Buscar en el registro

Employee got out of scoop and said he hurt his lower mid section.

Employee was standing in the shop, when he was hit by a 4 wheel ride. * 1/18/10: EE returned to work on 1/17/10. Worked one shift and part of second. Alleged he could not work without hurting his shoulder.

As the driver was ascending a hill on the haul road, the truck stalled and slowly rolled back approx 60'. The coal truck then overturned due to the slope of the berm, it was resting on the passenger side of the vehicle.

Employee was operating the scoop when a piece of coal came in inside (sideways-because canopy was on scoop) and struck employee behind right ear. 3 stitches required

After loading his shuttle car, ee put his hand on the hand hold mount to the canopy of the shuttle car. As he started to move the car, a roof bolt plate spun around and lacerated his finger.

Pinion shaft broke in rear end - the ride lost brakes, one man hurt right leg and neck.

EE WAS OPERATING A HAUL TRUCK. THE RIGHT FRONT STRUT BROKE ON THE TRUCK. THE RIGHT FRONT OF THE TRUCK HIT THE FRONT TIRE. EE SAID HE HURT HIS BACK. THE BROKEN STRUT LET THE TRUCK SIT DOWN ON THE TIRE.

EE WAS DRIVING A 1997 CHEVY BLAZER IN BIG STONE GAP, THE LUG NUTS CAME OFF & A REAR TIRE CAME OFF THE TRUCK. THE TRUCK CAME TO A STOP ON THE SIDE OF THE ROAD. EE STATED HE HAD HURT HIS BACK. EE DID NOT GET MEDICAL ATTENTION UNTIL 6/30/03.

EE BACKED THE HAUL TRUCK HE WAS OPERATING OVER THE HILL AT THE DUMP OVER TURNING THE TRUCK RESULTING IN A CUT TO HIS HEAD.

EMPLOYEE WAS RETURNING TO THE WASHER FROM THE SLATE DUMP. THE SLATE TRUCK HE WAS DRIVING LEFT THE ROADWAY AND TRAVELED APPROX. 100' DOWN THE SLOPE. HE RECEIVED A SMALL CUT BEHIND HIS EAR AND BRUISES ON HIS BODY.

EMPLOYEE WAS OPERATING AN END LOADER, FEEDING THE RAW COAL BIN. HE STATED HE EITHER DID NOT ENGAGE THE CLUTCH OR APPLIED THE WRONG PEDAL CAUSING THE ENDLOADER TO GO INTO THE BIN.

EE WAS OPERATING A MANTRIP WHEN THE MANTRIP CAR HIT A HOLE IN THE ROADWAY RESULTING IN A STRAINED MUSCLE IN THE MIDBACK OF EE

ACORDING TO DRIVER HE WAS CLIMBING (MINER HILL) HE STATED HIS TRUCK ROLLED INTO BERM ON LEFT SIDE AND OVERTURNED ON LEFT SIDE RESULTING IN CHIP BONE OT RIGHT ANKLE.

INJURED WAS IN MANTRIP COAT WAS HANGING OUT OVER SIDE HE REACHED FOR COAT & MANTRIP MOVED HITTING LEFT INDEX FINGER BETWEEN MANTRIP & RAILRUNNER

INJURED WAS PUSHING ROCK OFF #1 BRIDGE & #2 BRIDGE MOVED BUMPING #1 BRIDGE INTO INJUREDS RT LEG BRUISING

INJURED HIT LEFT EAR ON CANOPY CUTTING IT REQUIRING 5 STICHES.

EMPLOYEE HIT LEFT EAR ON ROOF PLATE REQUIRING 9 STITCHES.

36" DIAMETER BELT PULLEY BROKE APART AND A PIECE CAME THROUGH GUARD STRIKING INJURED IN RIGHT LEG ABOVE ANKLE.LEG WAS CUT IN A WAY THAT FOOT ABOVE ANKLE WAS AMPUTATED BY DOCTOR.

OPER MOTOR WENT THROUGH LOW TOP BACK AND NECK INJ

INJURED WAS RIDING IN RAILRUNNER AND DID NOT GET DOWN WHEN RAILRUNNER PASSED UNDER A CROSSBAR. CROSSBAR STRUCK INJURED IN SHOULDER.

INJURED MASHED FINGER ON SCOOP CANOPY REQUIRING 12 STITCHES.

INJ DRIVING SHUTTLE CAR AND RAN OVER TIMBER,BOUNCED HIM UP AND HE LANDED ON BATTERY LIGHT CAUSING BRUISE IN LOWER BACK.

