Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
A 2-yard LHD bucket was slung under the Chippy Hoist skip being hoisted up the Jewell Shaft. A guide shoe came loose causing the bucket to rotate into and tearing out 2 shaft guides causing the bucket to lodge into the timber. 4 shaft crew members riding inside the skip were uninjured but briefly stranded before being transfered to the adjacent Double Drum Hoist skip.
Employee was exiting 2 yd loader, slipped on mud on step, lost balance & banged right elbow on loader. Medical treatment included therapy. Employee reported injury on 8/5/08 but didn't seek medical attention until 8/19/08.
The employee was installing rock bolts in the back with a jackleg drill. After collaring a hole the EE briefly looked away. When he looked back, a rock had come loose and it bounced off the machine hitting the employee in the upper lip. The result was cut lip that required sutures and a chipped tooth.
Employee was working to repair a plug on an underground locomotive. He inadvertently let the positive and negative battery leads make contact. The contact created an arc which caused burns to the left hand. The employee received medical attention that included prescription medication.
The hoist operator of the Jewell Shaft double drum hoist was lowering three employees down the Jewell Shaft when he noticed a spike in the reading on the hoist amp guage. He immeditely stopped the hoist and the hoist was not moved again until personnel went down on the chippy hoist to do a visual inspection of the shaft & the skip the employee's were riding on.
EE was bolting the footwall area of his heading, when the slab fell into the jackleg and pushed EE against the opposite rib, causing injury to his right shoulder.
Employee was pushing a metal shipping crate loaded with supplies onto the skip in the shaft. As he pushed the crate onto the skip, the loaded supplies shifted pinching his finger (left pinky finger) between the supplies and the shipping crate. Resulting injuries were torn fingernail and broken bone in finger tip.
The employee opened a man-door leading into the shop area. After stepping through the man-door the employee had his hand resting on the door frame while he attempted to unlatch the large shop door. The man-door swung shut and pinched his hand between the door and frame. This caused a laceration on the ring finger of the right hand requiring sutures.
The employee was showering at the end of his shift and was washing his face when he felt a foreign object in his left eye. This injury did not involve any aspect of compliance with rules & regs, nor did it involve mine equipment or the mining system. It did not involve the skills, profiency, training or attitude of the miner. PPE does not apply due to location of injury.
The employee was in the mine dry changing into his work clothes to start the shift. While trying to pull his work pants on he lifted one of his legs and pulled something in his back. After seeking medical attention the employee was put on lifting and work restrictions.
A valve on a slurry discharge line was inadvertently left closed, causing a pump line to build enough pressure to leak out of one of the fittings. The EE was not wearing safety glasses as required. Some slurry containing lime got into the EE's left eye, causing discomfort. The EE received medical attention, including prescription medications.
The employee was operating a 22B track mucker in a track drift heading. While mucking along the left side of the rail the mucking machine became unstable and tipped, briefly pinning the employee between the machine and rib.
The employee was using a nail bar to pull a nail out of a timber, the nail bar slipped off of the head of the nail and struck the employee above the left eye.
The Chippy hoist operator was bringing an empty skip up the shaft at normal operating speed. As he started to set the brake to slow down, the brake system fully engaged, causing the hoist to immediately stop. This caused the wire rope to whip and jump off of a sheave wheel.
The employee was lifting a tarp off of some cable spools and apparently disturbed a nest of wasps. The employee got stung 3 times and began to show signs of an allergic reation so he was transported by ambulance to a hospital where he received medical treatment.
The employee was taking a broken clamp off a length of pipe. His arm came in contact with the pipe as he tried to remove the clamp and a metal splinter became imbedded in his left arm.
Miner had completed installing a 6' resin bolt. Miner was lowering the jackleg drill. The driver hung on the installed bolt and dropped as the drill was lowered. The bolt dropped and hit the miner's little finger on his right hand which was on the drill. It struck the little finger between the knuckle and the first joint causing a fracture of the bone.
The EE was working in the surface carpenter shop cutting wood on a table saw. The cut off piece of material began to hang up in the saw blade & the EE reached for the piece of material, resulting in one of his fingers making contact with saw blade.
The EE was walking between the rails in a track drift and stepped in a hole, between two rail ties, twisted his left knee.
Driller was moving drill to new azimuth. Had hooked cable end hook to drill, sticking hook in top of pipe on drill. When pressure was applied to cable to pull drill, the hook slipped out of pipe and snapped back, striking the driller on the right cheek of his face.
The employee was working on transporting some old, partially filled 8"steel pipe. In the process of offloading the pipe from a timber truck by hand he tried lifting one end by himself & strained muscles in his left hip.
Removing two poles which were hooked to a crane to lift poles out of the way. The first pole was sawed off. As the second pole was being sawed, the load shifted and employee was not able to get out of the way fast enough. The pole bumped him and he fell head first into the hole dug for the replacement pole resulting in two stitches in the forehead.