IN THE SOCKET. EE STUCK HIS FINGER IN THE NUT TO PULL IT OUT OF THE SOCKET AND HIT THE SWITCH ON THE IMP ACT WRENCH, RUNNING THE NUT ON HIS FINGER.

GLOVE CAUGHT ON AUGER WHILE TURNING.

EE WAS JACKHAMMERING SLAG BUILDUP IN #3 KILN WHEN A PIECE OF SLAG FROM OVERHEAD FELL AND STRUCK THE EE ON THE BACK.

EMPLOYEE WAS OPERATING A BOBCAT TO PUSH A PILE OF HOT DROP OUT MATERIAL (DUST) WHEN THE MATERIAL SPLASHED BACK INTO THE BOBCAT. EMPLOYEE RECEIVED 2ND DEGREE BURNS TO HIS HANDS AND LEGS (BELOW THE KNEE).

WHILE GRINDING ANGLE IRON [WEARING SAFETY GLASSES & FACE SHIELD] EMPLOYEE FELT SOMETHING HIS CHEEK & THEN A SLIGHT STING IN EYE [RIGHT EYE]. EYE WS LOOKED AT NOTHING WAS FOUND & EMPLOYEE SAID IT WAS JUST IRRITATED. EARLY AM 1/12/95 [APPROX 7:150 EMPLOYEE FELT SHARP PAIN IN EYE & EYE STARTED HURTING.

EE WAS REPALCING A SECTION OF AIR DUCT WHERE THE OLD DAMPERS HAD BEEN TAKEN OUT OF THE KILN EXHAUST SYTEM. HE HAD PERFORMED THE FOLLOWING JOBS CUTTING GRINDING WELDING TO COMPLETE THE WORK. EE WORE THE PROPER PPE FOR EACH JOB.

EE WAS WELDING AND CUTTING ON HUMMER AND GOT TRASH IN HIS EYE.

EE WAS GOING TO USE AN IMPACT WRENCH AND WHEN HE TURNED IT ON MATERIAL FLEW OUT INTO HIS LEFT EYE.

EE WAS WORKING IN KILN, USING AN AIR HAMMER TEARING OUT SLAG WHICH HAD BUILT UP IN KILN FIRING ZONE. HE GOT SOME TRASH IN HIS EYE AND HIS EYE WAS SCRATCHED. SAFETY GLASSES WERE WORN AT THE TIM E.

EE WAS REPLACING LINERS IN JAW CRUSHER. EMPLOYEE WAS OPERATING PETTIBONE LIFTING LINERS & PLACING THEM IN CRUSHER. EE SIGNALED FOR LINER TO BE LOWERED & HAD HIS FOOT IN CRUSHER. LINER WAS L OWERED INTO POSIITION AND PINCHED HIS FOOT.

EMPLOYEE WAS PRIMING A DIESEL PUMP-ONE FOOT WAS ON PUMP FRAME AND HE WAS PULLING AND PUSHING PRIMER HANDLE-HANDLE BROKE AND EMPLOYEE FELL BACKWARDS AND DOWN A 4'BANK.

EE DURING DAY OF 2-7-93 WAS WELDING HOLDING MATERIAL TO BE TACK WELDED ON IN AREA OF OTHER WELDING EE REPORTED INJURY AM 2-8-93.

EMPLOYEE REMOVED LID OF AN AUGER. AUGER 9' FROM FLOOR. TURNED AUGER ON TO CHECK FOR PROBLEM. W ALKED UNDER AUGER TO CLIMB UP TO INSPECT. LID VIBRATED OFF AND STRUCK SHOULDER. CUT AND BRUISE D SHOULDER.

BUILDING AND INSTALLING WORK PLATFORMS IN THE DISCHARGE AREA OF THE KILN AND COOLER.FINES GOT INTO EYE AND WERE WASHED OUT.

EE WAS TO BLOW OFF FILTERS USING COMPRESSED AIR, HE KINDED THE END OF THE HOSE WHICH HE HELD IN HIS HAND AND THEN TURNED THE COMPRESSED AIR VALVE ON SUPPLYING AIR TO THE HOSE. THE END OF THE H OSE SLIPPED OUT OF HIS HAND KNOCKING OFF HIS SAFETY GLASSES AND STRIKING HIS LEFT EYE.

WATER LINE (METAL PIPE) WAS BEING TAKEN OUT OF SERVICE. EE WAS REMOVING PIPE BY USING A CUTTING TORCH. EE PUSHED ON THE PIPE WITH ONE HAND WHILE HE HELD THE TORCH WITH THE OTHER HAND. HE GOT T HE TORCH TO CLOSE TO HIS LEG AND GOT BURNED.

2 MEN WORKING AND WELDING IN AIR DUCT-GLARE FROM WELDING BURNED BOTH EYES-EMPLOYEE USED WELDING HOOD WHEN WELDING-WHEN HE WAS NOT WELDING HE HAD TINTED SAFETY GLASSES ON AND KEPT HIS EYES SHUT .

HE TO BLOW TRASH OUT OF KILN WITH AIR HOSE. WEARING SAFETY GLASSES WITH SIDE SHIELDS. AIR HOSE CAME APART WHERE HOSES WERE COUPLED. AIR HOSE WHIPPED AROUND BLOWING TRASH INTO HIS EYE.

I.NAME WAS WORKING IN THE SHOP GRINDING (USING A SMALL HAND HELD GRINDER). HE WAS WEARING EYE PROTECTION, GLASSES, AND FACE SHIELD. OTHERS WORKING IN SAME GENERAL AREA, A SMALL AMOUNT OF GRIND ING BEING DONE BY OTHERS AT DIFFERENT TIMES. I.NAME GOT SOMETHING IN HIS RIGHT EYE.

EE WORKED IN SEVERAL LOCATIONS DOES NOT KNOW WHEN HE BURNT HIS EYES AND SCRATCHED THEN .

WHILE DRILLING FLAT BAR IN PRESS- BIT HUNG AND BROKE FREE END LOOSE FROM CLAMP WHICH HIT SUBJECT ON BACKSIDE OF RIGHT HAND.

REPAIRING FEED CHUTE #2 KILN(EYES BURNT).

BLOWING BAGGER OUT WITH PRESSURE HOSE HIT IN EYE WITH END OF RUBBER HOSE EMPL BLOWING THE I C BAGGER HOPPER OUT THE EMPL HOLDING AIR HOSE AND IT SLIPPED OUT OF THE BAGGER CHAMBER AND OUT OF HI S HAND HOSE FLOPPING AROUND AND STRUCK HIM IN THE R EYE

WELDING SLAG SPOTTED BURNS ON BOTHE HANDS BURNS WERE STATED AS NOT A PROBLEM BY EMPLOYEE EMPLOYEE WENT TO DR 8 DAYS LATER SPOTS SHOWED SIGNS OF INFECTION