INJURED WAS ON KNEES IN SCOOP BUCKET WHEN BUCKET WENT AGAINST TOP HITTING HIS BACK

MUCKING ON BELT ROCK BOUNCED OFF BELT AND STRUCK INJ ON BACK INJ LOST TIME DATE STARTE 01-18-89.

RIDING RAILRUNNER OUTSIDE TURN CURVE OUTSIDE TOLLEY POLE CAME OFF WIRE HIT TOLLEY STEEL ANCHOR POLE CAUSING POLE TO COME BACK STRIKING I.NAME UNDER LEFT ARM

SHEET METAL ON TOP OF MOTOR CAUSHT ON CRIB AND PULLED BACK CAUSING HIM A CUT ON NECK AND NOSE.

INJ HAD VICTOLIC WATER LINE LOADED ON SCOOP WHEN HE TURNED CORNER WATER LINE CAUGHT AGAINST SCOOP FRAME AND RELEASED STRIKING I.NAME ACROSS NOSE.

OPERATING SHUTT5E CAR I.NAME SPUN WHEELS ON DOWN HILL GRADE ALLOWING CAR TO SLIDE INTO RIB HURTING HIS ARM AND SIDE.

INJURED PUTTING3OIL IN SHORT SHAFT OF HOUSING MINER AND MINER OPERATOR STARTED CONVEYOR CHAIN ON MINER AND THE ARM ON THE POT STRUCK I NAME ON LEFT ANKLE.

EMPLOYEE STATED3THAT HE WAS OPERATING SHUTTLE CAR & RAN OVER ROCK OR TIMBER & JAMMED HEAD AGAINST CANOPY

THE INJURED WAS3CRANKING TAKE-UP AT 104 BELTHEAD AND BELT SURGED CAUSING CRANK TO MOVE IN RESERSE AT A HIGH SPEED STRIKING INJURED ON RIGHT WRIST.

EMPLOYEE STATES3THAT HE WAS ADVANCING OUT-BY TO TURN OFF BELT SWITCH WHEN TAIL PIECE TOR LOOSE AND CAME THROUGH FIRE CURTAIN AND CAUGHT HIM.

INJURED WAS RID3NG BELT AGAINST COMPANY POLICY OVER OVERCAST AND GOT CAUGHT BETWEEN TOP AND BELT CAUSING HIM A BACK INJURY.

WHILE DRIVING A3SHUTTLE CAR AT FULL SPEED, INJURED HURT BACK WHEN HE HIT BAD ROADWAY.

RIDING ON TOLL2 MOTOR,POLE CAME OFF DC LINE MOTOR TRIED TO CATCH POLE AND STRAINED LEFT SHOULDER.

I NAME WAS OPER5TING MOTOR UNDER OVERCAST WHILE PASSING UNDER HE DIDN'T LOWER HEAD LOW ENOUGH STRIKING HEAD AGAINST FRONT WALL.

I.NAME WAS SPLI7ING BELT & BELT STARTED CAUSING BELT CLAMP TO CATCH LEG BETWEEN BOTTOM BELT & STRUCTURE.

WHILE OPERATING3SCOOP AT FAST SPEED I NAME HIT BUMP IN ROADWAY HURTING HIS NECK

WHIEL DRIVING T9UCK AT FAST SPEED I NAME HIT BUMP IN ROAD CAUSING HIM TO HURT HIS SHOULDER

INJ WAS DRIVING3SHUTTLECAR AT FAST SPEED AND HIT BUMP IN ROADWAY HURTING LOWER BACK

MANTRIP AT THE 7OP OF THE HILL WENT INTO A SKID AND RAN INTO EMPLOYEES MANTRIP CAUSING HIM TOHIT THE LOWER PART OF HIS BACK AGAINST THE HEADBOARD BRACE

EMPLOYEE I.NAME WAS IN PROCESS OF REMOVING A ROCK FROM TAIL PIECE WHEN THE SLATE BAR HE WAS USING CAUGHT SPLICE AND FORCED THE BAR INTO EMPLOYEES RIGHT SIDE CUTTING HIM

EMPLOYEE WAS RIDING ON BELT THAT WAS IN SCOOP WHEN THE BELT GOT CAUGHT ON BOLT AND ROLLED EMPLOYEE OVER ON SCOOP

EMPL REMOVING BLOCK OF COAL FROM BELT AT HEAD DRIVE WHEN LEFT HAND WAS CAUGHT BETWEEN COAL AND ROOF BECAUSE BELT WENT UP ABOUT TIME HE WAS REMOVING COAL.

EMPLOYEE WAS IN PROCESS OF CRIBBING FEEDER WHEN THE TRAM CHAIN BROKE AND HIT HIS RT ARM