Buscar en el registro

Welding on jaw of crusher, after shift realized scratching in eye from foreign object due to welding.

Operator set down a grinder while cutting disk was still spinning, disk contacted the conveyor belt and jumped to the side. The spinning disk contacted the back of the operators hand and caused a laceration to the hand. Laceration required stiches to close.

Flash burn to eyes while doing maintenance.

Using a grinder to remove a bracket and at some point got a piece of steel in their eye.

Using air nozzle to blow away debris, small piece got into left eye.

Holding cutting edge bolt in place, impact wrench caused bolt to spin and cut index finger on employee.

Employee was loosening a bolt with impact wrench. Employee tried to hold bolt in place with hand, when bolt head spun and cut hand.

Operator was using a cut-off wheel and disk came apart. Small section struck operator in the stomach, requiring 4 stitches to close the laceration.

Operator was removing cutting edge from loader, holding bolt in place with left hand, bolt spun while using impact wrench, cutting operators left thumb.

Jarring motion of digging hard rock over the course of the day caused lower back pain.

EE alleges that while operating a backhoe scaling quarry highwall, his lower back began to hurt after being jarred when a large rock hit the bucket.

While replacing bracket using the air gun to spin off the bolts on top. Right was on the bottom holding the bolt up when the air gun jammed on, causing the bolt to spin resulting in a laceration on his finger.

While tightenting the blow bars on the impactor, the mall missed the shoe and struck the blow bar. A chip from the blow bar struck employee on the forearm.

Employee was directing other employee who was operating hammer to break rock in the jaw when the hammer slipped off the rock and lunged over crushing EE's hand.

As employee was grinding an air arced area a piece of debris went under his safety glasses and into his eye.

While attempting to fasten seeder to the three point hitch of the tractor the seeder dropped and wedged victims hand against the tractor arm. The incident at first blush was determined not to be reportable and then reconsidered.

EE WAS USING AN AIR HAMMER TO REMOVE MUD & CLAY OUT OF ROTO-LIFT ON THE ROLL PLANT WHEN HIS SHOULDER BECAME SORE-PAIN INCREASED OVERTIME, SO HE IS SEEKING TREATMENT. SOUGHT MEDICAL TREATMENT IN MAY.

THE WELDER PLACED THE HAND GRINDER THAT HE HAD BEEN USING ON THE FENDER OF THE TRAILER THAT HE WAS WORKING ON. APPARENTLY SOMETHING CAME OFF THE GRINDING WHEEL AND STRUCK HIS EYE FROM BEHIND T HE GLASSES.

EE WAS LOOKING DOWN IN BREAKER WHEN A ROCK FLEW OUT AND STRUCK HIS WRIST.

EMPLOYEE WAS SLOWLY MOVING DRILL INTO POSITION WHEN EITHER THE TRACK SLIPPED OFF ROCK OR TEETERED OFF ROCK. THE DRILL OVERTURNED AS A RESULT.

WHILE TORCHING HIS HAND CROSSED THE FLAME OF THE TORCH CAUSING BURN.

EE GOT DUST IN HIS EYES WHILE AIR ARCING.

WHILE CUTTING A PIECE OF METAL PLATE, A METAL PARTICLE GOT UNDER GLASSES AND INTO HIS RT EYE.

EE WAS GRINDING ON A WELD WHEN A SMALL PIECE OF METAL GOT UNDER HIS SAFETY GLASSES ANBD INTO HIS EYE. THE METAL WAS REMOVED BY A PHYSICIAN.

WHILE DRILLLING A HOLE IN A PIECE OF SHEET METALTHE BIT GOT CAUGHT & THE PIECE METAL SPUN AROUNDON THE BIT. THE SPINNING METAL STRUCK HIS FINGERRESULTING IN A LACERATION ON HIS THUMB

EMPLOYEE WAS GRINDING A PIECE OF METAL FOR THE DOZER WHEN A FUGITIVE PARTICLE GOT IN HIS RT EYE.THAT NIGHT IT WAS GETTING WORSE AND EMPLOYEE HAD TO SEE A PHYSICIAN.

EE WAS CUTTING SCREENS WITH TORCH WHEN HE ACCIDENTLY TOUCHED HIS FOREARM WITH THE TORCH.

EMPLOYEE WAS AIR ARCHING THE HEADS OF THE BOLTS OFF LINERS IN THE CRUSHER MACHINE. A HOT SPARK BLEW UP AND LANDED ON HIS LEFT EAR, RESULTING IN MINOR BURN.

WHILE PERFORMING MAINTENANCE ON A CRUSHING PLANT CONVEYOR, EE WAS CUTTING METAL [FOR WELDING] WITH A TORCH. A PIECE OF HOT SLAG FLEW BACK & HIT HIS EAR.

