Buscar en el registro

Dozer on edge of wall, slipped over.

EE TRAMMED ESCAVATOR OVER ROUGH TERRAIN AT TOO HIGH RATE OF SPEED CAUSING ABRUPT MOVEMENT AND EVENTUAL PAIN IN LOWER BACK.

MATERIAL BEING EXCAVATED FROM HIGHWALL CAME LOOSE FELL FROM WALL THRU CAB AND STRUCK VICTIM ON LEFT LEG AND RIGHT KNEE CAUSING SCRAPES & BRUISES. FIRST AID ONLY NO MEDICAL TREATMENT ADMINISTER D

EE WAS IN PROCESS OF OPERATING THE CONTROL LEVERS ON A D-65 EX-12 KOMATSU DOZER. THE MOVEMENT OF THE LEVERS TO TRAM & MANEUVER MACHINE CAUSED PAIN IN LEFT HAND & EVENTUAL PULLED LIGAMENT IN HA ND DIAGNOSIS.

EMPLOYEE WAS SCALING HIGHWALL WITH 350C CAT EXCAVATOR ON UNDETECTED ROCK OF SMALL SIZE WAS UNDETECTED BY INJURED. ROCK HIT PROTECTIVE CAB, CAUSING JAR AND BRUISE TO RIGHT LEG. CAB WAS POSITION ED AWAY FROM HIGHWALL DURING THE PROCESS OF SCALING HIGHWALL.

VICTIM WAS OPERATING CAT D11N DOZER IN ROAD PREPARATION WORK. THE ROADWAY BECAME SOFT AND ELEVATED, HIDDEN AREAS CAUSED TO DOZER TO SLIDE & OVERTURN. THE VICTIM RECEIVED INJURY TO LEFT SHOULD ER AND ONE RIB. TREATED & RELEASED AFTER INITIAL TREATMENT. (RAIN & VISIBILITY WERE FACTORS).

EMPLOYEE WAS OPERATING DOZER(CAT D-ION) ON SPOILAREA,BACKED UP AND OVER ROCK IN ROADWAY, TRACKEDSLIPPED OFF ROCK,JARRED EMPLOYEE CAUSING PAIN IN NECK AREA FROM SUDDEN JAR & IMPACT.

EE WAS USING A 1 1/2" AIR IMPACT TOOL WHILE STANDING ON LADDER AND REACHING OVER HEAD TO TIGHTENCOLLET BOLTS OF 922-C CAT FRONT END LOADER BOOM PINS. EE FELT SMALL PAIN TO LOWER BACK, NOT SIGN IFICANT AT TIME. REPORTED 2 DAYS LATER AS STRAINED LOWER BACK.

EMPLOYEE OPERATING 375 KOMATSU DOZER, CLEANING HIGHWALL OF DEBRIS AND TREES, SLID OFF TREE AGAINST HIGHWALL WITH DOZER FRAME, CAUSING SUDDEN IMPACT IN CAB AND SEAT COMPARTMENT .

WHILE GRINDING METAL BOX, EMPLOYEE FELT OBJECT ENTER EYE, METAL CAUSED DISCOMFORT TO EMPLOYEE LATER IN THE DAY AND WAS REMOVED IN EMERGENCY ROOM. EMPLOYEE STATED HE WAS WEARING SAFETY GLASSE S.

OPERATOR WAS REMOVING OVERBURDEN ON CAT DION BULL DOZER AND WAS ATTEMPTING TO BACK FILL AGAINST HIGHWALL. OVERBURDEN WAS ROUGH CAUSING THE MACHINE TO SUDDENLY JERK, RESULTING IN BACK INJURY. O PERATOR WAS SEEN BY A DR AND WAS ADVISED TO TAKEA FEW DAYS OFF AND RETURN TO DR ON 9-2-99 FOR AN X-RAY.

OPERATOR WAS REMOVING OVERBURDEN, WHICH CONTAINED LANRGE SNADSTONE ROCKS. THIS CONDITION SOMETIMES CAUSES THE MACHINE TO SUDDENLY JERK & JAR. OPERATOR STATED AT THE END OF SHIFT, HIS NECK WAS HURTING. THE NEXT MORNING IT WAS WORSE, DR., STATED THAT HE HAD SPRAINED NECK AND UPPER BACK. ADVISED HIM TO TAKE A FEW DAYS OFF AND SHOULD BE OKAY.

EMPLOYEE WAS CUTTING METAL WITH A TORCH, THEN USING A DIE GRINDER AND AIR CHISEL TO REMOVE SLAG AND DIRT, A PIECE OF METAL GOT INTO RIGHT EYE. EMPLOYEE WAS USING SAFETY GLASSES AT THE TIME.

