Buscar en el registro

ALLEGEDLY DROVE TRACTOR ACROSS UNEVEN GROUND CAUSING PAIN TO TAILBONE. TWO DAYS LATER HE ALLEGEDLY WENT TO DR AND RECEIVED PRESCRIPTION MEDICINE. ON 8-30 WE WERE MAD AWARE ABOUT EE RECEIVING P RESCRIPTION MEDICATION ON 2-23. ALLEGEDLY ON 5-30 EE RECEIVED MEDICAL TREATMENT.

EMPLOYEE WAS WORKING ON A VALVE THAT WAS STOPPEDUP WITH MUD. HE WAS PULLING ON A PIECE OF PVC PIPE WHEN HIS HAND SLIPPED AND CAUSED HIS FINGERS TO BE CAUGHT IN AN AUGER THAT WAS NOT PROPERLY LOCKED OUT. THE TIPS OF THE MIDDLE FINGER AND RING FINGER WERE SEVERED. FINGERS HAD TO BE OPERATED ON TO REPAIR DAMAGE.

DRILLING HOLES WHEN SOME MATERIAL ENTERED LEFT EYE.

EE PLACED THE WEAR PLATE FROM THE 63 MILL OUT OFTHE WAY WHEN EE TURNED BACK AROUND THE PLATE HADSHIFTED & WAS COMING TOWARD HIM AS EE WAS MOVINGTOWARDS IT. THE PLATE HIT HIM IN THE ARM & CUT HIS LEFT FOREARM. THE PLATE HAD A SHARP EDGE ON IT

EE WAS CUTTING A PIECE OF METAL DOWN FROM THE CAR LOADING AREA. ANOTHER EE WAS HOLDING THE PIECE OF METAL FOR HIM. THE PIECE OF METAL FELL ANDCUT EE ON THE FINGER WHEN HE CUT IT LOOSE.

EE FORGOT TO REMOVE THE CHUCK FROM THE DRILL. THE CORD GOT TANGLED AROUND THE BIT. THE CORD CAUGHT HIS LEFT HAND AND PULLED IT INTO THE BIT.

EE WAS WASHING OUT A RR TANK CAR WHEN HE SLIPPED & FELL BACKWARDS. AT THE TIME HE WS USING A PRESSURE WASHER. AS HE FELL, THE WATER STREAM CAME ACROSS HIS RIGHT FOOT ABOVE THE STEEL TOE OF HIS BOOT CAUSING AN ABRASION.

HE WAS GRINDING SHREDDER TEETH WITH A PORTABLE HADN HELD GRINDER. PIECES OF METAL GOT INTO HIS RIGHT EYE. HE DIDN'T KNOW WHAT TIME IT GOT IN THERE. HE WAS UNAWARE OF IT UNTIL HIS EYE STARTED HURTING THE NEXT DAY. THEY QUIT GRINDING AT 1PM.

EMPLOYEE WAS WASHING OUT A TANK CAR WITH A HIGH PRESSURE WASHER, WHEN HE PASSED THE SPRAY STREAM OVER HIS FOOT WHICH CUT THROUGH HIS SHOE AND PUNTURED HIS FOOT.

85061S USING A WINCH TO LIFT A DRILL AUGER IN THE AIR TO GOOVER ANOTHER AUGER.THE CABLE FLEXED CAUSING THE HOOK TO COME UNHOOKED AND THE AUGER HIT HIM IN THE BACK OF THE HEAD AND THE LEFT SHOU 3459?LACERATION TO HEAD REQUIRING SUTURES AND SKIN ABRASION AND CONTUSIONS TO LEFT SHOULDER.

EE WAS TRYING TO EXTRUDE ICE FROM A WATER HOSE WITH PRESSURE FROM THE MUD PUMP. SOME ICE COME OUT, BUT NOT ALL. THE METAL END OF THE HOSE WAS PLACED IN A FIRE TO MELT THE ICE. WHEN THE ICE MEL TED, THE SMALL AMOUNT OF WATER IN THE HOSE WAS RELEASED UNDER PRESSURE AND THE HOSE FLEW BACK AND HIT HIS RIGHT WRIST, BREAKING THE SKIN AND BRUISING HIS ARM.

