Buscar en el registro

Employee was changing worn bits on a cultivator at a reclamation mine project using an air impact wrench to loosen restraining nut. He supported himself with left hand holding on to back part of bit, the flat head bolt had a barb on it, and it spun around causing a small circular cut in palm of hand.

EMPLOYEE WAS TIGHTENING A DRILL BIT ON DRILL PROD. THE CHUCK KEY SLIPPED CAUSING EMPLOYEE TO HIT KNUCKLE TO HIT THE DRILL BIT AND CUTTING THE KNUCKLE.

EE WAS STARTING UP APLLETIZER, LEANED IN TO STRAIGHTEN OUT A PIECE OF MEADBAORD, GLOVE GOT CAUGHT BY THE OUTFEED ROLLERS AND PULLED HIS LEFT HAND BETWEEN A MOVING ROLLER AND AN IDLE ROLLER CUT TING THE PALM OF HIS HAND.

EMPLOYEE WAS HARDFACE ON A PIPE FITTING, A PIECE OF SLAG METAL FELL ONTO HIS FOREARM BURNING A SMALL SPOT. HE DID NOT ADMINISTER FIRST AID INITALLY AND AS RESULT THE AREA BECAME INFECTED. HE DID NOT REPORT THIS INCIDENT TO MANGEMENT UNTIL 9-10-96 IN THE MID MORNING.

EE WAS SITTING AT OPERATOR'S SEAT WHEN SWIVEL SEAT POST MOUNT BROKE & SHATTERED. THIS CAUSED WHOLE SEAT ASSEMBLY & EE TO FALL BACKWARDS ON TO EXPANDED METAL FLOOR. BRUISED RIGHT HIP & LACERATE D RIGHT ELBOW. LACERATION REQUIRED 5 STAPLE.

WAS ON TOP OF SLICER HOLDING TEFTLON PIECE DOWN FOR ANOTHER PERSON TO DIRLL HOLE THROUGH FROM UNDERNEITH...PERSON DRILLED IN WRONG AREA OF TEFLON & DRILL BITE WENT INTO HAND.

EMPLOYEE USING EXTENSION LADDER IN CUTTING OUT 4" PIPE. WHEN PIPE FELL, IT WAS STILL ATTACHED TO A FLEX-HOSE AND IT SWING BACK, KNOCKING LADDER OUT FROM UNDER EMPLOYEE. EMPLOYEE FELL 8-10 FEET LANDING ON HIS HANDS, SIDE, AND HEAD. FALL RESULTED IN FRACTURES OF BOTH WRISTS AND LACERATION ABOVE RIGHT EYE.

EMPLOYEE WAS CUTTING WITH OXY/ACE TORCH. TORCH POPPED AND A PIECE OF HOT SLAG OR METAL WENT INTO HIS LEFT EAR.

EMPLOYEE WAS ATTEMPTING TO CLEAN OUT MILL FEEDER WITH A CROWBAR (WHILE THE FEEDER WAS STILL IN OPERATION) AND THE CROWBAR GOT CAUGHT IN THE FEEDER AND MASHED HIS RIGHT THUMB.

3 MILLWRIGHTS REMOVING OLD DUCT WORK.WAITING FOR OTHERS TO COMPLETE THEIR WORK,HE RELEASED MOUNTING CLAMPS.VIBRATING CAUSED DUCT TO TWIST AND FELL.I.NAME TRIED TO CATCH FALLING DUCT AND LACERA TED LEFT THUMB ON EDGE OF DUCT.

WELDER ON LADDER WELDING 1/4"X1"X4' STRIP TO PIPE.DROPPED METAL STRIP HITTING I.NAME ON RIGHT KNEE.I.NAME HOLDING LADDER FOR WELDER.SENT TO DR FOR EXAM GIVEN RX FOR PAINKILLER.

CUTTING 2X4 WITH 7 INCH PORTABLE SAW. AS HE PUSHED SAW INTO WOOD THE 2X4 SLIPPED. EE REACHED TO HOLD 2X4 AND PUT HIS LEFT INDEX FINGER INTO SAW BLADE.

USING CUTTING TORCH TO ENLARGE OPENING ON PULLEY GUARD. IN PASSING TORCH FROM ONE HAND TO THE OTHER HE PASSED FLAME ACROSS HAND. AFTER FEELING BURN, HE RAISED GOGGLES AND SAW BURN. HE WAS NOT WEARING PROTECTIVE GLOVES WHICH ARE FURNISHED BY COMPANY. SNET TO DOCTOR AND HE WAS GIVEN AN INJECTION FOR PAIN (DEMEROL).

I.NAME WORKING WITH ANOTHER EMPL WHO WAS WELDING PIPE.THAT NIGHT WENT TO EMERG RM FOR MEDICATION FOR EYES. NEXT DAY REPORTED TO COMPANY DR WHO GAVE HIM RX FOR EYE DROPS.