THE EMPLOYEE WAS OPERATING THE EXCAVATOR PULLING ON A ROCK THE BUCKET SLIPPED OFF THE ROCK CAUSING HIM TO BE JERKED AROUND IN THE MACHINE HURTING HIS NECK & STOMACH AREA

THE EMPLOYEE WAS OPERATING A DRILL. HE HAD THE LEFT DOOR OPEN AND HIS FOOT OUT OF THE CAB RESTING ON THE STEEL BRAKE WRENCH. WHILE CHANGING THE STEEL, HE SWUNG THE CAROUSELAROUND AND HIT HIS FOOT MASHING IT.

THE EMPLOYE EWAS GETTING READY TO GO INTO A CUT TO BOLT THE TOP. HE PULLED THE BOLTER INTO THE FIRST ROW OF BOLTS TO BE BOLTED. AS THE OFF-SIDE PINENR MAN, HE WAS KNEELING DOWN WITH HIS LEFT LEG UP OPERATING THE AUTO TEMPORARY ROOF SUPPORT. WHEN THE ATRS TOUCHED THE TOP, THE TOP CAME DOWN AND HIT HIS LEFT KNEE.

EMPLOYEE WAS TRIMING A PIECE OF METAL FROM BOTTOM OF MINER WITH A TORCH TIP POPPED ON TORCH CAUSING HOT MATERIAL TO BE THROWN BACK IN HIS FACE UNDER HIS SAFETY GLASSES

THE EMPLOYEE WAS OPERATING THE MINER.THE MINER BUCKED ON HIM,CAUSING HIM TO BE THROWN AGAINST THE CANOPY WHEN HE HIT HIS HEAD HURTING HIS NECK.

EMPLOYEE WAS OPERATING PINNER & A PIECE OF THIN DRAW ROCK (24INX32IN&2IN THICK) FELL FROM BETWEEN TWO ROOF BOLTS & HIT HIM IN THE LOWER BACK

THE EMPLOYEE WAS OPERATING A ROOF BOLTER, WHEN A ROCK FELL FROM THE ROOF AND HIT HIM ON THE RIGHT SHOULDER. THE ROCK WAS A THIN ROCK APPROX. 8" LONG.

THE EMPLOYEE WAS OPERATING AROOF BOLTER WHEN A BOLT FLEW BACK AND HIT HIM IN HIS LEFT EYE. HIS DIAGNOSIS WAS ABRASION TO CORNEA OF LEFT EYE.

THE EMPLOYEE WAS OPERATING THE ROOF BOLTER. HE RAN INTO AN ANGLE PLATE HANGING FROM THE ROOF AND STOVE HIS NECK UP.

STANDING ON BLADE OF DOZER WELDING PLACE ON HAULER STARTED TO TURN AROUND HUNG FOOT TWISTED HIS R KNEE

THE EMPLOYEE WAS OPERATING A ROOF BOLTER WHEN HE CAUGHT HIS RIGTH THUMB BETWEEN THE POT AND BOOM OF THE BOLTER AND MASHED IT.

WAS OPERATING ROOF BOLTER DRILLING A HOLE,WHEN A PIECE OF METAL FLEW INTO HIS RIGHT ARM.

THE EMPLOYEE WAS UNDER A DOZER USING AN IMPACT WRENCH TO REMOVE THE ROCKGUARD FROM THE ROLLER FRAME, WHEN A PIECE OF METAL FLEW IN HIS EYE.

WAS INSTALLING BELTS AND A ROCK FELL FROM THE ROOF OF THE MINE CAUSING HIS RIGHT ARM TO BE CAUGHT BETWEEN THE ROPES.

EMPL WALKED UP TO BOLTING MACHINE,KNELT DOWN BESIDE IT ON LEFT KNEE AND ROCK FELL FROM BEHIND HIM ,LANDED ON LEFT ANKLE.

THE EMPLOYEE WAS RUNNING THE COAL LOADER AND GOT THE CANOPY OF THE LOADER IN THE RIB. COAL POPPED OUT OF THE RIB INTO HIS RIGHT EYE.

OEPR ROOF BOLTER RAISE UP HIT BACK AGAINST BROKEN BAND HANGING DOWN

WELDING ON A HAULER AND THAT EYE. HIS RIGHT STARTED BOTHING HIM. WENT TO HOSPITAL THAT NIGHT AFTER HIS SHIFT WAS OVER. DOCTOR ON DUTY ADVISED HIM TO SEE AND EYE DOCTOR.

INJURED WAS GRINDING SOME METAL ON A LOADER WHEN A PIECE OF METAL FLEW OFF THE BIEGRINDER HITTING INJUREDS LEFT EYE.

CUTTING PIECE OF DRILL STEEL. STEEL ROLLED OVER ON HIS LEFT LEG CAUSING INJURY.