Buscar en el registro

Operator of a 777C Rock truck came into contact with a berm located in the haul road and claimed pain in back.

EE was traveling down an embankment from Eagle creek #5 came into at right hand curve and turned over.

Employee was trouble shooting the tram switch on a rubber-tired mantrip when it moved unexpectingly causing injury to his right arm.

Employee was operating Caterpillar 665 challenger tractor with a box scraper attached to the back of it. When he backed up to unload the box scraper he ran over a rock that caused the machine to jerk sideways causing his head to jerk to the side. Doctor wants MRI before returning to duty.

Operator was on a 773 water truck when the water load shifted truning it on its side. Operator recieved a 1" laceration to his forehead requiring 6 stitches

Victim attempted to remove a nylon string from a turning stuck roller while belt was in operation. Roller began to turn, string caught victims right index finger resulting in a cut which required stitches. Victim finished shift and missed no work.

Operator was driving from the loading point to dump site when the front right wheel dropped into a low spot on the haul road causing operator to lunge forward and to the right. Seat belt stopped the operator and caused a sharp pain in his back and shoulder. Transported to the hospital for evaluation.

Operator was pulling coal from pit floor when the loader bucket came into contact with solid ground causing the operator to lunge forward. Operator complained of neck and back pain and was transported to the hospital for doctor evaluation.

Berm gave way while dumping rock load causing truck to fall over 400 feet, ejecting driver.

Loader dumped bucket of rock into truck - knocking down overhead radio.

The driver was coming down the haul road loaded and started sliding. He cut to the hill side and went into a sump.

Rock fell in hitting back of cab, injuring driver.

EE was driving a 777 CAT rock truck, while a loader operator in a 992G was was loading him. A rock came out of the loader bucket and hit the off side of the rock truck bed, jarring him and causing him to go side to side in cab of rock truck.

EE was loading a big rock into a 777 hauler when the rock came out of his bucket, jarring him. EE complained of back pain and left early, but returned the following shift and worked out the week. Over the weekend EE said his back worsened. He began missing work on Monday July 24,2006.

Truck wreck.

MECHANIC WAS CHANGING POWER STEERING PUMP ON CAT TRUCK. WHILE ACTIVATING THE SERVICE TRUCK BOOM, THERE WAS A SHORT CIRCUIT IN THE BOOM CONTROL WIRING CABLE, CAUSED BOOM TO DROP UNEXPECTEDLY. M ECHANIC TRIED TO MOVE OUT OF THE WAY OF THE BOOM WHILE IT WAS DESCENDING. BOOM STRUCK HIM ON THE LEFT SHOULDER.

EE'S COAL TRUCK CAME OUT OF GEAR AS HE WAS DRIVING DOWN A GRADE WITH A LOAD OF COAL. THE ENGINE DIED AND LOST STEERING CONTROL. HE JUMPED OUT OF THE TRUCK BEFORE IT WENT OVER THE HILL.

HE WAS DUMPING A TRUCK LOAD OF SPOIL ON AN ELEVATED DUMP SITE AND BACK UP TOO FAR AND HIS TRUCK ROLLED OVER (TOO CLOSE TO THE EDGE).

TAKING END LOADER TO PUSH TRUCK UP THE HAUL ROAD. HE LOST CONTROL AND JUMPED OUT OF THE END LOADER.

EE LOST CONTROL OF HIS ROCK TRUCK. HE JUMPED OUT, WAS STRUCK BY TH3E TRUCK. THE TRUCK THEN STRUCK AN EMBANKMENT AND OVERTURNED ONTO ITS TOP. EE SUSTAINED INJURIES TO HIS LEFT ARM & RIGHT LEG.

BRUISE TO HEAD AND CHEST. PUT TRUCK INTO DITCH LINE DUE TO LOSS OF CONTROL.

CONTRACTOR WAS OPERATING A COAL TRUCK. WHEN HE CAME TO A GRADE AND TRIED TO DOWN SHIFT HE MISSED A GEAR, WHILE TRYING TO GET THE TRUCK BACK IN GEAR. IT WAS PICKING UP SPEED. THE OPERATOR JUMPE D FROM THE TRUCK. THE TRUCK HIT THE BEARM AN OVERTURNED.

THE OPERATOR OF THE 777 ROCK TRUCK DIDN'T GET SQUARE WITH HIS DUMP AND BACKED THE OFF SIDE TIRE UP ON THE BERM. WHEN HE RAISED THE BED TH ETRUCK TURNED OVER. THE OPERATOR GRABED THE DOOR WIT H HIS LEFT HAND. IT MASHED HIS LEFT RING FINGER. OPERATOR WAS WEARING SAFETY BELTS.

OPERATOR PUT HIMSELF IN THE WRONG POSITION TO CLEAN THE HIGHWALL AND PULLED A ROCK ONTO THE LOADWER HE WAS OPERATING. DAMAGE TO LEADER--WINDSHIELD WAS BROKEN, LIGHT BAR WAS BENT, FRONT FENDER WAS BENT.

LOADER PICKED UP TRUCK ABOUT 10" OFF GROUND TO MOVE. TRUCK SLIDE OUT OF BUCKET AND FELL. THAT WHERE HE SAID IT HURT HIS BACK WHEN IT BOUNCED.

36539ACT COAL HAULER WAS GOING UP IN THE HOLLOW AT JESSE BRANCH TO GET DIESEL FUEL FOR HIS COAL TRUCK.HE WAS PREPARING TO CROSS THE MAINLINE RAILROAD TRACK WHEN HIS TRUCK WAS STRUCK BY A CSX L 63646TIVE HIS TRUCK WAS HIT BY THE TRAIN AND TURNED CROSSWAYS ON THE TRACK ABD BECAME LODGED BETWEEN THE LOCOMOTIVE AND A LOADED RAILRAOD CAR THAT WAS SITTING ON JESSE BRANCHES SIDING.

EMPL BACKED ROCK TRUCK INTO DUMP SITE AT ANGLE ALLOWING OFF SIDE TIRES TOO CLOSE TO EDGE.THIS CAUSED MATERIAL TO SLIDE OUT FROM UNDER,RESULTING IN TRUCKS ROLLING DOWN 53'EMBANKMENT.EMPL RECD L ACERATIONS TO HEAD,SHOULDER,ELBOW AND CONTUSION TO LEFT LEG.

EMPL WAS DRIVING 777 CATERPILLAR ROCK TRUCK HE HIT A ROUGH PLACE IN THE ROAD CAUSING HIS HEAD TO HIT THE TOP OF CAB JAMMMING HIS NECK