EMPLOYEE AND OTHER PERSON WERE RIGGING MOTOR WITH CHAINS. THERE WAS A MISUNDERSTANDING BETWEEN OTHER AND THE CRANE OPERATOR. THE MOTOR WAS LIFTED AND INJURED WAS NOT IN THE CLEAR.

EMPLOYEE WAS HOLDING STEAM CLEANER WAND PREPARING TO WASH BACK OF A PICKUP BED THERE WAS A RESTRICTION IN THE HOSE WHICH BLEW LOOSE SUDDENLY CAUSING THE HOSE TO WHIP & HIT THE EMPLOYEES ARM H AND & NECK

EMPLOYEE WAS IN THE PROCESS OF ROTATING GEAR AND CAUGHT HIS THUMB IN THE GEAR THEETH. HE RUSHED INTO THE JOB AND WAS NOT SLOW AND DELIBERATE ABOUT HIS ACTIONS OR RUNNING THE BLOWER THROUGH IT S MOTIONS.

EMPLOYEE WA BURNING RUSTED METAL OFF TOP OF PUMP HOUSE. SOME HOT SLAG GOT INTO HIS LEFT EAR.

EMPL WAS GRINDING IN BUCKET METAL HIT SIDE OF BUCKET & CAME BACK INTO WELDING HOOD.

EMPL WAS GRINDING DOWN INSIDE 24" PIPE, FOREIGHN BODY ENTERED LEFT EYE UNDER SAFETY GLASSES.

WHILE GRINDING 2N A TRAILER, A FOREIGN PARTICLE GOT IN EYE. HE WAS NOT AWARE OF IT AT THE TIME. HE WAS WEARING SAFETY GLASSES AND A FULL FACE SHIELD. LATER HE THOUGHT HE HAD A FLASH BURN FROM WELDING. ON 1-29 HE WENT TO DOCTOR WHO REMOVED THE PARTICLE. SURGICALLY REMOVED.

EMPLOYEE WAS GRINDING ON WORK BENCH WHEN FOREIGN BODY GLANCED OFF TOOL ROOM STRIKING EMPLOYEE IN RIGHT EYE.

EMPLOYEE WAS GR3NDING A FLAT PIECE OF STEEL ON GRINDING WHEEL, STEEL SLIPPED OFF WHEEL AND HIS LEFT INDEX FINGER HIT CORNER OF GRINDING WHEEL, CUTTING SECFON KNUCKLE TO BONE.

DRAGLINE CABLE 6RAKE.

FABRICATING EQU3PMENT FOR MOUNTING OF CONTROLLER & OTHER PROCESS EQUIPMENT. DRILLING BOLT HOLES IN MOUNTING BRACKETS. INITIAL PILOT HOLE HAD BEEN DRILLED. WAS USING A 29/64" BIT TO ENLARGE TH E HOLE WORK CAU1HT ON BIT DRAWING WORK & FINGER UP THE BIT TOWARDS CHUCK.

EMPLOYEE CARRIE8 IN A PIECE OF 3/4"OF R APPROX. 19 1/2" IN DIAMETER AND PUT IT ON THE PANA GRAPHTORCH.WHILE CUTTING OUT A FLANGE FROM THIS PIECE THE EMPLOYEE BENT OVER TO SEE HOW THE SLAG WAS WAS BLOWING AWA2 FROM THE CERF.THUS PUTTING OUT HIS BACK,.

TWISTED AROUND IN TRACTOR OPERATOR SEAT TO OBSERVE SIGNALS FOR OPERATING WENCH

INJURED AND ANOTHER EMPLOYEE WERE ATTEMPTING TO ALINE THE TRAILER MOUNTED DRILL OVER A STRING OF DRILL RODS WHICH WERE STUCK IN THE GROUND. THEY HAD BEEN DRILLING WHEN THE DRILL STRING STRUCK A ROCK AND CAUSED THE DRILL TO JUMP OUT OF PLACE. INDEX AND MIDDLE FINGERS BECAME PINCHED BETWEEN THE DRILL STEEL AND THE DRILL COLLAR.

USING HEAVY EQUIPMENT TO PUSH THE SERVICE TRUCK. THE BLADE ON THE EQUIPMENT SLIPPED CAUSING THE TRUCK TO JERK AND JERK THE EMPLOYEE\S NECK.

LOWERING METAL WITH HOIST HAND CAUGHT BETWEEN METAL AND HANDRAIL

CABLE ON CRANE CAME LOOSE CAUSING MOTOR TO PINCH HAND.

WHILE LOADING SEVERAL PIECES OF EXPANDED METAL FOR TRANSPORT TO ANOTHER JOB SITE ONE OF THE PIECES OF METAL CAME OUT OF THE HOIST BEING USED TO MANIPULATE THE MATERIAL. THE METAL FELL ON THE E MPLOYEES FOOT ON EDGE, BREAKING HIS FIRST THREE TOES. RIGHT FOOT

USING AIR GRINDER ON PIPE FITTINGS,LAID GRINDER DOWN BEFORE WHEEL STOPPED TURNING.