Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Pulling canvas down in 2-1 and stepped in clay hole that caused the employee to fall and twist knee
Employee was attempting to pull a coupler cover from in between the top and bottom belt. The employee lost footing and fell on back. Employee was seen by a doctor and performed employee's regular duties until MRI results came in on 9/27/2024 and was placed on restricted duty due to protruding disks.
The employee was walking through #3 intersection when EE tripped and started to fall. The employee extended EE's left arm downward to help break EE's fall and suffered a separated shoulder.
Employee was using a prybar to reposition the oil tank on a dozer. EE's prybar slipped causing the employee to fall backward and hurt EE's lower back.
Preshifting section stepped in a hole in crosscut 4-5 and twisted right knee. EE was taken to the doctor and diagnosed with a torn meniscus and surgery was performed on 1-29-24. EE continued to work their normal duties until surgery.
Employee was looking for a sling in mud and water when EE lost EE's balance. EE's foot was suctioned in the mud causing EE's knee to twist.
EMPLOYEE WAS WALKING OUT OF AN OFFICE TRAILER THEY TOOK A STEP ONTO THE LANDING OF THE STEPS AND PIVOTED ON THEIR FOOT TO TURN. EE FELT A POP AND PAIN IN THE RIGHT KNEE WHILE TURNING. EE CONTINUED TO WORK FULL DUTIES UNTIL THE SURGERY DATE 8/18/2022.
The injured miner was crossing the beltline and slipped in muddy conditions while stepping off the beltline. When the injured miner slipped, was holding onto a chain and injured shoulder. The injured miner was not able to go to the shoulder specialist until August 3, 2021.
The injured miner was removing a large piece of rock that fell on top of the continuous miner. While applying force to the rock, the miner slipped and the miner's face contacted the rock and caused a laceration. Three sutures was required to close the wound.
EMPLOYEE WAS LOADING THE BOLTER. AS EE WAS CARRYING BOLTS EE STEPPED IN A HOLE IN THE BOTTOM. THE NEXT DAY EE WOKE UP WITH PAIN AND NUMBNESS IN RIGHT LEG FROM HIP TO FOOT. EE CONTINUED TO PERFORM NORMAL DUTIES UNTIL EE WAS PLACED OFF OF WORK ON 3/16/2021 BY EE'S PHYSICIAN.
Employee was crossing over the haulage unit when EE stepped down off EE stepped in a hole twisting knee. Employee continued working full duty until 10-05-2020 when the doctor placed EE on restricted duty. Employee is scheduled for surgery on 10-20-2020.
EMPLOYEE WAS WORKING IN DEEP MUD WHILE HANGING GUARDING AT DRIVE. WHEN EMPLOYEE WENT TO GET UP FOOT WAS STUCK CAUSING KNEE TO TWIST RESULTING IN A SMALL MEDIAL MENISCUS TEAR IN RIGHT KNEE. EMPLOYEE WORKED REGULAR DUTIES UNTIL SURGERY WAS PERFORMED 2/7/2020.
Employee slipped on ice in the parking lot while walking to rock truck. Employee was diagnosed with a herniated disc in lower back. Continued to work until surgery date on March 28, 2019.
Employee slipped going down ice-covered steps on Hitachi Shovel and fell, injuring back and neck. Employee continued to work normal job until ee was seen by orthopedic surgeon on 3/14/2019 and placed off work.
The employee was walking down three (3) steps to the concrete basement floor. As the employee was stepping from the last of the 3 steps to the basement, EE caught heel on the last step or the left foot slipped and EE tried to catch self to keep from falling which resulted in an injury to the left ankle.
Employee was walking in the pit and stepped on an uneven surface and twisted knee.
Slippery ground - pulling material line when it became stuck and injured pulled hard to loosen and tripped on ridge in mine floor.
Employee was raising the boom on the belt-head drive. EE was twisting screw jack on the belt drive when EE slipped and fell twisting EE's right knee. The accident occurred on 8/22/17. The EE returned to regular duties after the accident and continued to work until EE's shift on 8/25/17 - 8/26/17.
The employee was walking beside the Rail Road cars at the load out facility checking the doors on the cars. The employee stepped onto a rock and the rock rolled over and the employee fell into a small ditch. The employee continued to work and did not receive any medical treatment until 7/19/2017.
Contractor EE & co-worker were on the surface working on a rock dusting machine. After the repairs were completed, the IE was standing in front of the machine when the operator started the machine for testing. The IE started to step back & lost balance. IE reached out to grab something & got finger into an unguarded location resulting in cut to tip of finger.
The injured employee was riding the Mac 8 Mantrip to the end of the track. As the employee started to get off the Mantrip, employee pulled a muscle in the back of employee's left leg.
The miner was injured while walking along the belt-line. EE stepped into slippery mud, lost EE's footing and fell. EE's right ear contacted the metal structure and caused a laceration on EE's right ear.
Employee was pulling cable for CO system along the belt line. He was walking backwards and his left foot slipped in a hole and became lodged. As he fell backwards his body twisted causing his left ankle to break.
Employee was walking in parking lot, slipped on icy conditions and fell on back.
Employee was stepping out of the man basket to get extension cord twisting his knee. "Left Knee"
Employee slipped on ice while exiting his pickup truck in parking area of Refuse Site. He caught himself on his running board with his elbows and injured his left shoulder. Employee continued to work until 6/10/14 when he received arthroscopy surgery on his shoulder.
Employee was tightening skirt rubber on tight side of the belt in the draw off tunnel. Employee was not aware of his surroundings and stepped off the edge of the draw off tunnel. He fell approximately 7 1/2 feet into the tripper pit, resulting in an avulsion to the right side of his head.
Employee was moving the continuous miner to set up for daylight. While the employee was moving the miner, he twisted his ankle and sprained it.
Injured jumped down approximately 3' to ground twisting his right knee.
Standing on electric motor (This motor was locked out but he should not of been standing on it) reached for a hammer slipped off. Only about 12" off floor.
Victim was walking to get on Damascus buggy to come outside, he pulled a muscle in his right hip.
Tripped and fell into machine. A strap on the machine was hanging off the side, which cut his ear.
Employee was getting down from drill when he slipped on step falling to the ground. Employee hit on right leg and pulled muscle in lower right side of back.
Slipped off truck step and fell on knee.