Buscar en el registro

Driver backed over the dump, flipping the truck. He was told not to back out but he did anyway. He caused approx. $30,000 cosmetic work to coal truck.

Employee was climbing into powder truck cab when he slipped and fell backwards. Employee tried to catch himself with his right hand. Broke bone in hand.

EE was welding on dozer blade. Dozer blade was blocked up and blade fell from blocks, hitting EE's right knee and injuring ankle.

Employee was servicing equipment when grease gun splattered grease into employee's eye.

Employee was assisting with repairing 1100 excavator when he jumped from track of 1100 to get a shovel, thus injuring knee.

Employee tripped and fell on deck of R-65 while hooking up jumper cables. Hurt his back.

EE was working an old slide in Hollow when the dirt above slid down on excavator- EE is okay

Employee was traveling access road to get to the drill when the road broke off and turned over the truck he was traveling in.

EE was installing flooring on the 4th level of prep plant when he tripped and fell forward causing him to fall down to the 3rd level. He broke the lower right leg below the knee and cut his left wrist requiring 12 stitches.

Employee missed step while climbing down from dozer, hitting the push arm on the dozer while falling, landing on right hand and ribs.

drill operator climbing on front of drill steps when he lost his footing, falling on pit floor, falling backwards 4 or 5 feet.

DOING REPAIR ON EXCAVATOR BUCKET; PIECE OF METALSLIPPED; CUT & BROKE 3 FINGERS ON LEFT HAND

REMOVING ENGINE COVER ON DOZER WHEN WELD BROKE ON COVER- HITTING RIGHT ARM

FELL WHILE ENTERING EXCAVATOR.

EMPLOYEE STEPPED ON ROCK TURNING ANKLE, CONTINUED WORKING UNTIL LUNCH BREAK, FOOT STARTED SWELLING.

EMPLOYEE SAID HE HURT HIS STOMACH THREE OR FOUR WEEKS AGO WHILE WORKING ON EQUIPMENT. HE HAD BEEN PULLING WHILE WORKING ON TRUCK TODAY WHEN HE SUDDENLY COLLASPED IN PAIN.

EMPLOYEE REPORTED HE HURT HIS LEG WHEN EXITING HIS TRUCK(HAUL-BACK) AT QUITTING TIME.

DOZER SLID INTO DITCH, TURNING ON ITS SIDE.

DRIVING COAL CHISEL BETWEEN TWO PIECES METAL WITH SLEDGE HAMMER CHISEL FLEW OUT HITTING ME ABOVE EYE R ESULTING IN CUT THAT REQUIRED 4 STITCHES TO CLOSE WOUND ALSO BROKE NOSE

PICKED UP AUGER FLITES WITH LOADER.CHAIN BROKE HIT HIM IN BACK AND HEAD.

EE WAS HOLDING STRAP WHILE BOLT MACHINE WAS PUTTING IT UP. IT CAME LOOSE AND HIT HIM IN THE EAR.

HE THOUGHT HE WAS HAVING A HEART ATTACK

I WAS TOLD THE MORNING OF 11-15-93 BY EE THAT HE HURT HIS BACK ON 11-11-93 WHEN HE BACKED INTO A TREE STUMP WITH A DOZER WHILE WORKING ON ROAD AT REFUSE PILE.

HE TURNED DRILL ON BOLT MACHINE ON AND IT CUT HIS HAND.

MINER'S KNEE.

EE TURNED AROUND WHILE RUNNING THE 506 CARRIER & PULLED OR STRAINED A MUSCLE

CLIMED UP ON BACK AT LOADER TO CHECK WATER RADIATOR CAP CAME OFF HOT WATER BLOWED OUT HE FELL OFF HURT BACK ARM & BURN NECK & BACK.

EE WAS HELPING COWORKER LIFT HYDRAULIC PUMP OUT OF A ROOF BOLTER.

EMPLOYEE WAS PULLING WATERLINE UNDERGROUND AND FELL ON HIS LEFT KNEE CAUSING INJURY TO TO.

