Buscar en el registro

Employee was assisting shop welder with hydraulic hammer housing being repaired. Employee used overhead crane to lift one end of hammer housing to enable cleaning and new seal prep. A lifting eye that was tack-welded to the end of the housing, broke free causing the hammer housing to fall to the floor and crush the employee's toes. Employee was wearing safety toed shoes.

Employee was in haul truck being loaded with material in pit. Loader was dumping material in bed of haul truck when a large boulder dropped out of loader bucket into haul truck bed and caused haul truck to shift abruptly. Thus, resulting in a strain to haul truck operator's neck and shoulders.

Was working on the SB2 with a loader when some of the SB2 fell and landed on the loader bucket causing the loader to bounce. Employees head hit the dome light and cut the top of his head.

THE TRUCK DRIVER RAN OVER A BUMP IN THE HAUL ROAD CAUSING HIM TO BE JARRED INSIDE THE TRUCK WHICH CAUSED HIM BACK PAIN. THE DRIVER WAS SEEN BY A PHYSICIAN AT WHICH TIME HE WAS DIAGNOSED TO HAVE A BACK STRAIN. DRIVER WAS GIVEN AN IMMEDIATE RETURN TO WORK STATUS WITH "NO BENDING GREATER THAN 6 TIMES PER HOUR" RESTRICTIONS. FOLLOW UP APPOINTMENT SCHEDULED FOR 9-18-2013

EE was being loaded with material when the bucket of the loader came down and hit the bed of the haul truck. EE was jarred when the bucket hit.

Bobcat was doing clean up at the hopper when haul truck backing up to dump didn't see the bobcat & bumped the back of bobcat with tire. Employee's neck was hurting.

Backing haul truck under loader bucket. The hyd. failed and the bucket came down on bed of truck. Ee twisted his neck.

Washing mud out of gyro, when belt was started up a rock fell out of gyro & hit the belt & bounced off hitting ee's little finger on handrail.

HAUL TRK WAS BEING LOADED WHEN A LARGE BOULDER JARRED THE TRK & CAUSED BACK PAIN TO EE

EE WAS OPERATING A WATER TRUCK AND HIT POTHOLE IN ROAD AND JARRED HIS BACK.

PIN CAME OUT OF LIFT ARM ON TERMINATOR AND BOOM FELL FORWARD AND JARRED EMPLOYEE IN LOADER.

EE WAS RIDING ON A PLANT SCREEN ON TRUCK BED WHEN SCREEN SHIFTED & BACK HIT EDGE OF BED. [REPORTED TO SUPER ON 9-10-97]

EE WAS DRIVING WATERTRUCK TO FILLUP BIG DRILL WHILE ON THE QUARRY ROAD HE NOTICED HE DID NOT HAVE ON HIS SEAT BELT, HE REACHED OVER TO BUCKLE HIS SEAT BELT, RAN OF THE EMBANKMENT AND OVERTUR END THE TRUCK.

EE STATES HE WAS BUMPED BY PICKUP TRUCK WHILE USING TELEPHONE AT PLANT OFFICE.

EMPLOYEE WAS RETURNING FROM DUMP AREA AND TURNED CORNER TO GO UP AN INCLINED ROADWAY WHEN HE TURNED INTO THE PATH OF A LOADED HAUL TRUCK.

EMPLOYEE WAS CLEANING DECKING OF THE C115 CONVEYOR WHEN HIS SCRAPER CAUGHT IN THE CONVEYOR.

DRIVING END DUMP & STUCK HEAD OUT WINDOW & GOT SAND IN EYE.

OPERATING A FRONT END LOADER & LUNGING INTO PILE TO LOAD BUCKET WHEN HE JARRED HIS BACK

CHANGING OIL IN CAT 773 TRUCK. OIL FILTER CAME LOOSE AND FELL UPSIDE DOWN ON ELMPLOYEES HAND HAT. HOT OIL WENT INTO EMPLOYEE'S EAR.

OPERATING A CAT 631E SCRAPER IN ROUGH TERRAIN, CAUSING A TWISTING ACTION THAT PULLED BACK MUSCLE.

EE HAD HIS HAND ON THE CONVEYOR DECKING WHEN A ROCK ROLLED OFF THE MOVING CONVEYOR STRIKING THE TIP OF HIS LEFT INDEX FINGER.

EMPLOYEE WAS CLEANING DECK UNDER FRONT FEEDER IN C-1 TUNNEL. HE WAS CLEANING BETWEEN DELIVERY ROLELR UNDER FRONT FEEDER. BELT GRABBED HOE ADN ROLLED LEFT HAND BETWEEN BELT ADN DELIVERY ROLLE R.

HAULING ROCK TO GYRO, SM ROCK BLEW IN EYE

EMPLOYEE WAS SITTING IN LOCOMOTIVE CAB WITH ENGINE AT 101 SPEED.HE BUMPED HIS ELBOW ON BRAKE LEVER.

EE WAS TRANING C-21 BELT BY MOVING IDLERS EE GAVE SIGNAL TOP BELT OTHER EE SOUNDED WAVING BUXX THEN STATED BELT WHEN HE HOPED FOR EE HE DID NOT SEE HIM HE WENT DOWN TO CHECK AFTER STOPPINGH BE LT.

EMPLOYEE WAS PUSHING ON A PICKUP TRUCK THAT WAS STUCK IN THE MUD

EMPL CLEANING BETWEEN ROLLER BRACKETS WITH BELT RUNNING WHEN BELT CAUGHT ARM BETWEEN BELT AND ROLLER FRAME.