Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee bolting in #7 entry received laceration to right arm from bolt plate while installing roof support. Received 5 stitches to laceration.
The employee was flipping the lid of a grid box when they felt a sharp pain in upper left arm. They requested help from company EMTs and was then transported to hospital. The hospital released them that night and advised them to follow up with Primary Physician and placed them off work until 4/4/2026. The employees Primary put them off work until they are cleared from Orthopedic.
Employee travelling in Intake portal was walking to EE's ride when EE slipped and fell on EE's right ankle causing a fracture in EE's right distal fibula.
The Employee hit a rock in the road while grading, bringing the grader to an abrupt stop. EE continued to work but complained of pain in EE's neck, legs, and feet. Went to the hospital the next day, had X-Rays and issued Physical Therapy. The extend of EE's condition is unknown at this time.
Employee went to move welder cable in tool sled. Picked up a wad of cable as they stood to throw it out of the way had pain in lower back then in left groin.
While removing access stairway from RT62, with the top of stairs attached to a boom, and the bottom welded. The employee forgot to remove the top two bolts, they went back up the stairway and when they removed the bolts, the weld at the bottom broke and the stairs shifted causing them to fall to the ground. The employee suffered a fracture on the radius of their right arm.
Employee was installing roof support when finger was smashed between the drilling arm and the bolt head on the canopy post of the bolt machine.
The Employee was going to turn off the water valve after filling up the tank on EE's steam truck. The employees foot slipped and EE caught self, felt a sharp pain in lower back. Went to the doctor a few days later x-rays shown nothing, given time off with meds.
Employee was walking on a drill bench and stepped into a drill hole felt a pop in right knee but continued to work. On 9/10/2025 the employee was taken off work by their doctor for torn Meniscus.
After climbing up on to the track of a Dozer, the employee was attempting to latch the drop-down handrail when the handle broke and they lost balance and fell. The employee was taken to clinic, employee has fractured Spinous Process, given medication and rest for a week.
The employee went to the hospital on 8/25/2025 suffering from numbness in left arm and leg. They told management that they were running tests for stroke and other possible issues. They stated getting jarred in an excavator on the 8/23/2025 but didn't feel it was related. Came back to work for three shifts and took off again for a strain in their neck and numbness in left arm.
Employee was tightening a pipe union. The wrench slipped off. The employee later stated that EE's elbow was hurting.
Employee was performing maintenance on a GMC 645 service truck. While in the process of walking around the front of the service truck EE inadvertently stepped on a rock causing EE to "roll" EE's ankle, fracturing the right ankle.
A unplanned roof fall occurred on the 2 North Mains at Break 47,in the #1 Entry , 120 Ft Inby Spad 3512. There was NO Injuries, did not affect ventilation or passage of persons. Fall is being dangered off and breaker timbers are being installed at all approaches. Fall Measures 80' Long , 18-20' wide , 6-10'high
Employee stated EE was helping to strip the red phase lead in the High Line preparing to enter the High Line into the #3 Outby KVA. As EE was stripping the lead EE's knife blade slipped causing a laceration to EE's left thumb. Employee sought medical treatment and received 5 stitches.
Employee was driving to the Coal pit and hit something in the road, EE was jarred and said EE's back and leg was hurting. Went to EE's Dr. and was given days off to rest.
Employee was exiting the Number 2 truck dump slipped on the step and fell. EE went to Logan medical center and x-rays show a fractured rib.
Employee was changing a starter on a Rock truck; they had the starter placed on a step ladder. The starter rolled off and landed on their left foot behind the steal toe. Employee went to the doctor had a bad bruise told to rest.
Employee was walking around equipment steam cleaning, stepped into a low place and twisted EE's ankle. Had x-ray and told to take off work for a sprain ankle.
Employee was operating an excavator above an embankment, when the excavator began sliding down the bank. EE tried to swing the boom around to stop the slide, but the excavator rolled onto its side. EE was taken to the hospital where the x-ray revealed a compound fracture of the T-12. EE was given meds and sent home; EE is awaiting an appointment with a neurologist.
Employee was working on a rock truck when a cordless drill fell from the top of the engine and landed on EE's right hand causing a fracture to the end of EE's finger. EE went to the ER and had a splint placed on EE's injured finger.
Employee was operating a tractor trailer coal truck when they hit a rough spot in the road. Lower Right back began hurting, EE was taken to PMC hospital. The employee was x-rayed, given medicine and taken off work for a strained back.
The operator got off the PC5500 Excavator to relieve themself and when operator turned to walk back to the ladder, operator ran into the lube arm that was down for the service. The operator suffered a cut on the left side of head just above the temple.
Employee was trying to flip a D11 cutting edge over and the crowbar slipped out of the cutting edge causing them to slip and fall on a strut that was laying on the ground.
Employee was operating a D10 T Dozer when EE backed over a rock and jarred self. The employee went to the ER the next day took off a couple days came back to work and is off again awaiting an MRI.