EE CAME INTO HARLAN LOCAS MAIN OFFICE 2/15/93 AND STATED TO EE AND OTHER THAT HE STARTED HAVING PAIN IN NOV.92' IN HIS LEFT HIP, LEG AND FOOT, HE ALSO STATED THAT HE HAD TO STOP WORK FEB. 4 10 993 AND GO TO DR.

INJURED WAS HELPING CARRY METAL IN SHOP AREA AND FELL BACKWARDS OVER ATRUCK RIM.

CRAWLING BY DOLLY. HE PUT HAND ON DOLLY AND DOLLY MOVED BACKWARD PINNING ARM AGAINST TOP.

DUE TO STRUCTURAL FAILURE COAL BIN #2 COLLAPSED CAUSING I.NAME TO BE COVERED UP WITH COAL.

SETTING TIMBERS ON BELT LINE & A PIECE OF ROCK FELL ON LEFT HAND MASHING LITTLE FINGER

EE WAS WALKING TO RESET BREAKER FOR MINER & BUMPED HIS HEAD ON A ROOF BOLT

A ROOF BOLTER PUT TING UP BELTS HURT HIS KNEE WORKED REST OF SHIFT CALLED IN ON 10-23-92 WITH SORENESS

TWO TRUCKS MET IN CURVE HIT HEAD ON BRUISE KNEE SORE NECK SHOULDER

CROSSING BELT LINE SOMEONE STARTED BELT

20457LANNED ROOF FALLS. 1ST FALL OCCURE DINT EH #3 INTAK ENTRY FROM THE #22 CROSSCUT TO THE #24 CROSS CUT APP. LENTH 180'X20'WX6'THICK 2ND FALL OCCURE DINT EH #2 INTAKE ENTRY BETWEEN #1 & #2 55398S AT THE #24 CROSS CUT. APP. LENGTH 70'X20'WIDE AND 6' THICK. BOTH FALLS OCCURRED APP 1300 FEET OUTBY FACE AREA.

38920IS A SEPARATE REPORT FOR THE 2ND ROCK FALL THAT OCCURRED IN THE #2 INTAKE ENTRY BETWEEN THE #1 & #2 ENTRYS AT THE #24 CROSSCUT THE LENGTH WAS APPROX 70FT LONG & 20FT WIDE & 6FT THICK IT O 33499ED 1300FT OUTBY FACE AREA THIS FALL WAS REPORTED IN REPORT SUBMITTED 08-20-92

WORKING ON SPEEDREDUCER ON BELT DRIVE & HURT BACK WHILE MOVING REDUCER AROUND

PUTTING WATERLINE TOGETHER AND CLAMP SLIPPED AND CUT HAND.

INJURED WAS GRINDING A TIP ON SLATE BAR, ONE END OF BAR CAUGHT ON GRINDER AND THREW HIS LEFT HAND INTO THE OTHER GRINDING WHEEL, THIS WAS A DOUBLE GRINDER.

WALKING THROUGH COAL PIT AND TWISTED LEFT ANKLE.

MOVING HEAVY EQUIPMENT IN OUTSIDE WAREHOUSE,PULLED A MUSCLE IN HIS BACK.

DRILLING TEST HOLE WITH BOLTMACHINE & PIECE OF CAP COAL FELL HITTING HIM & CAUSING A CUT ON THE RT SIDE OF FACE DOWN BESIDE HIS RT EYE

EMPL REPAIRING RIPPER CHAIN ON MINER,CHAIN BROKE. HE WAS KNOCKING OUT PIN WITH HAMMER AND A CHIP OF METAL FROM CHAIN LODGED IN RIGHT CHEEK 1" BELOW EYE.

ROOF BOLTING- CAUGHT HAND BETWEEN TOP AND HEAD MASHING HAND.

EMPLOYEE WAS BOLTING WHEN BOLTER JUMPED HITTING HIM WITH LEG.

EMPLOYEE SHOVELING COAL ON BELT,SAID HIS SHOULDER BEGAN TO HURT.