Buscar en el registro

Employee was walking down stairs, He began to fall and reached for hand rail. His falling weight caused him to strain his right triceps.

Employee fell approx 18 inches when he lost his balance when climbing on to equipment. He hit the back of his head on the ground causing a contusion.

Employee was walking on a pile of 4 inch stone when he slipped and twisted his right knee. Injury was not reported to the Company until 07/19/2012. He was diagnosed with a meniscus tear but elected to post pone surgery until winter shut down. His first day of missed time was 1/15/13.

Employee was helping remove a crusher when he tripped & fell resulting in a strain to lower back.

While climbing ladder to get into a front-end loader, employee slipped and scrapped his lower leg. On 7/21 he indicated leg was swollen and was sent to medical clinic for treatment diagnosis: cellulites

Employee was kicking a breaker bar to loosen a drain plug when he slipped. Employee stated he was still feeling pain in October and was sent for an MRI on 10/8/2009 which revealed an ACL Tear.

Employee was climbing out of a chute under #4 shaker when he felt a "Pop" in his right knee. Diagnosis: Right Knee Strain - possible Medial Meniscal Tear.

Employee was climbing down the counter weight ladder of a front end loader. He missed the last step and fell to the ground causing a bruised sacrum.

Employee climbed over a "Keep Out" barrier on crusher and fell approx 17 feet thru a hole in decking. Causing concussion, sprain, fracture & contusion.

Employee was walking from the parking lot to the time clock when he slipped and fell on ice causing a left shoulder sprain.

Employee was climbing a ladder of a 988 loader for Am Start-up. His hand slipped off the hand rail causing him to fall backwards, landing on his back. he received a lower back strain,

While climbing into a crusher, employee's left foot slipped off the feed distributor and he struck his left knee against the side of the crusher causing a contusion to knee.

Employee was standing on a 5 gallon pail that he was using as a platform to do some welding work. He fell off causing bruising and contusion to his lower back and right knee.

Employee slipped and fell on icy walkway, causing a pulled muscle in his lower back.

WHILE CLIMBING DOWN FROM THE BACK OF THE WELDING TRUCK, THE EE'S FOOT LANDED ON A SMALL ROCK, TWISTING HIS RIGHT ANKLE.

EMPLOYEE WAS WALKING TO HIS CAR WHEN HE SLIPPED ON ICE.

EE WAS WALKING DOWN STEPS WHEN HE SLIPPED ON MUD AND FELL CAUSING LOWER BACK STRAIN.

WHILE REMOVING DECKING PRIOR TO REMOVING STANDARD CRUSHER, EE FELL THROUGH OPENING. EE WAS NOT AT HIS ASSIGNED WORK STATION.

WHILE CLEANING DIRT OFF SHAKER EMPLOYEE SLIPPED STRIKING HIS SIDE AGAINST SHAKER SCREEN.

WHILE EMPLOYEE WAS PULLING A NEW PULLEY UP THE 11/2" CONVEYOR HE SLIPPED DOWN TWO STEPS AND FELL AGAINST THE HAND RAIL.

WHILE WALKING AROUND LOADER DURING PRE-TRIP INSPECTION, EMPLOYEE SLIPPED ON ICE.

EE WAS COMMING DOWN STD. TOWER STEPS AND SLIPPED ON ICE 3 STEPS FROM BOTTOM AND STRUCK HIS TAIL BONE ON REMAINING STEPS.

WHILE CLIMBING DOWN STEPS ON A 992 LOADER, EE SLIPPED AND CUT HIS SHIN ON FLOOR BOLT.

EMPLOYEE STATED HE TRIPPED ON A ROCK.

EMPLOYEE STEPPED OFF A LADDER AND HIS FOOT TWISTED.

EE SLIPPED ON ICE.

WHILE PULLING A HYDRAULIC JACK, EE SLIPPED ON ICE.

EE WAS GOING UP CONVEYOR STEPS WHEN HE SLIPPED AND FELL.

EE JUMPED OFF THE LAST STEP OF A CONVEYOR LADDER AND HURT LOWER BACK.

EE WAS CHECKING FLUIDS ON HYDROSEEDER TRUCK WHENHE FELL OFF FRONT BUMPER

EE WAS CHECKING OIL LEVELS ON 992D LOADER WHEN HE FELL OFF THE COUNTER WEIGHT CAUSING TORN ACLS BOTH KNEES.

EMPLOYEE SLIPPED OFF LADDER FALLING 2 FEET CAUSING SIATICA TO LOWER BACK.

EMPLOYEE WAS WELDING WHEN HE SLIPPED DAMAGING HIS KNEE.

EE TRIPPED OVER TRUCK BUMPER LOG.

EE WAS CLEANING OUT A CHUTE WHEN HIS FOOT SLIPPED CAUSING HIM TO FALL FORWARD STRIKING HIS RIGHT FOREARM & WRIST.

EMPLOYEE TOLD SUPERVISOR THAT HIS BACK WAS STILL HURTING FROM A 12-11-95 FALL.

EMPLOYEE STEPPED OFF A WORK BENCH AFTER HE HAD SWEPT IT.

EMP WAS WELDING WHILE STANDING ON A CHAIR. WHEN EMP REACHED FOR ANOTHER WELDING ROD, HE FELL.,

EE WAS STRAIGHTENING A BRACE ON A PLATFORM WHEN IT BROKE LOOSE, CAUSING EE TO FALL.

EMPLOYEE JUMPED OFF #3 SHAKER & LANDED CROOKED ON LEFT FOOT.

EMPLOYEE WAS DRILLING 6FT ROCKS WHEN HE WENT TO GET DOWN IS FOOT SLIPPED & HE FELL BETWEEN TWO ROCKS

EMPLOYEE WAS DRILLING A HOLE ON A 10' ROCK WHEN HE JUMPED DOWN HE FELL ON HIS SIDE WHEN HE LANDED.

EMPL CLIMBING DOWN FROM BULLDOZER AFTER STARTING IT WHEN HE SLIPPED OFF TRACK.

EMPLOYEE STATED THAT WHILE HE WAS CHANGING A SCREEN THE SCREEN FELL AND HE FELL WITH IT LANDING ON HIS SHOULDER. ROTATOR CUFF INJURY TO LEFT SHOULDER.

EMPLOYEE WELDED A STEP PLATE TO STAND ON WHILE WELDING IN THE PORTABLE CRUSHER.THE PLATE DID NOT HOLD CAUSING THE EMPLOYEE TO FALL.

EE WAS PUTTING UP NO HUNTING SIGNS ALONG QUARRY FENCE LINE WHEN HE STEPPED IN A HOLE AND STRAINED HIS BACK AND KNEE.

EMPL WAS ATTEMPTING TO CLIMB APPROX 3' STEP WHILE CARRYING PIECE OF ANGLE. HAND SLIPPED & HE LOST BALANCE. EMPL FELL & LANDED ON ARM.

LIFTING WOOD TIMBER,EMPL SLIPPED AND PULLED MUSCLES IN BACK.

EMPL SLIPPED ON ICE & HIT HEAD ON CONCRETE BLOCK. ACCIDENT OCCURRED AT TRAP ROCK INDUSTRIES INCS PENNINGTON QUARRY.

SLIPPED ON GRADER AND HURT RIGHT KNEE.