An Unplanned roof fall occurred in the #5 Entry in the North Mains at Break 18-19, Fall is approximately 3,000 ft from section, Fall Measures 20'W X 50'L X 6-10' H. The fall will not be rehabilitated, fall did not affect ventilation or passage of persons. All entrances have been dangered off and cribbed.
Employee picked up a piece of metal and stated EE felt something pop in their left shoulder. The Employee continued to work, and said it was ok. On 1/24/2025 EE informed the foreman that EE had scheduled a surgery for their shoulder for 1/28/2025.
A unplanned roof fall occurred in the #3 entry in the #1 North Mains, between break #40 and #41 , 50' Outby spad #3476 fall measures 20'x 50' x 6-10'high.Fall did not affect passage of persons or ventilation. All entrances had been dangered off and cribbed prior to fall.
An unplanned roof fall occurred in the 1 North Mains outby the section 2800' at break number 23, 100' inby spad # 3359. Fall Measures approx 200' L X 20'W X 5-13' in height. Fall did not affect ventilation or passage of persons, fall will not be cleaned up, all entrances have been dangered off and cribbed.
Employee picked up a bucket of miner bits. When EE turned, felt a sharp pain in the lower back. Employee said it was an old injury from a previous employer.
Employee was working on personal vehicle in the mine parking lot. While changing the brakes, the vehicle fell off the car jack and onto EE's right lower leg. EE was transported to the hospital by ambulance and received stitches, x-ray (nothing broken) and treated with medication.
Employee was walking through crosscut at break 36 on the #3 Belt line, slipped and fell landing on their left leg which resulted in an ankle fracture
Employee was installing Roof Bolts, while trying to insert drill steel in drill chuck EE felt something pull and a burning sensation in shoulder
Unplanned roof fall occurred on the # 3 Belt Panel, in the #1 Entry inby spad 3495 extending 2 breaks inby. Fall Measured 220'x20'x7-10'. Fall will not be cleaned up but area around fall will be rehabilitated
The employee was climbing back onto the Dozer, EE's foot slipped off the step next to the engine and EE's left leg fell between the track and the frame. EE's knee struck against the track causing a fracture. EE was taken to the hospital by ambulance and treated for the fracture.
Employee was rolling up the grease line when EE lost control of the hose, the handle caught EE's hand and caused a strained tendon.
Employee was operating a rock truck when EE hit a bump in the road and said it jarred EE around. The employee went to the Doctor the next day complaining of back pain. X-ray showed bulging disk, waiting on an MRI.
Employee was using a spoon attachment on a Bobcat. When EE emptied it, the spoon came off and fell inside the Bobcat hitting EE's right knee.
Employee was operating an 830E Komatsu Rock truck. While being loaded a rock slipped out of the bucket hitting the top side rail of the truck bed jarring the Employee. The employee went to the hospital complaining of back pain and tingling in right foot.
Employee was conducting a pre-operational exam of EE's truck. EE raised the hood and felt a sharp pain in EE's back. EE continued to work for a few hours and then went to the hospital. EE was treated for a strain and given a couple days off to rest.
Employee was cutting a piece of angle iron with a grinder. The grinder kicked back and struck the employee in the left lower leg causing an approximate 2-inch laceration which required 12 stitches.
Employee was removing Struts on a rock truck. The left strut had been removed and EE was cutting the bottom pin out from the right Strut. The right strut moved when they cut through the pin. They stepped back and tripped over the new struts laying on the ground behind them. They landed on the second strut cracking a rib and vertebra.
Drill was snow covered and turned into ice overnight. While working on drill, the back door wouldn't open, so the technician moved to the back left corner to continue working, when standing up from back left corner, feet slipped on ice causing technician to twist left knee.
SECURITY GUARD WALKING BACK TO GO INSIDE GUARD SHACK AND TRIPPED ON CEMENT EDGE OF PORCH THEREFORE FALLING AND INJURING WITH A KNOT ON HEAD AND 2 BROKEN ARMS PER ARMS SUPERVISOR STATED EMPLOYEE HAD TOLD SUPERVISOR AFTER TREATMENT
Employee was climbing upon a Rock Truck, when EE's foot hit the first platform on the lower level EE's foot slipped and EE lost grip falling on to the ground approximately 3-4 feet on EE's left side. EE was transported to the Hospital and later released that evening.
Employee was shoveling tracks on an excavator, felt pain in their lower back. Went to the doctor the next day and was told to rest a couple days.
Employee stopped EE's service truck in an area where a drill had been repaired. When EE walked around to shut a cabinet door EE stepped into a drill hole. EE received a sprain left ankle and a small fracture in EE's foot.
Employee was working on a drill, EE slipped and fell in the walk way hurting EE's left ankle. Employee went to the hospital X-rayed and given time off to rest.
Employee bent over to pick up a wash hose and felt something pull in left side/back. Employee went to the hospital and was diagnosed with a strained muscle.
One break from the face the employee was trying to move a cable and felt pain in their back.