WHILE CHANGING A STEEL, EE WAS THROWN BACK [A CHAIN BROKE]. THE WEIGHT OF THE STEEL PUSHED HIM BACK & TWISTED & BENT HIS BACK TO THE RIGHT.

EE WAS TRAVELING AND WALKING ALONG SIDE THE AIR TRACK DRILL. HE SLIPPED AND FELL AND THE TRACK OF THE DRILL TRAVELED OVER HIS FOOT.

EE WAS HARD SURFACING MAMMER FOR HAMMERMILL AND APPARENTLY WORE THE WRONG SEEING GLASSES UNDER HIS WELDING HELMET RESULTING IN WELDING FLASH.

EMPLOYEE WAS WELDING ON THE GRATE OF THE PRIMARY CRUSHER WHEN SLAG FROM THE WELD LANDED ON HIS BOOT BURNED THROUGH HIS BOOT CAUSING INJURY TO HIS FOOT

EMPLOYEE WAS OPERATING DRILL WHEN PULLDOWN CHAIN SNAPPED AND WHIPLASHED KNOCKING OFF EMPLOYEE'S HARD HAT AND LACERATING TOP OF HEAD, REQUIRING STITCHES.

WITHOUT ACTUAL KNOWLEDGE OF WHEN THE METAL GOT INTO HIS EYE, INJURED ASSUMES IT HAPPENED WHILE CUTTING & CHIPPING METAL DURING PLANT REPAIR.

WHILE ASSISTING ANOTHER WELDER, HE APPARNTLY STOOD TO CLOSE TO WHERE THE WELDING WAS BEING PERFOMRED AND WAS EXPOSED TO THE FLASH.

PIECE OF STEEL IN EYE FROM GRINDING.

WHILE CLEARING ROCK MATERIAL AWAY FROM A LARGER ROCK. THAT WAS JAMMED IN THE JAW, ONE RCOK ROLLED DOWN STRIKING HIS HAND AND SMASHING HIS THUMB AGAINST ANOTHER ROCK.

EE INJURY OCCURRED WHILE WELDING ACROSS FROM ANOTHER WELDER.

WHILE OPERATING A CRANE WITH DROP BALL TRAVEL LEVER KICKED OUT AS EE WAS REACHING FOR IT CAUSING THE REPORTED INJURY

I.NAME CHIPPING SLAG FROM A PIECE OF IRON AND THE CHIPPING HAMMER DEFLECTED BACK AND STRUCK HIM IN THE MOUTH CHIPPING FRONT TOOTH.

EMPLOYEE WAS WELDING IN IMPACTOR AND WAS OVERCOME BY SMOKE.

I NAME REPORTS THAT HE CAUGHT & PINCHED HIS FINGER BETWEEN A BLOCK OF WOOD & THE FRAMEWORK OF A CRUSHER

EE WAS GRINDING ON METAL WHEN A PARTICLE BECAME LODGED IN HIS EYE EE REPORTS THAT HE WAS WEARING PROTECTIVE EYEWEAR AT THE TIME.

EE REPORTS THAT AS HE WAS DRILLING INTO A LARGE BOULDER A PIECE OF CLAY DISLODGED AND FELL ON HIM.

EE REPORTS THAT HE AND TWO OTHERS WERE WELDING ON A LOADER BUCKET. IN THE COURSE OF THIS JOB HE WAS EXPOSED TO OCCASIONAL WELDING FLASHES FROM THE OTHER WELDERS. LATER THAT EVENING HE SOUGHT M EDICAL ATTENTION AS A RESULT OF PAIN AND SWELLING IN HIS EYES.

I.NAME REPORTS THAT HE REMOVED A GUARD TO MAKE AN ADJUSTMENT TO THE ROTOVATOR WHEEL AND THAT WHILE MAKING THAT ADJUSTMENT HIS GLOVE BECAME ENTANGLED IN THE MACHINERY DRAWING HIS HAND INTO THE MACHINERY.

EMPLOYEE WAS FEEDING ROCK BREAKER. HE WAS HOOKING A CHAIN AROUND THE ROCK SO A LOADER COULD PULL THE ROCK OUT JAW OF BREAKER CAME BACK AROUND AND PINCHED EMPLOYEE'S RIGHT HAND BETWEEN THE JAW AND ROCK.

ROCK QUARRY CREW WAS LIFTING MESABI SCREEN TO ROCK CRUSHER WITH A CRANE WHEN SPRING TWISTED AND FLEW OUT CATCHING EE S LEFT FOREARM CUTTING SAME HE ALSO BRUISED HIS LEFT RIB CAGE AREA AS A RES ULT.

HE REPORTS HE WAS WELDING IN A CRAMPED AREA AND SUFFERED FLASHBURNS TO HIS EYES.