Buscar en el registro

After shift ended, employee left the main building to the parking lot where there is one set of stairs before reaching the lower level. It had snowed about 6"-8" the evening of their shift. Employee slipped on the second to last stair landing on their back. On their way home employee felt a sharp strong pain in their mid-back when moving.

Miner was called in to repair the splice in a belt. After completing the repair and reassembling the equipment, the miner checked the belt's operation. While inspecting the belt, the miner accidentally stepped on some clinker on the ground, causing them to slip and hyperextend their knee.

While descending a portable ladder, an employee missed the last steps and landed awkwardly on the ground, resulting in a knee injury. The employee was promptly attended to and received medical evaluation.

Employee was welding on the ground level, suddenly EE turned to the opposite side of work area and tripped over a piece of wood lying on the ground. EE fell placing hand on the edge of a structural component H-Bar 3" flange x 4" x 6" base, the sharp edge of the material caused a deep cut in EE's right hand. EE was wearing all the PPE and proper gloves.

Employee was at TT1 Transfer belt when EE's head came into contact with a cross member beam. The employee tripped and fell to the ground where EE suffered an injury to their ankle.

The Employee was blow drying the ceiling in the air compressor, cleaning the debris

Miner was working in the quarry, exited excavator. While walking back, miner tripped over a rock. Miner landed on shoulder injuring the shoulder and thumb. Miner was treated and released to work restrictions within the miner's normal work duties. On October 4th, miner had surgery to repair the shoulder injury and placed off work.

The employee was descending a ladder in a hurry and missed a step going down. Therefore, the missed step caused them to grasp the ladder with their left hand.

Miner mis-stepped on uneven working surface and inquired their left ankle.

Miner was walking around the corner of the mill building, slipped on ice and caught themself awkwardly. Miner incurred knee strain and declined initial medical treatment until 11/7/23. Clinic prescribed work restrictions and physical therapy.

Electrician using a ladder 15 feet in the air asked spotter who was holding ladder to retrieve a different tool. When spotter let go of the ladder it slipped out from underneath EE. Electrician was using fall protection, the force of EE stopping caused strains in EE's back and hip.

A visiting GCC EE had exited a company Pickup truck and was walking to the Maintenance Shop entrance. As EE was stepping up on to the sidewalk apron (approx. 6" high) EE caught the toe of EE's boot on the sidewalk lip and fell forward. The resulting impact of the fall fractured EE's right hip requiring surgery to repair the hip.

Employee was descending from control room on a 7 ft ladder with 10 inch tread spacing when the employee misstepped on the 3rd from the bottom rung falling 30 inches to the mid platform and against an electric motor box. Bruised back and ribs. Restricted duty.

Employee climbed on top of the the screen shaker to remove a stray piece of conveyer belt and while doing so EE stood on top of the edge of the shaker and lost EE's footing and fell backward onto a covered motor hurting EE's lower back.

Miner strained right knee while stepping down from a ladder.

Employee was walking around the corner, rolled their ankle on a chunk of coal.

THERE HAD BEEN A SNOW STORM THROUGH THE NIGHT SO A LOADER HAD PUSHED THE TRAVEL WAYS OF THE SURFACE WORK AREAS. EMPLOYEE WAS WALKING TO THE ROCK PICKING PLATFORM AND STEPPED ON AN ICY SLICK AREA. EE STATES TWISTED LEFT ANKLE RESULTING IN A SPRAIN INJURY.

While walking from B Belt up C Belt, slipped with coal on floor and twisted knee.

Climbing extension ladder to get platform on front of crusher to check main belt take-up adjustment. Slipped and/or lost footing and fell about 8' on back.

Disposing excess raw material in appropriate pile. Tripped over unseen rock and fell on left side, elbow, arm and shoulder.

Cleaning off a table in the raw mill, employee stepped over wheel, leg got stuck and twisted ankle.

Employee was walking across the plant and slipped on ice. EE hit their head, which required 4 staples.

When attempting to open difficult railcar out gate, employee applying pressure to bar lost EE's balance when the gate came loose. EE fell to the side, same level, rolling EE's right ankle.

