Buscar en el registro

Excavator was working in Redwine pit, highwall collapsed causing rock to fall on excavator. This caused a fatal injury to operator.

Employee was removing a loader tooth, he struck tooth and a small piece of metal came off of the tooth and lodged under the skin of the left knee.

Dismounting a rock truck, missed hand rail with right hand, foot slipped and he fell. Machine was wet from rain.

unloading AN from bulk unit, handle slipped, arm hit placard, cut forearm

Dozer on edge of wall, slipped over.

The engine on a rock truck caught on fire. It looked like a hose blew spewing fuel or oil onto hot engine.

EMPLOYEE WAS IN PROCESS OF CLIMBING A 992 C CAT FRONT END LOADER, WHEN ENTERING OPERATORS COMPARTMENT ,FELT A SHARP PAIN IN MID RIGHT LOWER BACK AREA. WHILE TRYING OPERATE FRONT END LOADER PAIN BECAME MORE INTENSE , AT THAT TIME CO WORKER NOTIFIED FOREMAN OF INJURY .

Employee was lifting a filter box from filter trailer , caused a sharp pain to right arm and chest area , which ended as a strain to muscle of arm and chest area

Employee was in process of removing bolts and hardware from a 992d loader cab area with a 1/2" air gun. Air gun was left on cab floor area, while employee exiting cab area to ground by means of a portable ladder caught air gun hose and pulled air gun down against right jaw and face area.

EMPLOYEE , WHILE TRYING TO STEP DOWN OFF 777 A HAULER LADDER TO GROUND, STEEPED ON UNLEVEL GROUND SPRAINED RIGHT ANKLE

EE WAS IN PROCESS OF LIFTING A METAL PLATE. WHILE BENDING DOWN TO LIFT OBJECT UP, EE STRAINED LOWER BACK.

EE WAS IN PROCESS OF CLOSING THE DOOR OF A DK45 DRILL TECH HIGHWALL DRILL, WHEN CLOSING DOOR EE CAUGHT LEFT THUMB AGAINST DOOR JAM AND HINGED AREA.

EMPLOYEE WAS IN PROCESS OF BREAKING COAL IN PIT AREA WITH A 988 B CAT FRONT END LOADER, FRONT END LOADER BUCKET CAUGHT GROUND AND STOPPED ABRUPTLY, CAUSING EE TO BUMP INTO FRONT END LOADER STEERING WHEEL.

EE WAS CHECKING BATTERIES ON D-10 DOZER (CAT). A METAL BATTERY COVER HAD BEEN RAISED TO GAIN ACCESS TO BATTERIES. HE FAILED TO SECURE LID COVER. HE WAS STRUCK BY COVER WHILE WORKING ON BATTERI ES. THIS COVER IS HINGED AND ATTACHED TO MACHINE FRAME.

EE TRAMMED ESCAVATOR OVER ROUGH TERRAIN AT TOO HIGH RATE OF SPEED CAUSING ABRUPT MOVEMENT AND EVENTUAL PAIN IN LOWER BACK.

MATERIAL BEING EXCAVATED FROM HIGHWALL CAME LOOSE FELL FROM WALL THRU CAB AND STRUCK VICTIM ON LEFT LEG AND RIGHT KNEE CAUSING SCRAPES & BRUISES. FIRST AID ONLY NO MEDICAL TREATMENT ADMINISTER D

EMPLOYEE INJURED RIGHT GROIN AREA, WHILE STEPPING UP ON LADDER TO GAIN ACCESS TO BULK BIN COVER TO DETERMINE LEVEL OF BULK IN BIN.

EE WAS IN PROCESS OF OPERATING THE CONTROL LEVERS ON A D-65 EX-12 KOMATSU DOZER. THE MOVEMENT OF THE LEVERS TO TRAM & MANEUVER MACHINE CAUSED PAIN IN LEFT HAND & EVENTUAL PULLED LIGAMENT IN HA ND DIAGNOSIS.

EMPLOYEE WAS IN PROCESS OF STEPPING OFF OF 777-A HAUL TRUCK LADDER. WHILE STEPPING OFF SPRAINED LEFT ANKLE WHEN CONTACT WAS MADE WITH GROUND.

EMPLOYEE WAS SCALING HIGHWALL WITH 350C CAT EXCAVATOR ON UNDETECTED ROCK OF SMALL SIZE WAS UNDETECTED BY INJURED. ROCK HIT PROTECTIVE CAB, CAUSING JAR AND BRUISE TO RIGHT LEG. CAB WAS POSITION ED AWAY FROM HIGHWALL DURING THE PROCESS OF SCALING HIGHWALL.

