Buscar en el registro

Employee was repairing tube leaks on reheat header. we were using the pneumatic grinder to clean tubes and dirt blew in his left eye.

EE WAS PREPARING A BOILER TUBE TO REPAIR A CRACK IN THE TUBE. AIR FROM THE PNEUMATIC GRINDER BLEW DUST UP UNDER HIS WELDING HOOD.

EMPLOYEES WERE CUTTING AND WELDING PATCHES ON SEWAGE TREATMENT PLANT.

DRILLING HOLE AT AN ANGLE WHEN DRILL LOCKED UP AND CAUGHT EE'S HAND BETWEEN STEEL.

TAKING CENTER POST FROM D COAL MILL & CENTER POST FELL FROM MILL LANDING ON UPPER CHEST

EE WENT TO GET THE ATTENTION OF A CONTRACTOR. THE CONTRACTOR TURNED AROUND WHILE UNHOOKING A GAINT GUN AND EE WAS SPRAYED WITH PAINT.

EE WAS SUPERVISING WELDER ON AN OPERATION WHICH DID NOT HAVE THE APPROPRIATE ARAC SHIELD IN PLACE. DURING THE COURSE OF THE OPERATION EE RECEIVED MINOR WELDING BURNS TO THE EYES.

EMPLOYEE WAS GRINDING PIPE WHEN WHEEL CAUGHT THREDS & THREW HIS FINGER INTO GUARD.

ATTEMPTING TO REPAIR MACHINE HAND SLIPPED HIT FAN

RIGHT PINKIE FINGER WAS PINCHED BETWEEN SHEAVE AND CABLE GUIDE OF CRANE CABLE BLOCK.

WHILE INPECTING V BELTS HIS FINGERS BECAME PINCHED BETWEEN BELTS AND SHEAVE.

CHANGING AIR HOSE ON CLYCLONES HOT MATERIAL DISCAHRGED FROM AROUND CLEAN OUT AIR LANCE.

MATERIAL SAMPLER PLUGGED UP. EMPLOYEE THOUGHT THE MOTOR WAS TRIPPED OUT BUT IT WAS NOT. HE STUCK HIS RIGHT HAND IN SCREW TO CHECK FOR MATERIAL. THE SCREW WAS STILL TURNING CAUSING THE TIP OF H ISRIGHT MIDDLE FINGER TO BE CUT OFF.

EMPLOYEE WAS OPERA TING A MOTOR CONTROL VALVE IN A MANUAL STATE LOCALLY MANUAL LEVER KICKED OUT & THE HAND WHEEL SPUN BACKWARDS THE HANDLE ON THE HAND WHEEL STRUCK HIS RT.WRIST BREAKING IT

EMPLOYEE WAS OPERATING A PNEUMATIC IMPACT WRENCH WITHOUT WEARING A FACE SHIELF ONLY SAFETY GLASSES METAL PARTICLES FINE WERE BEING BLOW AROUND AND FEW LODGED IN HIS LEFT EYE.

EMPLOYEE WAS OPERATING A PNEUMATIC IMPACT WRENCH WITH-OUT WEARING A FACE-SHIELD, ONLY SAFETY GLASES. METAL PARTICLES (FINE) WERE BEING BLOWN AROUND AND A FEW LODGED IN HIS RIGHT EYE.

EMPLOYEE WAS ATTEMPTING TO CHIP AWAY THE REMAING STUB OF A SLEDGE HAMMER HANDLE THAT WAS STELL AFFIXED INTO THE SLEDGE HEAD WITH A WELDING SLAG CHIPPING HAMMER THE HAND THAT WAS STABLIZING THE SLEDGE HEAD SLIPPED AS HE WAS COMMING ON DOWN STROKE WITH THE CHIPPING HAMMER THUS CONTACTING HIS LEFT WRIST PUNCTURING IT.

EMPLOYEE WAS USING A LARGE HIGH SPEED PEDESTAL GRINDER TO GRIND EDGE DOWN ON A 1INCH WASHER HIS HAND SLIPPED & HIS FINGER CAME IN CONTACT WITH GRINDING WHEEL CAUSING INJURY TO HIS RT.FINGER

EMP WAS WELDING3A PIECE OF SHEET METAL WHEN IT F ELL DOWN ONTO HIS SAFETY BOOT. THE METAL PENITRATED THE BOOT JUST BEHIND THE SAFETY TOE, AND LACERATED HIS TOE

DRIVING DOWN HA6L ROAD IN 651 CAT PAN WHEN VEHICLE HIT A PILE OF ROCK LEFT BY AN INDEPENDENT HAULER VEHICLE VEERED RT EMPLOYEE LURCHED FORWARD HITTING HEAD ON THE STEERING WHEEL

OPERATOR DROVE 2OE TO THE EXCAVATION AND AS HEW WAS TURNING AROUND TO OPERATE THE BUCKET THE BACK HOE APPEARED TO JUMP OFF INTO THE HOLE AND PINNED I.NAME CAUSING HIS INJURY

EMPLOYEE WAS GR3NDING ON A PIPE LINE THAT IS UNDER CONSTRUCTION, EPOXY RESIN DUST FROM THE COATING ON THE PIPE LINE WAS LIBERATED INTO THE AMBIENT AIR CAUSING MINOR SECOND. MAJOR FIRST DEGREE BURNS TO THE T3SSUE SURROUNDING THE EYES.

OPERATOR GOT TO2 CLOSE TO THE EDGE OF A SLOPED AREA HE MANEUVERED THE EQUIPMENT SO IT WAS FACING UPHILL INSTEAD OF WAITING TO BE PULLED UP AND OUT BY A DOZER HE GAVE IT THROTTLE AND TURNED THE WHEEL THIS IS 5N ARTICULATED MACHINE THE MACHINE LURCHED AND ROLLED ONTO ITS SIDE THE OPERATOR JUMPED FREE AND CLEAR OF THE MACHINE

EMPLOYEE WAS CLEANING MATERIAL FROM AREA AROUND FLOP GATE. GATE STUCK & HE WAS USING A JACK HAMMER TO LOOSEN GATE. HAMMER SLIPPED & GATE KICKED BACK, PINNING HIS RIGHT HAND BETWEEN HAMMER & ED GE OF FRAME.