WORKING ON BAGGER.

ALLEGED BACK INJURY.

HE WAS BAGGING 50 LBS. OF CLAY. HIS LEFT WRIST STARTED HURTING AND GETTING SORE. HE COMPLETED HIS 8 HR SHIFT ON 3/28/90. HE APPLIEDA WRIST BRACE AND CAME INTO WORK ON 3/29/90. HE WAS UNABLE TO COMPLETE HIS SHIFT ON 3/29/90 (ONLY WORKED 2 HRS ON 3/29/90). I.NAME HAD THIS SAME KIND OF INJURY ON 10/18/89.

HIGH PRESSURE MUD HOSE WHICH CONNECTS TO THE DRILL CORE BARREL TO BLOW OUT CORE HAD QUICK RELEASE FITTING TO DEFORM AND RELEASE UNDER PRESSURE. EE WAS HOLDING HOSE FITTING TO PREVENT THE HOSE FROM FLYING WILDLY ABOUT IF SUCH AN ACCIDENT SHOULD OCCUR. THE FITTING STRUCK HIM ACROSS THE HAND AND KNEE. CAUSING BRUISED HAND AND KNEE, AND CHEST.

BAG BURSTED CLAY IN HIS EYE WHILE HE WAS STANDING BETWEEN SPOUTS 2 & 3. HE WAS WEARING SAFETY GLASSES AT THAT TIME. BECAUSE HIS RIGHT EYE DID NOT SEEM IRRITATED HE DID NOT MENTION THE INCIDENT TO HIS SUPERVISOR. FIRST SEEN BY DOCTOR ON 2-23-90. HE ALSO WENT ON 2-26-90 & 3-5-90. WHEN HE WENT BACK ON 3-7-90 & 3-12-90 HE WAS DIAGNOSED AS HAVING BLEPHARITIS & CONJUNCTIVITIS IN RIGHT EY

EMPLOYEE WAS WITH TWO OTHER EMPLOYEES INSIDE OF MILL HOUSING WELDING & APPARENTLY THE FLASHES FROM THE WELDING ARC FROM BEHIND HIM WAS REFLECTED OFF HIS WELDING HELMET LENS & BRIGHT ENOUGH TO BURN HIS EYES

EMPL WAS GRINDING EDGE OFF PUNCH IT SLIPPED & LACERATED FINGER.

NEW BAGGING EQUIMPENT HAD BEE INSTALLED AND WAS BEING STARTED UP. APINCH POINT WAS OBSERVED, SO EQUIMPENT WAS STOPPED, BU TWA NOT LOCKED OUT. EMPLOYEES ATTENTION WAS MEMENTARILY DISTRACTED T O A MINOR ADJUSTMENT OF CONVEYOR SLIDE PLATES. DURING THIS ADJUSTMENTS, EMPLOYEE PLACED FOOT IN PINCH-POINT THEN HEMOVED WOOD PALLET IN ORDER TO MAKE ADJUSTMENT. THIS PLACED PALLET IN PATH O

HE WAS DRILLING3FOR CLAY USING DRILL AUGERS. THE AUGER WAS OUT OF THE GROUND AND HE WAS PREPARING TO TAKE THE AUGER AROUND TO THE SIDE OF THE DRILL TRUCK. THE CABLE CAUGHT ON PLATE CAUSING THE AUGER TO KICK 6ACK, HITTING HIM IN THE LEFT SIDE OF HIS MOUTH, CUTTING HIS FACE AND KNOCKING HIM TO THE GROUND. HE RECEIVED A KNOT ON HIS RIGHT SHOULDER BLADE AND SCRATCHES ON HIS BACK ALSO B