VICTIM WAS OPERATING CAT D11N DOZER IN ROAD PREPARATION WORK. THE ROADWAY BECAME SOFT AND ELEVATED, HIDDEN AREAS CAUSED TO DOZER TO SLIDE & OVERTURN. THE VICTIM RECEIVED INJURY TO LEFT SHOULD ER AND ONE RIB. TREATED & RELEASED AFTER INITIAL TREATMENT. (RAIN & VISIBILITY WERE FACTORS).

EMPLOYEE WAS OPERATING DOZER(CAT D-ION) ON SPOILAREA,BACKED UP AND OVER ROCK IN ROADWAY, TRACKEDSLIPPED OFF ROCK,JARRED EMPLOYEE CAUSING PAIN IN NECK AREA FROM SUDDEN JAR & IMPACT.

EE WAS USING A 1 1/2" AIR IMPACT TOOL WHILE STANDING ON LADDER AND REACHING OVER HEAD TO TIGHTENCOLLET BOLTS OF 922-C CAT FRONT END LOADER BOOM PINS. EE FELT SMALL PAIN TO LOWER BACK, NOT SIGN IFICANT AT TIME. REPORTED 2 DAYS LATER AS STRAINED LOWER BACK.

EMPLOYEE OPERATING 375 KOMATSU DOZER, CLEANING HIGHWALL OF DEBRIS AND TREES, SLID OFF TREE AGAINST HIGHWALL WITH DOZER FRAME, CAUSING SUDDEN IMPACT IN CAB AND SEAT COMPARTMENT .

EE BECAME WEAK FROM HEAT & LOSS OF FLUID DUE TO 95 DEGREE TEMPERATURE & HUMIDITY.

WHILE GRINDING METAL BOX, EMPLOYEE FELT OBJECT ENTER EYE, METAL CAUSED DISCOMFORT TO EMPLOYEE LATER IN THE DAY AND WAS REMOVED IN EMERGENCY ROOM. EMPLOYEE STATED HE WAS WEARING SAFETY GLASSE S.

EE WAS EXITING LOADER (992) CAB BY MEANS OF EQUIPMENT LADDER, STEPPED TO GROUND FROM BOTTOM STEP (2 FT) TWISTED BACK.

EE WAS IN THE PROCESS OF STEPPING FROM BULK TRUCK WHEN HE SLIPPED OFF OF STEP AND SPRAINED RIGHT ANKLE AND FRACTURE. (APPROXIMATELY 2' DROP)

OPERATOR WAS REMOVING OVERBURDEN ON CAT DION BULL DOZER AND WAS ATTEMPTING TO BACK FILL AGAINST HIGHWALL. OVERBURDEN WAS ROUGH CAUSING THE MACHINE TO SUDDENLY JERK, RESULTING IN BACK INJURY. O PERATOR WAS SEEN BY A DR AND WAS ADVISED TO TAKEA FEW DAYS OFF AND RETURN TO DR ON 9-2-99 FOR AN X-RAY.

OPERATOR WAS REMOVING OVERBURDEN, WHICH CONTAINED LANRGE SNADSTONE ROCKS. THIS CONDITION SOMETIMES CAUSES THE MACHINE TO SUDDENLY JERK & JAR. OPERATOR STATED AT THE END OF SHIFT, HIS NECK WAS HURTING. THE NEXT MORNING IT WAS WORSE, DR., STATED THAT HE HAD SPRAINED NECK AND UPPER BACK. ADVISED HIM TO TAKE A FEW DAYS OFF AND SHOULD BE OKAY.

EMPLOYEE WAS CUTTING METAL WITH A TORCH, THEN USING A DIE GRINDER AND AIR CHISEL TO REMOVE SLAG AND DIRT, A PIECE OF METAL GOT INTO RIGHT EYE. EMPLOYEE WAS USING SAFETY GLASSES AT THE TIME.

EE WAS EXITING HIS TOOL TRUCK, WHEN HIS RIGHT FOOT LANDED ON UNEVEN GROUND CAUSING HIS RIGHT ANKLE TO CREEL.

EE WAS ATTEMPTNG TO STEP OFF REAR BUMPER OF TOOLTRUCK IN DOING SO HE SPRAINED HIS ANKLE. GROUND WAS FROZEN

INSTALLING A BUSHING IN THE BOOM OF A PC220 EXCAVATOR WITHA HAMMER WHEN A PEICE OF THE BUSHING BROKE OFF HITTING HIM IN THE UPPER PART OF THE ARM.

THE EE WAS REPAIRING A LOADER RAISED UP AND HIT HIS HEAD ON A PIECE OF ANGLE IRON CUTTING HIS HEAD. HE DID NOT MISS ANY WORK BUT DID HAVE STITCHES.

THE MECHANIC WAS PULLING THE ENGINE OUT OF A HAULER. HE STARTED TO STEP FROM THE FRAME TO THE LADDER WHEN HIS FOOT SLIPPED CAUSING HIM TO TWIST HIS LEFT KNEE.