Employee was standing on a 3' high trailer, taping a tarp cover over a motor. EE's glasses fogged up due to wearing a mask, and when EE went to take a step EE fell off of the trailer, hurting EE's shoulder.

Employee was climbing down out of a haul truck, while holding jacket in one hand, and EE missed the grab handle and fell backwards to the ground.

Employee was pre-shifting belt line, stepped flat footed on a piece of coal or in a hole, hyperextending EE's left knee. Employee returned to regular job at full capacity. Employee's pain increased overtime so employee visited the doctor. MRI results received 9/17/2020 revealed surgery would be required to repair meniscus.

EE lost footing while they bent over to pick up an extension cord in front of the main office building. The EE caught balance by placing their right hand on the rim of a metal drain cover. EE sustained a laceration to the web of the thumb requiring 6 stitches. EE was released with no restrictions.

Stepped over a snow pile and slipped on ice.

Slipped on ice and pulled something in groin area.

Walking from parking lot to building, stepped on ice, slipped and twisted both knees.

Stepped up on curb and slipped on snow covered ice, breaking left wrist.

Weather was blizzarding with heavy winds. Miner was climbing onto a locomotive with snow on the step and slipped. EE tried to catch self, but fell with all of EE's weight on EE's right arm.

Employee was walking out ot the blend silos and when thee stepped down off of the curb they rolled an ankle. There was a large pile of dirt that they tried to step around so they stepped down wrong.

Employee was measuring coal piles in the long shed and lost footing due to loose material. Employee split legs and felt pain in pelvic area upon recovery of fall.

Employee tripped over the edge of the sidewalk in front of the mine office while coming back from the food truck and scraped knee.

An employee parked a truck underneath the muck chute to load kiln brick. The steps of the truck were even with the edge of a concrete pad with a two inch difference to the ground. Employee stepped out of the truck, foot was not squarely on the even surface. As they put full weight on that foot, it rolled to the lower surface causing a sprain to the ankle.

Was walking up the stairs and stepped off of and rolled their ankle.

Electrical contractor fell thought ceiling tile while running electrical wiring for new motor control panels. Miner did not use the fall protection harness and misjudged the stability of the ceiling tile to hold ee's weight. Miner was trained on fall protection use. Miner sustained fractures to head and left wrist from the fall.

An external truck driver was attempting to go up the driver platform to shut the hatches, upon attempting to climb the steps they slipped and fell on the stairs. Since this is not an employee I am not sure of the exact start time of the shift.

Climbing across railcar ladder, foot slipped or missed step and employee fell approximately 5ft. Trying to catch self, injuring right wrist.

Hands were full, slipped off of step going upstairs. Hit left shoulder and chin (face).

Employee was climbing up and down the ladder at the crusher trying to get it started and on the third try employee's foot slipped from the ladder and employee twisted employee's lower back causing a strain.

Operator stepped off of the loader ladder and the floor was not even and they twisted their ankle.

While patching a hole in the coal silo, and while coming down the ladder ee missed the last step and fell.

Employee was unloading Baker Test Equipment from back of Ford pick-up truck. Employee set the unit on the ground. Employee lifted unit with right hand and started toward finish mill hydraulic room. As employee placed employee's right foot on concrete downward step, employee felt employee's right knee give way.

I was changing bags in Dust Collector and moved to the hand rail to tie rope on handrail and turned around to move back across the steel flooring and caught my foot on old cage that was on the floor and lost my balance and hit the floor with shoulder.

Carrying an extension ladder, my foot got hooked under the rim. I fell forward and landed on my right shoulder and hip.

I was checking on finding some Anti Freeze and I stepped off of a pallet onto the oil pit storage grating. The grating wasn't laying down all the way and it flipped and I fell into the oil pit. Please note:Employee did not report the accident until 11/28/2016

Employee stepped out of truck and when ee put right leg down, knee buckled and ee went down to the ground. EE states that ee cannot move right leg below the knee.

Tripped on step in ER Room while exiting, fell on step and hit back and rib cage. Employee stated EE was fine and did not need a doctor's care.