THE EMPLOYEE WAS HELPING A MECHANIC TO SET SOME CRIB BLOCKS TO ACK UP A LOADER, AND MASHED HIS RIGHT RINGER FINGER.

EE WAS STEPPING DOWN OFF HIS DOZER AT THE END OF THE SHIFT. HE STEPPED ON THE TRACK, SLIPPED AND FELL TO THE GROUND. THE TRACK WAS MUDDY DUE TO THE FACT THAT WE HAD WATERED THE ROAD TO KEEP TH E DUST DOWN. SAFETY HAND RAILS WERE THERE, BUT EVIDENTLY NOT USED.

THE EE WAS OPENING THE UTILITY BOX DOOR ON A DOZER. AT THE SAME TIME OTHER WAS CLOSING THE DOOR TO THE OPERATION COMPARTMENT AND THE TWO DOORS CROSSED CAUSING A PINCH POINT WHERE EE FINGERS WE RE.

THE EE WAS CLIMBING ONTO A HAULER TO DO SOME MECHANICAL REPAIRS WHEN PAIN HIT HIM IN HIS RIGHT LOWER BACK AND CONTINUED TO HURT.

EE WAS USING A SLEDGEHAMMER TO REMOVE A BUCKET PIN FROM A LOADER WHEN A METAL FRAGMENT HIT HIM UNDER HIS RIGHT EYEBROW.

HE WAS DOING MECHANICAL REPAIRS TO A DOZER. WHILE KNOCKING A CHIESAL OUT OF TWO PIECES OF METAL WITH A HAMMER, THE CHIESEL FLEW OUT AND HIT HIM IN THE MOUTH.

THE EMPLOYEE WAS INSTALLING A TORQUE IN A LOADER. HE SLIPPED AND FELL HITTING HIS LEFT KNEE AGAINST THE FRAME. AT THE TIME IT HAPPENED, HE DID NO THINK IT WAS SERIOUS ENOUGH TO SEEK MEDICAL AT TENTION. HOWEVER ON 12-22-95, HIS KNEE WAS SWOLLEN AND HE WAS HAVING PAIN. HE WENT TO THE DOCTOR.

THE EMPLOYEE WAS HELPING TO BIND A TRANSMISSION DOWN ON A TIR ETRUCK WHEN A WRENCH SLIPPED AND HIT HIS LEFT HAND BRUISING HIS MIDDLE FINGER.

THE EMPLOYEE WAS WELDING ON THE BUCKE TOF A LOADER STEPPED IN A HOLE, SLIPPED AND FELL ON HIS LEFT KNEE. HE DID NOT SEE A DR UNTL 12-30-94.

THE EMPLOYEE WAS OPERATING A DOZER DOING SOME RECLAMATION WORK, CUT INTO A NATURAL GASLINE, CAUSING A EXPLOSION. DUE TO EXTENSIVE BURNS, HE DIED 10-23-94. THE DOZER HE WAS OPERATING WAS ALSO D ESTROYED IN THE EXPLOSION.

THE EMPLOYEE WAS OPERATING A DOZER IN THE SAME AREA AS FATALLY INJURED EMPLOYEE. WHEN FATALLY INJURED EMPLOYEE CUT INTO THE GASLINE AND THE EXPLOSION OCCURRED, THIS EMPLOYEE WENT TO HELP HIM E SCAPE THE FIRE AND GOT CLOSE TO THE HEAT CAUSING BURNS TO SEVERAL AREAS OF HIS BODY, BUT THE BURNS WERE NOT CRITICAL. HIS DOZER WAS TOTALLY DESTROYED IN THE EXPLOSION.

THE EMPLOYEE WAS CLIMBING DOWN THE LADDER TO GET OFF OF HIS HAULER NEGLECTED TO SEE WHERE HE WASON THE LADDER WENT TO STEP OFF ONTO THE GROUND & R EALIZED THAT HE STILL HAD STEPS TO GO THEREFO RE HE SAID HE HURT HIS BACK

THE EMPLOYEE WAS WELDING ON A DOZER ARM, WHEN THE GREASE ON THE INSIDE OF THE ARM CAUGHT FIRE, AND BLEW OUT OF THE CRACK BURNING HIS RIGHT ARM AND A SMALL PLACE ON THE RIGHT SIDE OF HIS NECK.

THE EE WAS TRYING TO PULL A TREE BRANCH OUT OF THE TRACKS OF HIS DOZER WHEN A LIMB CAME BACK AND HIT HIM IN THE EYE. HE DID NOT FEEL IT WAS NECESSARY TO SEE A DR UNTIL 4-25-94. HE RETURN TO WO RK 4-26-94. HE WAS REFERRED TO A EYE SPECIALIST,WHO STATED THAT HE HAD CUT THE CORNEA IN HIS EYE AND MAY HAVE TO HAVE I REPAIRED THRU LASER SURGERY.